283 lines
7.4 KiB
C
Executable File
283 lines
7.4 KiB
C
Executable File
/*
|
|
* driver for NXP USB Host devices
|
|
*
|
|
* Currently supported OHCI host devices:
|
|
* - NXP LPC32xx
|
|
*
|
|
* Authors: Dmitry Chigirev <source@mvista.com>
|
|
* Vitaly Wool <vitalywool@gmail.com>
|
|
*
|
|
* register initialization is based on code examples provided by Philips
|
|
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
|
|
*
|
|
* NOTE: This driver does not have suspend/resume functionality
|
|
* This driver is intended for engineering development purposes only
|
|
*
|
|
* 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/isp1301.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
|
|
#include "ohci.h"
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#define USB_CONFIG_BASE 0x31020000
|
|
#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
|
|
|
|
/* USB_OTG_STAT_CONTROL bit defines */
|
|
#define TRANSPARENT_I2C_EN (1 << 7)
|
|
#define HOST_EN (1 << 0)
|
|
|
|
/* On LPC32xx, those are undefined */
|
|
#ifndef start_int_set_falling_edge
|
|
#define start_int_set_falling_edge(irq)
|
|
#define start_int_set_rising_edge(irq)
|
|
#define start_int_ack(irq)
|
|
#define start_int_mask(irq)
|
|
#define start_int_umask(irq)
|
|
#endif
|
|
|
|
#define DRIVER_DESC "OHCI NXP driver"
|
|
|
|
static const char hcd_name[] = "ohci-nxp";
|
|
static struct hc_driver __read_mostly ohci_nxp_hc_driver;
|
|
|
|
static struct i2c_client *isp1301_i2c_client;
|
|
|
|
static struct clk *usb_host_clk;
|
|
|
|
static void isp1301_configure_lpc32xx(void)
|
|
{
|
|
/* LPC32XX only supports DAT_SE0 USB mode */
|
|
/* This sequence is important */
|
|
|
|
/* Disable transparent UART mode first */
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
|
|
MC1_UART_EN);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
|
|
~MC1_SPEED_REG);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
|
|
~0);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_MODE_CONTROL_2,
|
|
(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_OTG_CONTROL_1,
|
|
(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
|
|
(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
|
|
~0);
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
|
|
|
|
printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
|
|
i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
|
|
printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
|
|
i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
|
|
printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
|
|
i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
|
|
}
|
|
|
|
static void isp1301_configure(void)
|
|
{
|
|
isp1301_configure_lpc32xx();
|
|
}
|
|
|
|
static inline void isp1301_vbus_on(void)
|
|
{
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
|
|
OTG1_VBUS_DRV);
|
|
}
|
|
|
|
static inline void isp1301_vbus_off(void)
|
|
{
|
|
i2c_smbus_write_byte_data(isp1301_i2c_client,
|
|
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
|
|
OTG1_VBUS_DRV);
|
|
}
|
|
|
|
static void ohci_nxp_start_hc(void)
|
|
{
|
|
unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
|
|
|
|
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
|
|
isp1301_vbus_on();
|
|
}
|
|
|
|
static void ohci_nxp_stop_hc(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
isp1301_vbus_off();
|
|
tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
|
|
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
|
|
}
|
|
|
|
static int ohci_hcd_nxp_probe(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = 0;
|
|
const struct hc_driver *driver = &ohci_nxp_hc_driver;
|
|
struct resource *res;
|
|
int ret = 0, irq;
|
|
struct device_node *isp1301_node;
|
|
|
|
if (pdev->dev.of_node) {
|
|
isp1301_node = of_parse_phandle(pdev->dev.of_node,
|
|
"transceiver", 0);
|
|
} else {
|
|
isp1301_node = NULL;
|
|
}
|
|
|
|
isp1301_i2c_client = isp1301_get_client(isp1301_node);
|
|
if (!isp1301_i2c_client)
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
goto fail_disable;
|
|
|
|
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
|
|
if (usb_disabled()) {
|
|
dev_err(&pdev->dev, "USB is disabled\n");
|
|
ret = -ENODEV;
|
|
goto fail_disable;
|
|
}
|
|
|
|
/* Enable USB host clock */
|
|
usb_host_clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(usb_host_clk)) {
|
|
dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
|
|
ret = PTR_ERR(usb_host_clk);
|
|
goto fail_disable;
|
|
}
|
|
|
|
ret = clk_prepare_enable(usb_host_clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
|
|
goto fail_disable;
|
|
}
|
|
|
|
isp1301_configure();
|
|
|
|
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
|
|
ret = -ENOMEM;
|
|
goto fail_hcd;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
ret = PTR_ERR(hcd->regs);
|
|
goto fail_resource;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = -ENXIO;
|
|
goto fail_resource;
|
|
}
|
|
|
|
ohci_nxp_start_hc();
|
|
platform_set_drvdata(pdev, hcd);
|
|
|
|
dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
|
|
ret = usb_add_hcd(hcd, irq, 0);
|
|
if (ret == 0) {
|
|
device_wakeup_enable(hcd->self.controller);
|
|
return ret;
|
|
}
|
|
|
|
ohci_nxp_stop_hc();
|
|
fail_resource:
|
|
usb_put_hcd(hcd);
|
|
fail_hcd:
|
|
clk_disable_unprepare(usb_host_clk);
|
|
fail_disable:
|
|
isp1301_i2c_client = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int ohci_hcd_nxp_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
usb_remove_hcd(hcd);
|
|
ohci_nxp_stop_hc();
|
|
usb_put_hcd(hcd);
|
|
clk_disable_unprepare(usb_host_clk);
|
|
isp1301_i2c_client = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:usb-ohci");
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ohci_hcd_nxp_match[] = {
|
|
{ .compatible = "nxp,ohci-nxp" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
|
|
#endif
|
|
|
|
static struct platform_driver ohci_hcd_nxp_driver = {
|
|
.driver = {
|
|
.name = "usb-ohci",
|
|
.of_match_table = of_match_ptr(ohci_hcd_nxp_match),
|
|
},
|
|
.probe = ohci_hcd_nxp_probe,
|
|
.remove = ohci_hcd_nxp_remove,
|
|
};
|
|
|
|
static int __init ohci_nxp_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
|
|
ohci_init_driver(&ohci_nxp_hc_driver, NULL);
|
|
return platform_driver_register(&ohci_hcd_nxp_driver);
|
|
}
|
|
module_init(ohci_nxp_init);
|
|
|
|
static void __exit ohci_nxp_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&ohci_hcd_nxp_driver);
|
|
}
|
|
module_exit(ohci_nxp_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL v2");
|