385 lines
9.1 KiB
C
Executable File
385 lines
9.1 KiB
C
Executable File
/*
|
|
* drivers/usb/host/ehci-orion.c
|
|
*
|
|
* Tzachi Perelstein <tzachi@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_data/usb-ehci-orion.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define rdl(off) readl_relaxed(hcd->regs + (off))
|
|
#define wrl(off, val) writel_relaxed((val), hcd->regs + (off))
|
|
|
|
#define USB_CMD 0x140
|
|
#define USB_CMD_RUN BIT(0)
|
|
#define USB_CMD_RESET BIT(1)
|
|
#define USB_MODE 0x1a8
|
|
#define USB_MODE_MASK GENMASK(1, 0)
|
|
#define USB_MODE_DEVICE 0x2
|
|
#define USB_MODE_HOST 0x3
|
|
#define USB_MODE_SDIS BIT(4)
|
|
#define USB_CAUSE 0x310
|
|
#define USB_MASK 0x314
|
|
#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
|
|
#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
|
|
#define USB_IPG 0x360
|
|
#define USB_PHY_PWR_CTRL 0x400
|
|
#define USB_PHY_TX_CTRL 0x420
|
|
#define USB_PHY_RX_CTRL 0x430
|
|
#define USB_PHY_IVREF_CTRL 0x440
|
|
#define USB_PHY_TST_GRP_CTRL 0x450
|
|
|
|
#define USB_SBUSCFG 0x90
|
|
|
|
/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
|
|
#define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6)
|
|
#define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3)
|
|
/* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */
|
|
#define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0)
|
|
|
|
#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \
|
|
| USB_SBUSCFG_BARD_ALIGN_128B \
|
|
| USB_SBUSCFG_AHBBRST_INCR16)
|
|
|
|
#define DRIVER_DESC "EHCI orion driver"
|
|
|
|
#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
|
|
|
|
struct orion_ehci_hcd {
|
|
struct clk *clk;
|
|
struct phy *phy;
|
|
};
|
|
|
|
static const char hcd_name[] = "ehci-orion";
|
|
|
|
static struct hc_driver __read_mostly ehci_orion_hc_driver;
|
|
|
|
/*
|
|
* Implement Orion USB controller specification guidelines
|
|
*/
|
|
static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
|
|
{
|
|
/* The below GLs are according to the Orion Errata document */
|
|
/*
|
|
* Clear interrupt cause and mask
|
|
*/
|
|
wrl(USB_CAUSE, 0);
|
|
wrl(USB_MASK, 0);
|
|
|
|
/*
|
|
* Reset controller
|
|
*/
|
|
wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
|
|
while (rdl(USB_CMD) & USB_CMD_RESET);
|
|
|
|
/*
|
|
* GL# USB-10: Set IPG for non start of frame packets
|
|
* Bits[14:8]=0xc
|
|
*/
|
|
wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
|
|
|
|
/*
|
|
* GL# USB-9: USB 2.0 Power Control
|
|
* BG_VSEL[7:6]=0x1
|
|
*/
|
|
wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
|
|
|
|
/*
|
|
* GL# USB-1: USB PHY Tx Control - force calibration to '8'
|
|
* TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
|
|
*/
|
|
wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY Rx Control
|
|
* RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
|
|
* CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
|
|
*/
|
|
wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY IVREF Control
|
|
* PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
|
|
*/
|
|
wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY Test Group Control
|
|
* REG_FIFO_SQ_RST[15]=0
|
|
*/
|
|
wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
|
|
|
|
/*
|
|
* Stop and reset controller
|
|
*/
|
|
wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
|
|
wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
|
|
while (rdl(USB_CMD) & USB_CMD_RESET);
|
|
|
|
/*
|
|
* GL# USB-5 Streaming disable REG_USB_MODE[4]=1
|
|
* TBD: This need to be done after each reset!
|
|
* GL# USB-4 Setup USB Host mode
|
|
*/
|
|
wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
|
|
}
|
|
|
|
static void
|
|
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
|
|
const struct mbus_dram_target_info *dram)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
wrl(USB_WINDOW_CTRL(i), 0);
|
|
wrl(USB_WINDOW_BASE(i), 0);
|
|
}
|
|
|
|
for (i = 0; i < dram->num_cs; i++) {
|
|
const struct mbus_dram_window *cs = dram->cs + i;
|
|
|
|
wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
|
|
(cs->mbus_attr << 8) |
|
|
(dram->mbus_dram_target_id << 4) | 1);
|
|
wrl(USB_WINDOW_BASE(i), cs->base);
|
|
}
|
|
}
|
|
|
|
static int ehci_orion_drv_reset(struct usb_hcd *hcd)
|
|
{
|
|
struct device *dev = hcd->self.controller;
|
|
int ret;
|
|
|
|
ret = ehci_setup(hcd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* For SoC without hlock, need to program sbuscfg value to guarantee
|
|
* AHB master's burst would not overrun or underrun FIFO.
|
|
*
|
|
* sbuscfg reg has to be set after usb controller reset, otherwise
|
|
* the value would be override to 0.
|
|
*/
|
|
if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
|
|
wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct ehci_driver_overrides orion_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct orion_ehci_hcd),
|
|
.reset = ehci_orion_drv_reset,
|
|
};
|
|
|
|
static int ehci_orion_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
|
|
const struct mbus_dram_target_info *dram;
|
|
struct resource *res;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
void __iomem *regs;
|
|
int irq, err;
|
|
enum orion_ehci_phy_ver phy_version;
|
|
struct orion_ehci_hcd *priv;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_debug("Initializing Orion-SoC USB Host Controller\n");
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no IRQ. Check %s setup!\n",
|
|
dev_name(&pdev->dev));
|
|
err = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Right now device-tree probed devices don't get dma_mask
|
|
* set. Since shared usb code relies on it, set it here for
|
|
* now. Once we have dma capability bindings this can go away.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
goto err;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(regs)) {
|
|
err = PTR_ERR(regs);
|
|
goto err;
|
|
}
|
|
|
|
hcd = usb_create_hcd(&ehci_orion_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
err = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
hcd->regs = regs;
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->caps = hcd->regs + 0x100;
|
|
hcd->has_tt = 1;
|
|
|
|
priv = hcd_to_orion_priv(hcd);
|
|
/*
|
|
* Not all platforms can gate the clock, so it is not an error if
|
|
* the clock does not exists.
|
|
*/
|
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (!IS_ERR(priv->clk))
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
|
|
if (IS_ERR(priv->phy)) {
|
|
err = PTR_ERR(priv->phy);
|
|
if (err != -ENOSYS)
|
|
goto err_phy_get;
|
|
} else {
|
|
err = phy_init(priv->phy);
|
|
if (err)
|
|
goto err_phy_init;
|
|
|
|
err = phy_power_on(priv->phy);
|
|
if (err)
|
|
goto err_phy_power_on;
|
|
}
|
|
|
|
/*
|
|
* (Re-)program MBUS remapping windows if we are asked to.
|
|
*/
|
|
dram = mv_mbus_dram_info();
|
|
if (dram)
|
|
ehci_orion_conf_mbus_windows(hcd, dram);
|
|
|
|
/*
|
|
* setup Orion USB controller.
|
|
*/
|
|
if (pdev->dev.of_node)
|
|
phy_version = EHCI_PHY_NA;
|
|
else
|
|
phy_version = pd->phy_version;
|
|
|
|
switch (phy_version) {
|
|
case EHCI_PHY_NA: /* dont change USB phy settings */
|
|
break;
|
|
case EHCI_PHY_ORION:
|
|
orion_usb_phy_v1_setup(hcd);
|
|
break;
|
|
case EHCI_PHY_DD:
|
|
case EHCI_PHY_KW:
|
|
default:
|
|
dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
|
|
}
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err)
|
|
goto err_add_hcd;
|
|
|
|
device_wakeup_enable(hcd->self.controller);
|
|
return 0;
|
|
|
|
err_add_hcd:
|
|
if (!IS_ERR(priv->phy))
|
|
phy_power_off(priv->phy);
|
|
err_phy_power_on:
|
|
if (!IS_ERR(priv->phy))
|
|
phy_exit(priv->phy);
|
|
err_phy_init:
|
|
err_phy_get:
|
|
if (!IS_ERR(priv->clk))
|
|
clk_disable_unprepare(priv->clk);
|
|
usb_put_hcd(hcd);
|
|
err:
|
|
dev_err(&pdev->dev, "init %s fail, %d\n",
|
|
dev_name(&pdev->dev), err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ehci_orion_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (!IS_ERR(priv->phy)) {
|
|
phy_power_off(priv->phy);
|
|
phy_exit(priv->phy);
|
|
}
|
|
|
|
if (!IS_ERR(priv->clk))
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ehci_orion_dt_ids[] = {
|
|
{ .compatible = "marvell,orion-ehci", },
|
|
{ .compatible = "marvell,armada-3700-ehci", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
|
|
|
|
static struct platform_driver ehci_orion_driver = {
|
|
.probe = ehci_orion_drv_probe,
|
|
.remove = ehci_orion_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "orion-ehci",
|
|
.of_match_table = ehci_orion_dt_ids,
|
|
},
|
|
};
|
|
|
|
static int __init ehci_orion_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
|
|
ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
|
|
return platform_driver_register(&ehci_orion_driver);
|
|
}
|
|
module_init(ehci_orion_init);
|
|
|
|
static void __exit ehci_orion_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&ehci_orion_driver);
|
|
}
|
|
module_exit(ehci_orion_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_ALIAS("platform:orion-ehci");
|
|
MODULE_AUTHOR("Tzachi Perelstein");
|
|
MODULE_LICENSE("GPL v2");
|