38 lines
1.3 KiB
Markdown
38 lines
1.3 KiB
Markdown
# controller.h
|
|
|
|
Communicates with the PS/2 controller chip.
|
|
|
|
**Warning:** This whole code needs to be reworked!
|
|
|
|
# `PS2_CONTROLLER_DATA_PORT` - macro
|
|
The data transmission IO port.
|
|
|
|
# `PS2_CONTROLLER_STATUS_PORT` - macro
|
|
The Status register IO port.
|
|
|
|
# `PS2_CONTROLLER_COMMAND_PORT` - macro
|
|
The command transmission IO port.
|
|
|
|
# `PS2_CONTROLLER_TIMEOUT` - macro
|
|
The amount of cycles the system waits for the controller before cancelling an operation.
|
|
|
|
# `ps2_controller_init()` - function (void)
|
|
Initializes the PS/2 controller and devices.
|
|
At the moment it trusts very much stuff blindly.
|
|
This needs to be changed.
|
|
The osdev wiki has a list of stuff to do while initializing PS/2.
|
|
|
|
# `ps2_controller_command(command)` - function (uint8_t)
|
|
Sends the PS/2 controller a command.
|
|
|
|
# `ps2_controller_command_with_data(command, data)` - function (uint8_t)
|
|
Sends the PS/2 controller a command that needs additional data on the data port.
|
|
|
|
# `ps2_controller_wait_until_ready_for_input()` - function (bool)
|
|
Halts until the status register says that there can be data read, or the timeout is reached.
|
|
|
|
# `ps2_controller_wait_until_ready_for_output()` - function (bool)
|
|
Halts until the status register says that there can be data written, or the timeout is reached.
|
|
|
|
# `ps2_controller_read_data()` - function (uint8_t)
|
|
Reads data from the PS/2 controller. |