40 lines
1.7 KiB
Markdown
40 lines
1.7 KiB
Markdown
# Legacy Loader
|
|
The legacy loader only is another code path which, in the end, merges together
|
|
with the UEFI - code path again. It has no special purpose except of that one.
|
|
|
|
|
|
|
|
## Order of Working
|
|
The Nightloader's Stage 0 - Loader searchs for its partition which has the
|
|
type `0x9d` in the MBR (Master Boot Record).
|
|
|
|
It initializes a GDT (Global Descriptor Table) for going into 32-bit - mode,
|
|
making it possible to use more of the RAM. This is particularily useful for
|
|
loading the whole partition of the Stage 2 into RAM without having problems
|
|
with the memory limitations of the 16-bit real mode (which has 20-bit addresses).
|
|
|
|
Following that, it loads the 256MB of the NightLoader-partition into memory
|
|
at address 0x8000, or 32768 in decimal. If the partition has another size than
|
|
256MB, the Nightloader - Stage 0 will fail to load it.
|
|
If the partition isn't formatted correctly, the boot process will fail.
|
|
|
|
The Stage 0 - loader tries to find the path `/night/starter.bin` in its
|
|
partition and starts that executable code, which it loads to address 0x8000,
|
|
at its first byte.
|
|
|
|
Now, the Starter is working. Aforementioned executable code has one purpose:
|
|
load the ELF-executable of the actual Stage 2 - loader and start a function
|
|
inside of it which is named `main`. If such function does not exist, it should
|
|
display a debug-message which basically tells that the user needs a *very*
|
|
skilled technician right about *yesterday*.
|
|
|
|
|
|
|
|
## Current State
|
|
The Nightloader:
|
|
- can find its own partition in the Master Boot Record
|
|
- writes an error message onto the screen if it couldn't find its own partition
|
|
- does not go into 32-bit mode
|
|
- only loads 8 sectors (4096 bytes) of the Stage 2 - partition into the RAM
|
|
|