# SysABI Syscalls are a way for programms to communicate with the kernel. To perform a syscall, you need to populate the following registers: | Register | Value | |----------|-----------------| | rax | The syscalls ID | | rdi | Argument 1 | | rsi | Argument 2 | | rdx | Argument 3 | | rcx | Argument 4 | --- The following calls should be implemented to some degree in noxos 1.0. # Categories ## Files | ID | Name | Description | Arg1 | Arg2 | Arg3 | Arg4 | Result | Status | |--------|----------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|--------|------|-------------|--------|-------------| | 0x0001 | `nx_fs_open` | Opens the file at the _len_ bytes long path _path_ and writes a file descriptor to the referenced file into _fd_ (which needs to be a pointer). | path | len | *fd | | status | Implemented | | 0x0002 | `nx_fs_close` | Closes the file which is indicated by descriptor _fd_. This should always be called, otherwise the OS will have to unload files without knowledge of usage. | fd | | | | status | Implemented | | 0x0003 | `nx_fs_read` | Reads at most _n_ bytes from a file given as descriptor _fd_ and at a specific position _offset_ into a given memory region _mem_. | fd | offset | mem | n | status | Implemented | | 0x0004 | `nx_fs_write` | Writes _n_ bytes from a given memory region _mem_ into the file referenced by _fd_ at the given position _offset_, not inserting but either overwriting existing content or appending to the file. | fd | offset | mem | n | status | Implemented | | 0x0005 | `nx_fs_delete` | Completely delete the file or folder at a given path _path_, which is _len_ bytes long. | path | len | | | status | Implemented | | 0x0006 | `nx_fs_list` | List all files and/or directories at the _len_ bytes long path _path_ and write their NULL-separated names into _mem_. When _mem_ is NULL, _needed_mem_ (which needs to be a pointer to an 32-bit integer) is filled with the appropriate value. | path | len | mem | *needed_mem | status | Implemented | | 0x0007 | `nx_fs_info` | Writes the information about the files attribute _attr_ into mem. Types of attributes are described below. | fd | attr | mem | | status | N/A | **Note:** The _len_ argument of paths isn't used at the moment, rather than using _len_, _path_ needs to be Null-Terminated. ## Memory | ID | Name | Description | Arg1 | Arg2 | Arg3 | Arg4 | Result | Status | |--------|------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|------|-------|------|--------|-------------| | 0x0101 | `nx_mem_alloc` | Maps _n_ 4KB pages to address _addr_. You can provide a bitmap of flags with the _flags_ argument. Which flags can be used, is described below. | addr | n | flags | | status | Implemented | | 0x0102 | `nx_mem_free` | Unmaps _n_ 4KB pages at address _addr_. | addr | n | | | status | Implemented | | 0x0103 | `nx_mem_label` | Gives a memory region a file descriptor, called a label, which can then be used for example for executing executable data in that memory region in a new process | addr | len | *fd | | status | N/A | | 0x0104 | `nx_mem_unlabel` | Takes the file descriptor away from a memory region. | fd | | | | status | N/A | ## Processes | ID | Name | Description | Arg1 | Arg2 | Arg3 | Arg4 | Result | Status | |--------|------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------|--------|----------|------|------|--------|--------| | 0x0201 | `nx_proc_create` | Creates a new process with the configuration _conf_ (which format is described below) and writes its process id to _pid_. | *conf | *pid | | | status | N/A | | 0x0202 | `nx_proc_signal_send` | Send the signal _signal_ to _pid_. See below for a list of signals. | pid | signal | | | status | N/A | | 0x0203 | `nx_proc_signal_set_handler` | Sets a handler for the signal _signal_ in the current process. Not all signals can have a handler. Look at the list for more information. | signal | *handler | | | status | N/A | | 0x0204 | `nx_proc_thread_create` | Spawns a new thread for the current process. The starting point is defined by _addr_. The threads' ID is written into _tid_. | addr | *tid | | | status | N/A | | 0x0205 | `nx_proc_thread_start` | Starts the current processes' thread with thread id _tid_. | tid | | | | status | N/A | | 0x0206 | `nx_proc_thread_pause` | Pauses the current processes' thread with thread id _tid_. | tid | | | | status | N/A | | 0x0207 | `nx_proc_thread_kill` | Kills the current processes' thread with thread id _tid_. | tid | | | | status | N/A | ## Drivers | ID | Name | Description | Arg1 | Arg2 | Arg3 | Arg4 | Result | Status | |--------|--------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|------|-------|------|--------|--------| | 0x0301 | `nx_drv_register` | Registers the executable at the _n_ bytes long _path_ as driver with the configuration _conf_. The format of the conf struct can be found below. | path | len | *conf | | status | N/A | | 0x0302 | `nx_drv_create_command_buffer` | This has to be called from a driver. Registers _addr_ as command queue buffer with the length _len_, which has to be greater or equal 16384. If _addr_ is NULL or not aligned to 32 bytes or _len_ is less than 16384, the kernel will map a command queue buffer into the drivers address space, which is of length _len_ but at least 16384. The address to the registered buffer will be returned. | addr | len | | | addr | N/A | | 0x0303 | `nx_drv_flush_command_buffer` | This has to be called from a driver. Flushes the command queue buffer at _addr_. | addr | | | | status | N/A | ## Kernel The kernel syscalls can only be called from the kernels main process [link to processing article needed]. If another process calls them, they will just return without doing anything. | ID | Name | Description | Arg1 | Arg2 | Arg3 | Arg4 | Result | Status | |-----|------|-------------|------|------|------|------|--------|--------| | | | | | | | | | | --- ## Appendixes ### Types of file attributes | ID | Name | Description | Data Type | Status | |-----|---------------|--------------------------------------------|-----------|--------| | 0 | `permissions` | Who has what permission to access the file | uint16_t | N/A | | 1 | `size` | The files size in bytes | uint64_t | N/A | --- ### Memory mapping flags | Bit | Name | Description | |-----|-----------|-------------------------------------------| | 0 | `write` | Enables write access to the mapped pages. | | 1 | `no_exec` | Prevents execution of the mapped pages. | --- ### Process configuration **header:** | Length(bytes) | Name | Description | |--------------------------|-----------------|--------------------------------------------------------------------------------| | 0x01 | privilege_level | Specifies the privilege level the process runs on. (described below) | | 0x80 | name | The processes' name (ascii). | | 0x08 | executable | A file descriptor to the executable the process will be loaded from. | | 0x04 | num_inherit_fds | The amount of file descriptors that will be inherited to the process. | | 0x0F * `num_inherit_fds` | inherit_fds | The file descriptors that will be inherited to the process. (described below) | **header.privilege_level:** | Value | Name | Description | |-------|-----------|-------------------------------------------------------------------------| | 0 | as_parent | The new process will spawn with the same privilege level as its parent. | | 1 | default | The new process will spawn with default user permissions. | **header.inherit_fds:** | Length(bytes) | Name | Description | |---------------|-----------|--------------------------------------------------------------------------------| | 0x08 | at_parent | The file descriptor, the parent process wants to inherit. | | 0x08 | at_child | The file descriptor in the new child process. Same as `at_parent` if set to 0. | ### Process signals - __SIGSTART__: starts the process - __SIGPAUSE__: pauses the process - __SIGKILL__: kills the process and destroys the processes data structures - __SIGEXIT__: send by the kernel before stopping the process - handler implementation possible - __SIGPFAULT__: sends when the process access memory it is not permitted to. Followed by SIGEXIT - handler implementation possible - __SIGMATHAULT__: sends when the process does stuff like dividing by zero. Followed by SIGEXIT - handler implementation possible --- ### Driver configuration **header:** | Length(bytes) | Name | Description | |---------------|--------------------|------------------------------------------------------------------------------| | 0x01 | transport_protocol | Specifies the protocol over which the driver communicates. (described below) | | 0x02 | length | Specifies the length of the `specific_config` section. | | `length` | specific_config | Configuration specific to the transport protocol. (described below) | **header.transport_protocol:** | Value | Name | Description | |-------|--------|------------------------------------------------------------------------------------------| | 0 | PCI(e) | The driver connects to devices on the _Peripheral Component Interconnect (express)_ Bus. | | 1 | USB | The driver connects to devices on the _Universal Serial Bus_. | | 2 | FS | The driver provides filesystem functionalities. | **header.specific_config.pci:** | Length(bytes) | Name | Description | |-------------------------|----------------|---------------------------------------------------------------| | 0x02 | num_vendor_ids | The amount of PCI vendor ids the driver can handle. | | 0x02 | num_device_ids | The amount of PCI device ids the driver can handle. | | 0x02 * `num_vendor_ids` | vendor_ids | An array containing all PCI vendor ids the driver can handle. | | 0x02 * `num_device_ids` | device_ids | An array containing all PCI device ids the driver can handle. | **header.specific_config.usb:** | Length(bytes) | Name | Description | |---------------|-------------|-----------------------------------------| | 0x01 | min_version | The minimum required major USB version. | **header.specific_config.fs:** | Length(bytes) | Name | Description | |---------------|----------|-------------------------------------------------------------------------| | 0x0F | gpt_guid | The gpt GUID of the file system type that the driver handles. | | 0x01 | mbr_type | The mbr partition type of the file system type that the driver handles. |