2595 lines
60 KiB
C
Executable File
2595 lines
60 KiB
C
Executable File
/* a96t3x6.c -- Linux driver for A96T3X6 chip as grip sensor
|
|
*
|
|
* Copyright (C) 2017 Samsung Electronics Co.Ltd
|
|
* Author: YunJae Hwang <yjz.hwang@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
#include <linux/wakelock.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sec_class.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#if defined(CONFIG_MUIC_NOTIFIER)
|
|
#include <linux/muic/muic.h>
|
|
#include <linux/muic/muic_notifier.h>
|
|
#endif
|
|
#if defined(CONFIG_CCIC_NOTIFIER)
|
|
#include <linux/usb/typec/pdic_notifier.h>
|
|
#endif
|
|
#if defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER)
|
|
#include <linux/usb/typec/usb_typec_manager_notifier.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
#include <linux/of_gpio.h>
|
|
#endif
|
|
|
|
#include "a96t3x6_wifi.h"
|
|
|
|
struct a96t3x6_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct delayed_work debug_work;
|
|
struct delayed_work firmware_work;
|
|
|
|
const struct firmware *firm_data_bin;
|
|
const u8 *firm_data_ums;
|
|
char phys[32];
|
|
long firm_size;
|
|
int irq;
|
|
struct wake_lock grip_wake_lock;
|
|
u16 grip_p_thd;
|
|
u16 grip_r_thd;
|
|
u16 grip_n_thd;
|
|
u16 grip_baseline;
|
|
u16 grip_raw;
|
|
u16 grip_raw_d;
|
|
u16 grip_event;
|
|
u16 diff;
|
|
u16 diff_d;
|
|
bool sar_mode;
|
|
bool current_state;
|
|
bool expect_state;
|
|
bool earjack;
|
|
int earjack_noise;
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
int irq_count;
|
|
int abnormal_mode;
|
|
s16 max_diff;
|
|
s16 max_normal_diff;
|
|
#endif
|
|
int irq_en_cnt;
|
|
u8 fw_update_state;
|
|
u8 fw_ver;
|
|
u8 md_ver;
|
|
u8 id_ver;
|
|
u8 fw_ver_bin;
|
|
u8 md_ver_bin;
|
|
u8 checksum_h;
|
|
u8 checksum_h_bin;
|
|
u8 checksum_l;
|
|
u8 checksum_l_bin;
|
|
bool enabled;
|
|
bool skip_event;
|
|
bool resume_called;
|
|
|
|
int ldo_en; /* ldo_en pin gpio */
|
|
int grip_int; /* irq pin gpio */
|
|
struct regulator *dvdd_vreg; /* regulator */
|
|
int (*power)(void *, bool on); /* power onoff function ptr */
|
|
const char *fw_path;
|
|
bool bringup;
|
|
bool probe_done;
|
|
int firmup_cmd;
|
|
int debug_count;
|
|
int firmware_count;
|
|
int identity_number;
|
|
bool crc_check;
|
|
#if defined(CONFIG_MUIC_NOTIFIER)
|
|
struct notifier_block cpuidle_muic_nb;
|
|
#endif
|
|
#if defined(CONFIG_CCIC_NOTIFIER)
|
|
struct notifier_block cpuidle_ccic_nb;
|
|
#endif
|
|
};
|
|
|
|
static void a96t3x6_reset(struct a96t3x6_data *data);
|
|
static void a96t3x6_diff_getdata(struct a96t3x6_data *data);
|
|
static void grip_always_active(struct a96t3x6_data *data, int on);
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
static int a96t3x6_fw_check(struct a96t3x6_data *data);
|
|
static void a96t3x6_set_firmware_work(struct a96t3x6_data *data, u8 enable,
|
|
unsigned int time_ms);
|
|
#endif
|
|
|
|
static int a96t3x6_i2c_read(struct i2c_client *client,
|
|
u8 reg, u8 *val, unsigned int len)
|
|
{
|
|
struct a96t3x6_data *data = i2c_get_clientdata(client);
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
int retry = 3;
|
|
|
|
mutex_lock(&data->lock);
|
|
msg.addr = client->addr;
|
|
msg.flags = I2C_M_WR;
|
|
msg.len = 1;
|
|
msg.buf = ®
|
|
while (retry--) {
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret >= 0)
|
|
break;
|
|
|
|
GRIP_ERR("fail(address set)(%d)(%d)\n", retry, ret);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
retry = 3;
|
|
msg.flags = 1;/*I2C_M_RD*/
|
|
msg.len = len;
|
|
msg.buf = val;
|
|
while (retry--) {
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret >= 0) {
|
|
mutex_unlock(&data->lock);
|
|
return 0;
|
|
}
|
|
GRIP_ERR("fail(data read)(%d)(%d)\n", retry, ret);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_i2c_read_data(struct i2c_client *client, u8 *val, unsigned int len)
|
|
{
|
|
struct a96t3x6_data *data = i2c_get_clientdata(client);
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
int retry = 3;
|
|
|
|
mutex_lock(&data->lock);
|
|
msg.addr = client->addr;
|
|
msg.flags = 1;/*I2C_M_RD*/
|
|
msg.len = len;
|
|
msg.buf = val;
|
|
while (retry--) {
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret >= 0) {
|
|
mutex_unlock(&data->lock);
|
|
return 0;
|
|
}
|
|
GRIP_ERR("fail(data read)(%d)\n", retry);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_i2c_write(struct i2c_client *client, u8 reg, u8 *val)
|
|
{
|
|
struct a96t3x6_data *data = i2c_get_clientdata(client);
|
|
struct i2c_msg msg[1];
|
|
unsigned char buf[2];
|
|
int ret;
|
|
int retry = 3;
|
|
|
|
mutex_lock(&data->lock);
|
|
buf[0] = reg;
|
|
buf[1] = *val;
|
|
msg->addr = client->addr;
|
|
msg->flags = I2C_M_WR;
|
|
msg->len = 2;
|
|
msg->buf = buf;
|
|
|
|
while (retry--) {
|
|
ret = i2c_transfer(client->adapter, msg, 1);
|
|
if (ret >= 0) {
|
|
mutex_unlock(&data->lock);
|
|
return 0;
|
|
}
|
|
GRIP_ERR("fail(%d)\n", retry);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static void a96t3x6_check_first_status(struct a96t3x6_data *data, int enable)
|
|
{
|
|
u8 r_buf[2];
|
|
u16 grip_thd;
|
|
|
|
if (data->skip_event == true) {
|
|
GRIP_INFO("skip event..\n");
|
|
return;
|
|
}
|
|
|
|
a96t3x6_i2c_read(data->client, REG_SAR_THRESHOLD, r_buf, 2);
|
|
grip_thd = (r_buf[0] << 8) | r_buf[1];
|
|
|
|
a96t3x6_diff_getdata(data);
|
|
|
|
if (grip_thd < data->diff) {
|
|
input_report_rel(data->input_dev, REL_MISC, 1);
|
|
} else {
|
|
input_report_rel(data->input_dev, REL_MISC, 2);
|
|
}
|
|
|
|
input_sync(data->input_dev);
|
|
}
|
|
|
|
/*
|
|
* @enable: turn it on or off.
|
|
* @force: if caller is grip_sensing_change(), it's true. others, it's false.
|
|
*
|
|
* This function was designed to prevent noise issue from ic for specific models.
|
|
* If earjack_noise is true, it handled enable control for it.
|
|
*/
|
|
static void a96t3x6_set_enable(struct a96t3x6_data *data, int enable, bool force)
|
|
{
|
|
u8 cmd;
|
|
int ret;
|
|
|
|
if ((data->current_state == enable) ||
|
|
((data->earjack_noise) && ((!force && data->earjack) ||
|
|
(force && ((!enable && (data->expect_state != data->current_state))
|
|
|| (enable && (data->expect_state == data->current_state))))))) {
|
|
GRIP_INFO("old = %d, new = %d, skip exception case\n",
|
|
data->current_state, enable);
|
|
return;
|
|
}
|
|
|
|
GRIP_INFO("old enable = %d, new enable = %d\n",
|
|
data->current_state, enable);
|
|
if (enable) {
|
|
cmd = CMD_ON;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_ENABLE, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("failed to enable grip irq\n");
|
|
|
|
a96t3x6_check_first_status(data, enable);
|
|
|
|
enable_irq(data->irq);
|
|
enable_irq_wake(data->irq);
|
|
data->irq_en_cnt++;
|
|
} else {
|
|
cmd = CMD_OFF;
|
|
disable_irq_wake(data->irq);
|
|
disable_irq(data->irq);
|
|
data->irq_en_cnt--;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_ENABLE, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("failed to disable grip irq\n");
|
|
}
|
|
data->current_state = enable;
|
|
}
|
|
|
|
static void a96t3x6_sar_only_mode(struct a96t3x6_data *data, int on)
|
|
{
|
|
int retry = 3;
|
|
int ret;
|
|
u8 cmd;
|
|
u8 r_buf;
|
|
int mode_retry = 5;
|
|
|
|
if (data->sar_mode == on) {
|
|
GRIP_INFO("skip already %s\n", (on == 1) ? "sar only mode" : "normal mode");
|
|
return;
|
|
}
|
|
|
|
if (on == 1)
|
|
cmd = CMD_ON;
|
|
else
|
|
cmd = CMD_OFF;
|
|
|
|
GRIP_INFO("%s, cmd=%x\n", (on == 1) ? "sar only mode" : "normal mode", cmd);
|
|
|
|
sar_mode:
|
|
while (retry > 0) {
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_MODE, &cmd);
|
|
if (ret < 0) {
|
|
GRIP_ERR("i2c read fail(%d), retry %d\n", ret, retry);
|
|
retry--;
|
|
usleep_range(20000, 20000);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
|
|
usleep_range(40000, 40000);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_MODE, &r_buf, 1);
|
|
if (ret < 0)
|
|
GRIP_ERR("i2c read fail(%d)\n", ret);
|
|
|
|
GRIP_INFO("read reg = %x\n", r_buf);
|
|
|
|
if ((r_buf != cmd) && (mode_retry > 0)) {
|
|
GRIP_INFO("change fail retry %d\n", 6 - mode_retry--);
|
|
|
|
if (mode_retry == 0)
|
|
a96t3x6_reset(data);
|
|
|
|
goto sar_mode;
|
|
}
|
|
|
|
if (r_buf == CMD_ON)
|
|
data->sar_mode = 1;
|
|
else
|
|
data->sar_mode = 0;
|
|
}
|
|
|
|
static void a96t3x6_sar_sensing(struct a96t3x6_data *data, int on)
|
|
{
|
|
u8 cmd;
|
|
int ret;
|
|
|
|
GRIP_INFO("%s", (on) ? "on" : "off");
|
|
|
|
if (on)
|
|
cmd = CMD_ON;
|
|
else
|
|
cmd = CMD_OFF;
|
|
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_SENSING, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("failed to %s grip sensing\n", (on) ? "enable" : "disable");
|
|
}
|
|
|
|
static void a96t3x6_reset_for_bootmode(struct a96t3x6_data *data)
|
|
{
|
|
GRIP_INFO("\n");
|
|
|
|
data->power(data, false);
|
|
usleep_range(50000, 50000);
|
|
data->power(data, true);
|
|
}
|
|
|
|
static void a96t3x6_reset(struct a96t3x6_data *data)
|
|
{
|
|
if (data->enabled == false)
|
|
return;
|
|
|
|
GRIP_INFO("start\n");
|
|
disable_irq_nosync(data->irq);
|
|
|
|
data->enabled = false;
|
|
|
|
a96t3x6_reset_for_bootmode(data);
|
|
usleep_range(RESET_DELAY, RESET_DELAY);
|
|
|
|
if (data->current_state)
|
|
a96t3x6_set_enable(data, 1, 0);
|
|
|
|
data->enabled = true;
|
|
|
|
GRIP_INFO("done\n");
|
|
}
|
|
|
|
static void a96t3x6_diff_getdata(struct a96t3x6_data *data)
|
|
{
|
|
int ret;
|
|
int retry = 3;
|
|
u8 r_buf[4] = {0,};
|
|
|
|
while (retry--) {
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_DIFFDATA, r_buf, 4);
|
|
if (ret == 0)
|
|
break;
|
|
GRIP_ERR("read failed(%d)\n", retry);
|
|
usleep_range(10000, 10000);
|
|
}
|
|
|
|
data->diff = (r_buf[0] << 8) | r_buf[1];
|
|
data->diff_d = (r_buf[2] << 8) | r_buf[3];
|
|
GRIP_INFO("%u\n", data->diff);
|
|
}
|
|
|
|
static void a96t3x6_check_diff_and_cap(struct a96t3x6_data *data)
|
|
{
|
|
u8 r_buf[2] = {0,0};
|
|
u8 cmd = 0x20;
|
|
int ret;
|
|
int value = 0;
|
|
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_TOTALCAP, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("write fail(%d)\n", ret);
|
|
|
|
usleep_range(20, 20);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_TOTALCAP_READ, r_buf, 2);
|
|
if (ret < 0)
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
|
|
value = (r_buf[0] << 8) | r_buf[1];
|
|
GRIP_INFO("Cap Read %d\n", value);
|
|
|
|
a96t3x6_diff_getdata(data);
|
|
}
|
|
|
|
static void a96t3x6_grip_sw_reset(struct a96t3x6_data *data)
|
|
{
|
|
int ret, retry = 3;
|
|
u8 cmd = CMD_SW_RESET;
|
|
|
|
GRIP_INFO("\n");
|
|
|
|
while (retry--) {
|
|
a96t3x6_check_diff_and_cap(data);
|
|
usleep_range(10000, 10000);
|
|
}
|
|
|
|
ret = a96t3x6_i2c_write(data->client, REG_SW_RESET, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
else
|
|
usleep_range(35000, 35000);
|
|
}
|
|
|
|
static int a96t3x6_get_hallic_state(struct a96t3x6_data *data)
|
|
{
|
|
char hall_buf[6];
|
|
int ret = -ENODEV;
|
|
int hall_state = -1;
|
|
mm_segment_t old_fs;
|
|
struct file *filep;
|
|
|
|
memset(hall_buf, 0, sizeof(hall_buf));
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
|
|
filep = filp_open(HALL_PATH, O_RDONLY, 0666);
|
|
if (IS_ERR(filep)) {
|
|
set_fs(old_fs);
|
|
return hall_state;
|
|
}
|
|
|
|
ret = filep->f_op->read(filep, hall_buf,
|
|
sizeof(hall_buf) - 1, &filep->f_pos);
|
|
if (ret != sizeof(hall_buf) - 1)
|
|
goto exit;
|
|
|
|
if (strcmp(hall_buf, "CLOSE") == 0)
|
|
hall_state = HALL_CLOSE_STATE;
|
|
|
|
exit:
|
|
filp_close(filep, current->files);
|
|
set_fs(old_fs);
|
|
|
|
return hall_state;
|
|
}
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
static void a96t3x6_firmware_work_func(struct work_struct *work)
|
|
{
|
|
struct a96t3x6_data *data = container_of((struct delayed_work *)work,
|
|
struct a96t3x6_data, firmware_work);
|
|
|
|
int ret;
|
|
|
|
GRIP_INFO("called\n");
|
|
|
|
ret = a96t3x6_fw_check(data);
|
|
if (ret) {
|
|
if (data->firmware_count++ < FIRMWARE_VENDOR_CALL_CNT) {
|
|
GRIP_ERR("failed to load firmware (%d)\n",
|
|
data->firmware_count);
|
|
schedule_delayed_work(&data->firmware_work,
|
|
msecs_to_jiffies(1000));
|
|
return;
|
|
}
|
|
GRIP_ERR("final retry failed\n");
|
|
} else {
|
|
GRIP_INFO("fw check success\n");
|
|
}
|
|
}
|
|
#endif
|
|
static void a96t3x6_debug_work_func(struct work_struct *work)
|
|
{
|
|
struct a96t3x6_data *data = container_of((struct delayed_work *)work,
|
|
struct a96t3x6_data, debug_work);
|
|
|
|
static int hall_prev_state;
|
|
int hall_state;
|
|
|
|
if (data->resume_called == true) {
|
|
data->resume_called = false;
|
|
a96t3x6_sar_only_mode(data, 0);
|
|
schedule_delayed_work(&data->debug_work, msecs_to_jiffies(1000));
|
|
return;
|
|
}
|
|
hall_state = a96t3x6_get_hallic_state(data);
|
|
if (hall_state == HALL_CLOSE_STATE && hall_prev_state != hall_state) {
|
|
GRIP_INFO("hall is closed\n");
|
|
a96t3x6_grip_sw_reset(data);
|
|
}
|
|
hall_prev_state = hall_state;
|
|
|
|
if (data->current_state) {
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
if (data->abnormal_mode) {
|
|
a96t3x6_diff_getdata(data);
|
|
if (data->max_normal_diff < data->diff)
|
|
data->max_normal_diff = data->diff;
|
|
} else {
|
|
#endif
|
|
if (data->debug_count >= GRIP_LOG_TIME) {
|
|
a96t3x6_diff_getdata(data);
|
|
data->debug_count = 0;
|
|
} else {
|
|
data->debug_count++;
|
|
}
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
}
|
|
#endif
|
|
}
|
|
|
|
schedule_delayed_work(&data->debug_work, msecs_to_jiffies(2000));
|
|
}
|
|
|
|
static void a96t3x6_set_debug_work(struct a96t3x6_data *data, u8 enable,
|
|
unsigned int time_ms)
|
|
{
|
|
GRIP_INFO("\n");
|
|
|
|
if (enable == 1) {
|
|
data->debug_count = 0;
|
|
schedule_delayed_work(&data->debug_work,
|
|
msecs_to_jiffies(time_ms));
|
|
} else {
|
|
cancel_delayed_work_sync(&data->debug_work);
|
|
}
|
|
}
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
static void a96t3x6_set_firmware_work(struct a96t3x6_data *data, u8 enable,
|
|
unsigned int time_ms)
|
|
{
|
|
GRIP_INFO("%s %s\n", __func__, enable ? "enabled": "disabled");
|
|
|
|
if (enable == 1) {
|
|
data->firmware_count = 0;
|
|
schedule_delayed_work(&data->firmware_work,
|
|
msecs_to_jiffies(time_ms));
|
|
} else {
|
|
cancel_delayed_work_sync(&data->firmware_work);
|
|
}
|
|
}
|
|
#endif
|
|
static irqreturn_t a96t3x6_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct a96t3x6_data *data = dev_id;
|
|
struct i2c_client *client = data->client;
|
|
int ret, retry;
|
|
u8 buf;
|
|
int grip_data;
|
|
u8 grip_press = 0;
|
|
|
|
wake_lock(&data->grip_wake_lock);
|
|
|
|
ret = a96t3x6_i2c_read(client, REG_BTNSTATUS, &buf, 1);
|
|
if (ret < 0) {
|
|
retry = 3;
|
|
while (retry--) {
|
|
GRIP_ERR("read fail(%d)\n", retry);
|
|
ret = a96t3x6_i2c_read(client, REG_BTNSTATUS, &buf, 1);
|
|
if (ret == 0)
|
|
break;
|
|
usleep_range(10000, 11000);
|
|
}
|
|
if (retry < 0) {
|
|
a96t3x6_reset(data);
|
|
wake_unlock(&data->grip_wake_lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
GRIP_INFO("buf = 0x%02x\n", buf);
|
|
|
|
grip_data = (buf >> 4) & 0x03;
|
|
grip_press = !(grip_data % 2);
|
|
|
|
if (grip_data) {
|
|
if (data->skip_event) {
|
|
GRIP_INFO("int was generated, but event skipped\n");
|
|
} else {
|
|
if (grip_press)
|
|
input_report_rel(data->input_dev, REL_MISC, 1);
|
|
else
|
|
input_report_rel(data->input_dev, REL_MISC, 2);
|
|
input_sync(data->input_dev);
|
|
data->grip_event = grip_press;
|
|
}
|
|
}
|
|
a96t3x6_diff_getdata(data);
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
if (data->abnormal_mode) {
|
|
if (data->grip_event) {
|
|
if (data->max_diff < data->diff)
|
|
data->max_diff = data->diff;
|
|
data->irq_count++;
|
|
}
|
|
}
|
|
#endif
|
|
if (grip_data)
|
|
GRIP_INFO("%s %x\n", grip_press ? "grip P" : "grip R", buf);
|
|
|
|
wake_unlock(&data->grip_wake_lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int a96t3x6_get_raw_data(struct a96t3x6_data *data)
|
|
{
|
|
int ret;
|
|
u8 r_buf[4] = {0,};
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_RAWDATA, r_buf, 4);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_raw = 0;
|
|
data->grip_raw_d = 0;
|
|
return ret;
|
|
}
|
|
|
|
data->grip_raw = (r_buf[0] << 8) | r_buf[1];
|
|
data->grip_raw_d = (r_buf[2] << 8) | r_buf[3];
|
|
|
|
GRIP_INFO("grip_raw = %d\n", data->grip_raw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t grip_sar_enable_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", !data->skip_event);
|
|
}
|
|
|
|
static ssize_t grip_sar_enable_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret, enable;
|
|
|
|
ret = sscanf(buf, "%2d", &enable);
|
|
if (ret != 1) {
|
|
GRIP_ERR(" cmd read err\n");
|
|
return count;
|
|
}
|
|
|
|
if (!(enable >= 0 && enable <= 3)) {
|
|
GRIP_ERR(" wrong command(%d)\n", enable);
|
|
return count;
|
|
}
|
|
|
|
GRIP_INFO(" enable = %d\n", enable);
|
|
|
|
/* enable 0:off, 1:on, 2:skip event , 3:cancel skip event */
|
|
if (enable == 2) {
|
|
data->skip_event = true;
|
|
input_report_rel(data->input_dev, REL_MISC, 2);
|
|
input_sync(data->input_dev);
|
|
} else if (enable == 3) {
|
|
data->skip_event = false;
|
|
} else {
|
|
data->expect_state = enable;
|
|
a96t3x6_set_enable(data, enable, 0);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_threshold_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
u8 r_buf[4];
|
|
int ret;
|
|
|
|
#ifdef CONFIG_SENSORS_A96T3X6_WIFI_2CH
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_THRESHOLD, r_buf, 2);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_p_thd = 0;
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", 0);
|
|
}
|
|
data->grip_p_thd = (r_buf[0] << 8) | r_buf[1];
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_RELEASE_THRESHOLD, r_buf, 2);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_r_thd = 0;
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", 0);
|
|
}
|
|
data->grip_r_thd = (r_buf[0] << 8) | r_buf[1];
|
|
#else
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_THRESHOLD, r_buf, 4);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_p_thd = 0;
|
|
data->grip_r_thd = 0;
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", 0);
|
|
}
|
|
data->grip_p_thd = (r_buf[0] << 8) | r_buf[1];
|
|
data->grip_r_thd = (r_buf[2] << 8) | r_buf[3];
|
|
#endif
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_NOISE_THRESHOLD, r_buf, 2);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_n_thd = 0;
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", 0);
|
|
}
|
|
data->grip_n_thd = (r_buf[0] << 8) | r_buf[1];
|
|
|
|
return sprintf(buf, "%u,%u,%u\n", data->grip_p_thd, data->grip_r_thd, data->grip_n_thd);
|
|
}
|
|
static ssize_t grip_total_cap_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
u8 r_buf[2];
|
|
u8 cmd;
|
|
int ret;
|
|
int value;
|
|
|
|
cmd = 0x20;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_TOTALCAP, &cmd);
|
|
if (ret < 0)
|
|
GRIP_ERR("write fail(%d)\n", ret);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_TOTALCAP_READ, r_buf, 2);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", 0);
|
|
}
|
|
value = (r_buf[0] << 8) | r_buf[1];
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", value / 100);
|
|
}
|
|
|
|
static ssize_t grip_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
int retry = 3;
|
|
u8 r_buf[4] = {0,};
|
|
|
|
while (retry--) {
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_DIFFDATA, r_buf, 4);
|
|
if (ret == 0)
|
|
break;
|
|
GRIP_ERR("read failed(%d)\n", retry);
|
|
usleep_range(10000, 10000);
|
|
}
|
|
|
|
data->diff = (r_buf[0] << 8) | r_buf[1];
|
|
data->diff_d = (r_buf[2] << 8) | r_buf[3];
|
|
|
|
return sprintf(buf, "%u,%u\n", data->diff, data->diff_d);
|
|
}
|
|
|
|
static ssize_t grip_baseline_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
u8 r_buf[2];
|
|
int ret;
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_BASELINE, r_buf, 2);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
data->grip_baseline = 0;
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", 0);
|
|
}
|
|
data->grip_baseline = (r_buf[0] << 8) | r_buf[1];
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", data->grip_baseline);
|
|
}
|
|
|
|
static ssize_t grip_raw_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = a96t3x6_get_raw_data(data);
|
|
if (ret < 0)
|
|
return sprintf(buf, "%d\n", 0);
|
|
else
|
|
return sprintf(buf, "%u,%u\n", data->grip_raw,
|
|
data->grip_raw_d);
|
|
}
|
|
|
|
static ssize_t grip_gain_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%d,%d,%d,%d\n", 0, 0, 0, 0);
|
|
}
|
|
|
|
static ssize_t grip_check_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
a96t3x6_diff_getdata(data);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", data->grip_event);
|
|
}
|
|
|
|
static ssize_t grip_sw_reset_ready_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
int retry = 10;
|
|
u8 r_buf[1] = {0};
|
|
|
|
GRIP_INFO("Wait start\n");
|
|
|
|
/* To garuantee grip sensor sw reset delay*/
|
|
msleep(500);
|
|
|
|
while (retry--) {
|
|
ret = a96t3x6_i2c_read(data->client, REG_SW_RESET, r_buf, 1);
|
|
if (r_buf[0] == 0x20)
|
|
break;
|
|
if (ret < 0)
|
|
GRIP_ERR("failed(%d)\n", retry);
|
|
msleep(100);
|
|
}
|
|
|
|
if(r_buf[0] == 0x20) {
|
|
GRIP_INFO("reset done");
|
|
a96t3x6_check_diff_and_cap(data);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "1\n");
|
|
} else {
|
|
GRIP_INFO("expect 0x20 read 0x%x\n", r_buf[0]);
|
|
return snprintf(buf, PAGE_SIZE, "0\n");
|
|
}
|
|
}
|
|
|
|
static ssize_t grip_sw_reset(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
u8 cmd;
|
|
int ret;
|
|
|
|
ret = kstrtou8(buf, 2, &cmd);
|
|
if (ret) {
|
|
GRIP_ERR("cmd read err\n");
|
|
return count;
|
|
}
|
|
|
|
if (!(cmd == 1)) {
|
|
GRIP_ERR("wrong command(%d)\n", cmd);
|
|
return count;
|
|
}
|
|
|
|
data->grip_event = 0;
|
|
|
|
GRIP_INFO("cmd(%d)\n", cmd);
|
|
|
|
a96t3x6_grip_sw_reset(data);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_sensing_change(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret, earjack;
|
|
|
|
ret = sscanf(buf, "%2d", &earjack);
|
|
if (ret != 1) {
|
|
GRIP_ERR("cmd read err\n");
|
|
return count;
|
|
}
|
|
|
|
if (!(earjack == 0 || earjack == 1)) {
|
|
GRIP_ERR("wrong command(%d)\n", earjack);
|
|
return count;
|
|
}
|
|
|
|
if (!data->earjack_noise) {
|
|
if (earjack == 1)
|
|
a96t3x6_sar_only_mode(data, 1);
|
|
else
|
|
a96t3x6_sar_only_mode(data, 0);
|
|
} else {
|
|
if (earjack == 1) {
|
|
a96t3x6_set_enable(data, 0, 1);
|
|
a96t3x6_sar_sensing(data, 0);
|
|
data->grip_event = 0;
|
|
input_report_rel(data->input_dev, REL_MISC, 2);
|
|
input_sync(data->input_dev);
|
|
} else {
|
|
a96t3x6_grip_sw_reset(data);
|
|
a96t3x6_sar_sensing(data, 1);
|
|
a96t3x6_set_enable(data, 1, 1);
|
|
}
|
|
}
|
|
|
|
data->earjack = earjack;
|
|
|
|
GRIP_INFO("earjack was %s\n", (earjack) ? "inserted" : "removed");
|
|
|
|
return count;
|
|
}
|
|
|
|
#ifndef CONFIG_SAMSUNG_PRODUCT_SHIP
|
|
static ssize_t grip_sar_press_threshold_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
int ret;
|
|
int threshold;
|
|
u8 cmd[2];
|
|
|
|
ret = sscanf(buf, "%11d", &threshold);
|
|
if (ret != 1) {
|
|
GRIP_ERR("failed to read thresold, buf is %s\n", buf);
|
|
return count;
|
|
}
|
|
|
|
if (threshold > 0xff) {
|
|
cmd[0] = (threshold >> 8) & 0xff;
|
|
cmd[1] = 0xff & threshold;
|
|
} else if (threshold < 0) {
|
|
cmd[0] = 0x0;
|
|
cmd[1] = 0x0;
|
|
} else {
|
|
cmd[0] = 0x0;
|
|
cmd[1] = (u8)threshold;
|
|
}
|
|
|
|
GRIP_INFO("buf : %d, threshold : %d\n", threshold,
|
|
(cmd[0] << 8) | cmd[1]);
|
|
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_THRESHOLD, &cmd[0]);
|
|
if (ret != 0) {
|
|
GRIP_INFO("failed to write press_threhold data1");
|
|
goto press_threshold_out;
|
|
}
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_THRESHOLD + 0x01, &cmd[1]);
|
|
if (ret != 0) {
|
|
GRIP_INFO("failed to write press_threhold data2");
|
|
goto press_threshold_out;
|
|
}
|
|
press_threshold_out:
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_sar_release_threshold_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
int ret;
|
|
int threshold;
|
|
u8 cmd[2];
|
|
|
|
ret = sscanf(buf, "%11d", &threshold);
|
|
if (ret != 1) {
|
|
GRIP_ERR("failed to read thresold, buf is %s\n", buf);
|
|
return count;
|
|
}
|
|
|
|
if (threshold > 0xff) {
|
|
cmd[0] = (threshold >> 8) & 0xff;
|
|
cmd[1] = 0xff & threshold;
|
|
} else if (threshold < 0) {
|
|
cmd[0] = 0x0;
|
|
cmd[1] = 0x0;
|
|
} else {
|
|
cmd[0] = 0x0;
|
|
cmd[1] = (u8)threshold;
|
|
}
|
|
|
|
GRIP_INFO("buf : %d, threshold : %d\n", threshold,
|
|
(cmd[0] << 8) | cmd[1]);
|
|
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_THRESHOLD + 0x02,
|
|
&cmd[0]);
|
|
GRIP_INFO("ret : %d\n", ret);
|
|
|
|
if (ret != 0) {
|
|
GRIP_INFO("failed to write release_threshold_data1");
|
|
goto release_threshold_out;
|
|
}
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_THRESHOLD + 0x03,
|
|
&cmd[1]);
|
|
GRIP_INFO("ret : %d\n", ret);
|
|
if (ret != 0) {
|
|
GRIP_INFO("failed to write release_threshold_data2");
|
|
goto release_threshold_out;
|
|
}
|
|
release_threshold_out:
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_mode_change(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret, mode;
|
|
|
|
ret = sscanf(buf, "%2d", &mode);
|
|
if (ret != 1) {
|
|
GRIP_ERR("cmd read err\n");
|
|
return count;
|
|
}
|
|
|
|
if (!(mode == 0 || mode == 1)) {
|
|
GRIP_ERR("wrong command(%d)\n", mode);
|
|
return count;
|
|
}
|
|
|
|
GRIP_INFO("mode(%d)\n", mode);
|
|
|
|
a96t3x6_sar_only_mode(data, mode);
|
|
|
|
return count;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
static ssize_t a96t3x6_irq_count_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int result = 0;
|
|
s16 max_diff_val = 0;
|
|
|
|
if (data->irq_count) {
|
|
result = -1;
|
|
max_diff_val = data->max_diff;
|
|
} else {
|
|
max_diff_val = data->max_normal_diff;
|
|
}
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d,%d,%d\n", result,
|
|
data->irq_count, max_diff_val);
|
|
}
|
|
|
|
static ssize_t a96t3x6_irq_count_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
u8 onoff;
|
|
int ret;
|
|
|
|
ret = kstrtou8(buf, 10, &onoff);
|
|
if (ret < 0) {
|
|
GRIP_ERR("kstrtou8 failed.(%d)\n", ret);
|
|
return count;
|
|
}
|
|
|
|
mutex_lock(&data->lock);
|
|
if (onoff == 0) {
|
|
data->abnormal_mode = 0;
|
|
} else if (onoff == 1) {
|
|
data->abnormal_mode = 1;
|
|
data->irq_count = 0;
|
|
data->max_diff = 0;
|
|
data->max_normal_diff = 0;
|
|
} else {
|
|
GRIP_ERR("Invalid value.(%d)\n", onoff);
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
|
|
GRIP_INFO("result : %d\n", onoff);
|
|
return count;
|
|
}
|
|
#endif
|
|
|
|
static ssize_t grip_vendor_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return snprintf(buf, PAGE_SIZE, "%s\n", VENDOR_NAME);
|
|
}
|
|
static ssize_t grip_name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return snprintf(buf, PAGE_SIZE, "%s\n", MODEL_NAME);
|
|
}
|
|
|
|
static ssize_t bin_fw_ver(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "0x%02x%02x\n", data->md_ver_bin, data->fw_ver_bin);
|
|
}
|
|
|
|
static int a96t3x6_get_fw_version(struct a96t3x6_data *data, bool bootmode)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
u8 buf;
|
|
int ret;
|
|
int retry = 3;
|
|
|
|
grip_always_active(data, 1);
|
|
|
|
ret = a96t3x6_i2c_read(client, REG_FW_VER, &buf, 1);
|
|
if (ret < 0) {
|
|
while (retry--) {
|
|
GRIP_ERR("read fail(%d)\n", retry);
|
|
if (!bootmode)
|
|
a96t3x6_reset(data);
|
|
else
|
|
goto err_grip_revert_mode;
|
|
ret = a96t3x6_i2c_read(client, REG_FW_VER, &buf, 1);
|
|
if (ret == 0)
|
|
break;
|
|
}
|
|
if (retry <= 0)
|
|
goto err_grip_revert_mode;
|
|
}
|
|
data->fw_ver = buf;
|
|
|
|
retry = 3;
|
|
ret = a96t3x6_i2c_read(client, REG_MODEL_NO, &buf, 1);
|
|
if (ret < 0) {
|
|
while (retry--) {
|
|
GRIP_ERR("read fail(%d)\n", retry);
|
|
if (!bootmode)
|
|
a96t3x6_reset(data);
|
|
else
|
|
goto err_grip_revert_mode;
|
|
ret = a96t3x6_i2c_read(client, REG_MODEL_NO, &buf, 1);
|
|
if (ret == 0)
|
|
break;
|
|
}
|
|
if (retry <= 0)
|
|
goto err_grip_revert_mode;
|
|
}
|
|
data->md_ver = buf;
|
|
|
|
if (data->identity_number) {
|
|
retry = 3;
|
|
ret = a96t3x6_i2c_read(client, REG_ID_NO, &buf, 1);
|
|
if (ret < 0) {
|
|
while (retry--) {
|
|
GRIP_ERR("read fail(%d)\n", retry);
|
|
if (!bootmode)
|
|
a96t3x6_reset(data);
|
|
else
|
|
goto err_grip_revert_mode;
|
|
ret = a96t3x6_i2c_read(client, REG_ID_NO, &buf, 1);
|
|
if (ret == 0)
|
|
break;
|
|
}
|
|
if (retry <= 0)
|
|
goto err_grip_revert_mode;
|
|
}
|
|
data->id_ver = buf;
|
|
|
|
GRIP_INFO(" fw = 0x%x, md = 0x%x, id = 0x%x\n", data->fw_ver, data->md_ver, data->id_ver);
|
|
} else
|
|
GRIP_INFO(" fw = 0x%x, md = 0x%x\n", data->fw_ver, data->md_ver);
|
|
|
|
grip_always_active(data, 0);
|
|
|
|
return 0;
|
|
|
|
err_grip_revert_mode:
|
|
grip_always_active(data, 0);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static ssize_t read_fw_ver(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = a96t3x6_get_fw_version(data, false);
|
|
if (ret < 0) {
|
|
GRIP_ERR("read fail\n");
|
|
data->fw_ver = 0;
|
|
}
|
|
|
|
if (data->identity_number)
|
|
return snprintf(buf, PAGE_SIZE, "0x%02x%02x\n", data->id_ver, data->fw_ver);
|
|
else
|
|
return snprintf(buf, PAGE_SIZE, "0x%02x%02x\n", data->md_ver, data->fw_ver);
|
|
}
|
|
|
|
static int a96t3x6_load_fw_kernel(struct a96t3x6_data *data)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = request_firmware(&data->firm_data_bin,
|
|
data->fw_path, &data->client->dev);
|
|
if (ret) {
|
|
GRIP_ERR("request_firmware fail.\n");
|
|
return ret;
|
|
}
|
|
data->firm_size = data->firm_data_bin->size;
|
|
data->fw_ver_bin = data->firm_data_bin->data[5];
|
|
data->md_ver_bin = data->firm_data_bin->data[1];
|
|
GRIP_INFO("fw = 0x%x, md = 0x%x\n", data->fw_ver_bin, data->md_ver_bin);
|
|
|
|
data->checksum_h_bin = data->firm_data_bin->data[8];
|
|
data->checksum_l_bin = data->firm_data_bin->data[9];
|
|
|
|
GRIP_INFO("crc 0x%x 0x%x\n", data->checksum_h_bin, data->checksum_l_bin);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_load_fw(struct a96t3x6_data *data, u8 cmd)
|
|
{
|
|
struct file *fp;
|
|
mm_segment_t old_fs;
|
|
long fsize, nread;
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case BUILT_IN:
|
|
break;
|
|
|
|
case SDCARD:
|
|
old_fs = get_fs();
|
|
set_fs(get_ds());
|
|
fp = filp_open(TK_FW_PATH_SDCARD, O_RDONLY, 0400);
|
|
if (IS_ERR(fp)) {
|
|
GRIP_ERR("%s open error (%d)\n", TK_FW_PATH_SDCARD, (int)PTR_ERR(fp));
|
|
ret = -ENOENT;
|
|
goto fail_sdcard_open;
|
|
}
|
|
|
|
fsize = fp->f_path.dentry->d_inode->i_size;
|
|
data->firm_data_ums = kzalloc((size_t)fsize, GFP_KERNEL);
|
|
if (!data->firm_data_ums) {
|
|
GRIP_ERR("fail to kzalloc for fw\n");
|
|
ret = -ENOMEM;
|
|
goto fail_sdcard_kzalloc;
|
|
}
|
|
|
|
nread = vfs_read(fp,
|
|
(char __user *)data->firm_data_ums, fsize, &fp->f_pos);
|
|
if (nread != fsize) {
|
|
GRIP_ERR("fail to vfs_read file\n");
|
|
ret = -EINVAL;
|
|
goto fail_sdcard_size;
|
|
}
|
|
filp_close(fp, current->files);
|
|
set_fs(old_fs);
|
|
data->firm_size = nread;
|
|
break;
|
|
|
|
default:
|
|
ret = -1;
|
|
break;
|
|
}
|
|
GRIP_INFO("fw_size : %lu, success\n", data->firm_size);
|
|
return ret;
|
|
|
|
fail_sdcard_size:
|
|
kfree(&data->firm_data_ums);
|
|
fail_sdcard_kzalloc:
|
|
filp_close(fp, current->files);
|
|
fail_sdcard_open:
|
|
set_fs(old_fs);
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_check_busy(struct a96t3x6_data *data)
|
|
{
|
|
int ret, count = 0;
|
|
unsigned char val = 0x00;
|
|
|
|
do {
|
|
ret = i2c_master_recv(data->client, &val, sizeof(val));
|
|
|
|
if (val)
|
|
count++;
|
|
else
|
|
break;
|
|
|
|
if (count > 1000)
|
|
break;
|
|
} while (1);
|
|
|
|
if (count > 1000)
|
|
GRIP_ERR("busy %d\n", count);
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_i2c_read_checksum(struct a96t3x6_data *data)
|
|
{
|
|
unsigned char buf[6] = {0xAC, 0x9E, 0x10, 0x00, 0x3F, 0xFF};
|
|
unsigned char buf2[1] = {0x00};
|
|
unsigned char checksum[6] = {0, };
|
|
int ret;
|
|
|
|
i2c_master_send(data->client, buf, 6);
|
|
usleep_range(5000, 6000);
|
|
|
|
i2c_master_send(data->client, buf2, 1);
|
|
usleep_range(5000, 6000);
|
|
|
|
ret = a96t3x6_i2c_read_data(data->client, checksum, 6);
|
|
|
|
GRIP_INFO("ret:%d [%X][%X][%X][%X][%X]\n", ret,
|
|
checksum[0], checksum[1], checksum[2], checksum[4], checksum[5]);
|
|
data->checksum_h = checksum[4];
|
|
data->checksum_l = checksum[5];
|
|
return 0;
|
|
}
|
|
#ifdef CONFIG_SENSORS_A96T3X6_CRC_CHECK
|
|
static int a96t3x6_crc_check(struct a96t3x6_data *data)
|
|
{
|
|
unsigned char cmd = 0xAA;
|
|
unsigned char val = 0xFF;
|
|
unsigned char retry = 2;
|
|
int ret;
|
|
|
|
/*
|
|
* abov grip fw uses active/deactive mode in each period
|
|
* To check crc check, make the mode as always active mode.
|
|
*/
|
|
|
|
grip_always_active(data, 1);
|
|
|
|
/* crc check */
|
|
ret = a96t3x6_i2c_write(data->client, REG_FW_VER, &cmd);
|
|
if (ret < 0) {
|
|
GRIP_INFO("crc checking enter failed\n");
|
|
grip_always_active(data, 0);
|
|
return ret;
|
|
}
|
|
|
|
data->crc_check = CRC_FAIL;
|
|
|
|
while (retry--) {
|
|
msleep(400);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_FW_VER, &val, 1);
|
|
if (ret < 0) {
|
|
GRIP_INFO("crc read failed\n");
|
|
continue;
|
|
}
|
|
|
|
ret = (int)val;
|
|
if (val == 0x00) {
|
|
GRIP_INFO("crc check fail 0x%2x\n", val);
|
|
} else {
|
|
/* only success route */
|
|
data->crc_check = CRC_PASS;
|
|
GRIP_INFO("crc check normal 0x%2x\n", val);
|
|
break;
|
|
}
|
|
}
|
|
|
|
grip_always_active(data, 0);
|
|
return ret;
|
|
}
|
|
#endif
|
|
static int a96t3x6_fw_write(struct a96t3x6_data *data, unsigned char *addrH,
|
|
unsigned char *addrL, unsigned char *val)
|
|
{
|
|
int length = 36, ret = 0;
|
|
unsigned char buf[36];
|
|
|
|
buf[0] = 0xAC;
|
|
buf[1] = 0x7A;
|
|
memcpy(&buf[2], addrH, 1);
|
|
memcpy(&buf[3], addrL, 1);
|
|
memcpy(&buf[4], val, 32);
|
|
|
|
ret = i2c_master_send(data->client, buf, length);
|
|
if (ret != length) {
|
|
GRIP_ERR("write fail[%x%x], %d\n", *addrH, *addrL, ret);
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(3000, 3000);
|
|
|
|
a96t3x6_check_busy(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a96t3x6_fw_mode_enter(struct a96t3x6_data *data)
|
|
{
|
|
unsigned char buf[2] = {0xAC, 0x5B};
|
|
u8 cmd = 0;
|
|
int ret = 0;
|
|
|
|
GRIP_INFO("cmd send\n");
|
|
ret = i2c_master_send(data->client, buf, 2);
|
|
if (ret != 2) {
|
|
GRIP_ERR("write fail\n");
|
|
return -1;
|
|
}
|
|
|
|
ret = i2c_master_recv(data->client, &cmd, 1);
|
|
GRIP_INFO("cmd receive %2x, %2x\n", data->firmup_cmd, cmd);
|
|
if (data->firmup_cmd != cmd) {
|
|
GRIP_ERR("cmd not matched, firmup fail (ret = %d)\n", ret);
|
|
return -2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a96t3x6_flash_erase(struct a96t3x6_data *data)
|
|
{
|
|
unsigned char buf[2] = {0xAC, 0x2D};
|
|
int ret = 0;
|
|
|
|
ret = i2c_master_send(data->client, buf, 2);
|
|
if (ret != 2) {
|
|
GRIP_ERR("write fail\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int a96t3x6_fw_mode_exit(struct a96t3x6_data *data)
|
|
{
|
|
unsigned char buf[2] = {0xAC, 0xE1};
|
|
int ret = 0;
|
|
|
|
ret = i2c_master_send(data->client, buf, 2);
|
|
if (ret != 2) {
|
|
GRIP_ERR("write fail\n");
|
|
return -1;
|
|
}
|
|
|
|
usleep_range(RESET_DELAY, RESET_DELAY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a96t3x6_fw_update(struct a96t3x6_data *data, u8 cmd)
|
|
{
|
|
int ret, i = 0;
|
|
int count;
|
|
int retry = 5;
|
|
unsigned short address;
|
|
unsigned char addrH, addrL;
|
|
unsigned char buf[32] = {0, };
|
|
|
|
GRIP_INFO("start\n");
|
|
|
|
count = data->firm_size / 32;
|
|
address = 0x800;
|
|
|
|
while(retry > 0) {
|
|
a96t3x6_reset_for_bootmode(data);
|
|
usleep_range(BOOT_DELAY, BOOT_DELAY);
|
|
|
|
ret = a96t3x6_fw_mode_enter(data);
|
|
if (ret < 0)
|
|
GRIP_ERR("a96t3x6_fw_mode_enter fail, retry : %d\n", i);
|
|
else
|
|
break;
|
|
|
|
retry--;
|
|
}
|
|
|
|
if(ret < 0 && retry == 0) {
|
|
GRIP_ERR("a96t3x6_fw_mode_enter fail\n");
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(5000, 5000);
|
|
GRIP_INFO("fw_mode_cmd sent\n");
|
|
|
|
ret = a96t3x6_flash_erase(data);
|
|
usleep_range(FLASH_DELAY, FLASH_DELAY);
|
|
|
|
GRIP_INFO("fw_write start\n");
|
|
for (i = 1; i < count; i++) {
|
|
/* first 32byte is header */
|
|
addrH = (unsigned char)((address >> 8) & 0xFF);
|
|
addrL = (unsigned char)(address & 0xFF);
|
|
if (cmd == BUILT_IN)
|
|
memcpy(buf, &data->firm_data_bin->data[i * 32], 32);
|
|
else if (cmd == SDCARD)
|
|
memcpy(buf, &data->firm_data_ums[i * 32], 32);
|
|
|
|
ret = a96t3x6_fw_write(data, &addrH, &addrL, buf);
|
|
if (ret < 0) {
|
|
GRIP_ERR("err, no device : %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
address += 0x20;
|
|
|
|
memset(buf, 0, 32);
|
|
}
|
|
|
|
ret = a96t3x6_i2c_read_checksum(data);
|
|
GRIP_INFO("checksum read%d\n", ret);
|
|
|
|
ret = a96t3x6_fw_mode_exit(data);
|
|
GRIP_INFO("fw_write end\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void a96t3x6_release_fw(struct a96t3x6_data *data, u8 cmd)
|
|
{
|
|
switch (cmd) {
|
|
case BUILT_IN:
|
|
release_firmware(data->firm_data_bin);
|
|
break;
|
|
|
|
case SDCARD:
|
|
kfree(data->firm_data_ums);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int a96t3x6_flash_fw(struct a96t3x6_data *data, bool probe, u8 cmd)
|
|
{
|
|
int retry = 2;
|
|
int ret;
|
|
int block_count;
|
|
const u8 *fw_data;
|
|
|
|
ret = a96t3x6_get_fw_version(data, probe);
|
|
if (ret)
|
|
data->fw_ver = 0;
|
|
|
|
ret = a96t3x6_load_fw(data, cmd);
|
|
if (ret) {
|
|
GRIP_ERR("fw load fail\n");
|
|
return ret;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case BUILT_IN:
|
|
fw_data = data->firm_data_bin->data;
|
|
break;
|
|
|
|
case SDCARD:
|
|
fw_data = data->firm_data_ums;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
block_count = (int)(data->firm_size / 32);
|
|
|
|
while (retry--) {
|
|
ret = a96t3x6_fw_update(data, cmd);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
if (cmd == BUILT_IN) {
|
|
if ((data->checksum_h != data->checksum_h_bin) ||
|
|
(data->checksum_l != data->checksum_l_bin)) {
|
|
GRIP_ERR("checksum fail.(0x%x,0x%x),(0x%x,0x%x) retry:%d\n",
|
|
data->checksum_h, data->checksum_l,
|
|
data->checksum_h_bin, data->checksum_l_bin, retry);
|
|
ret = -1;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
a96t3x6_reset_for_bootmode(data);
|
|
usleep_range(RESET_DELAY, RESET_DELAY);
|
|
|
|
ret = a96t3x6_get_fw_version(data, true);
|
|
if (ret) {
|
|
GRIP_ERR("fw version read fail\n");
|
|
ret = -1;
|
|
continue;
|
|
}
|
|
|
|
if (data->fw_ver == 0) {
|
|
GRIP_ERR("fw version fail (0x%x)\n", data->fw_ver);
|
|
ret = -1;
|
|
continue;
|
|
}
|
|
|
|
if ((cmd == BUILT_IN) && (data->fw_ver != data->fw_ver_bin)) {
|
|
GRIP_ERR("fw version fail 0x%x, 0x%x\n",
|
|
data->fw_ver, data->fw_ver_bin);
|
|
ret = -1;
|
|
continue;
|
|
}
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
a96t3x6_release_fw(data, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void grip_always_active(struct a96t3x6_data *data, int on)
|
|
{
|
|
int ret, retry = 3;
|
|
u8 cmd, r_buf;
|
|
|
|
GRIP_INFO("Grip always active mode %d\n", on);
|
|
|
|
if (on == 1)
|
|
cmd = CMD_ON;
|
|
else
|
|
cmd = CMD_OFF;
|
|
|
|
while (retry--) {
|
|
ret = a96t3x6_i2c_write(data->client, REG_GRIP_ALWAYS_ACTIVE, &cmd);
|
|
if (ret < 0) {
|
|
GRIP_INFO("i2c write fail(%d)\n", ret);
|
|
continue;
|
|
}
|
|
|
|
msleep(20);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_GRIP_ALWAYS_ACTIVE, &r_buf, 1);
|
|
if (ret < 0) {
|
|
GRIP_INFO("i2c read fail(%d)\n", ret);
|
|
continue;
|
|
}
|
|
|
|
if ((cmd == CMD_ON && r_buf == GRIP_ALWAYS_ACTIVE_READY) ||
|
|
(cmd == CMD_OFF && r_buf == CMD_OFF))
|
|
break;
|
|
else
|
|
GRIP_INFO("Wrong value 0x%x, retry again %d\n", r_buf, retry);
|
|
}
|
|
|
|
if (retry < 0)
|
|
GRIP_INFO("failed to change grip always active mode\n");
|
|
else
|
|
GRIP_INFO("cmd 0x%x, return 0x%x\n", cmd, r_buf);
|
|
}
|
|
|
|
static ssize_t grip_fw_update(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
u8 cmd;
|
|
|
|
switch (*buf) {
|
|
case 's':
|
|
case 'S':
|
|
cmd = BUILT_IN;
|
|
break;
|
|
case 'i':
|
|
case 'I':
|
|
cmd = SDCARD;
|
|
break;
|
|
default:
|
|
data->fw_update_state = 2;
|
|
goto fw_update_out;
|
|
}
|
|
|
|
data->fw_update_state = 1;
|
|
disable_irq(data->irq);
|
|
data->enabled = false;
|
|
|
|
if (cmd == BUILT_IN) {
|
|
ret = a96t3x6_load_fw_kernel(data);
|
|
if (ret) {
|
|
GRIP_ERR("failed to load firmware(%d)\n", ret);
|
|
goto fw_update_out;
|
|
} else {
|
|
GRIP_INFO("fw version read success (%d)\n", ret);
|
|
}
|
|
}
|
|
ret = a96t3x6_flash_fw(data, false, cmd);
|
|
|
|
data->enabled = true;
|
|
enable_irq(data->irq);
|
|
if (ret) {
|
|
GRIP_ERR("failed to flash firmware(%d)\n", ret);
|
|
data->fw_update_state = 2;
|
|
} else {
|
|
GRIP_INFO("success\n");
|
|
data->fw_update_state = 0;
|
|
}
|
|
|
|
if (data->current_state) {
|
|
cmd = CMD_ON;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_ENABLE, &cmd);
|
|
if (ret < 0)
|
|
GRIP_INFO("failed to enable grip irq\n");
|
|
|
|
a96t3x6_check_first_status(data, 1);
|
|
}
|
|
|
|
#if defined(CONFIG_SENSOR_A96T3X6_LDO_SHARE)
|
|
GRIP_INFO("a96t3x6 register recovery\n");
|
|
input_report_rel(data->input_dev, REL_WHEEL, 1);
|
|
input_sync(data->input_dev);
|
|
#endif
|
|
|
|
fw_update_out:
|
|
GRIP_INFO("fw_update_state = %d\n", data->fw_update_state);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_fw_update_status(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int count = 0;
|
|
|
|
GRIP_INFO("%d\n", data->fw_update_state);
|
|
|
|
if (data->fw_update_state == 0)
|
|
count = snprintf(buf, PAGE_SIZE, "PASS\n");
|
|
else if (data->fw_update_state == 1)
|
|
count = snprintf(buf, PAGE_SIZE, "Downloading\n");
|
|
else if (data->fw_update_state == 2)
|
|
count = snprintf(buf, PAGE_SIZE, "Fail\n");
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t grip_irq_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int status = 0;
|
|
|
|
status = gpio_get_value(data->grip_int);
|
|
GRIP_INFO("status=%d\n", status);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", status);
|
|
}
|
|
|
|
static ssize_t grip_irq_en_cnt_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
GRIP_INFO("irq_en_cnt=%d\n", data->irq_en_cnt);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", data->irq_en_cnt);
|
|
}
|
|
|
|
static ssize_t grip_reg_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
u8 val = 0;
|
|
int offset = 0, i = 0;
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
for (i = 0; i < 128; i++) {
|
|
a96t3x6_i2c_read(data->client, i, &val, 1);
|
|
GRIP_INFO("reg=%02X val=%02X\n", i, val);
|
|
|
|
offset += snprintf(buf + offset, PAGE_SIZE - offset,
|
|
"reg=0x%x val=0x%x\n", i, val);
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static ssize_t grip_reg_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t size)
|
|
{
|
|
int regist = 0, val = 0;
|
|
u8 cmd = 0;
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
if (sscanf(buf, "%4x,%4x", ®ist, &val) != 2) {
|
|
GRIP_ERR("The number of data are wrong\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
GRIP_INFO("reg=0x%2x value=0x%2x\n", regist, val);
|
|
|
|
cmd = (u8) val;
|
|
a96t3x6_i2c_write(data->client, (u8)regist, &cmd);
|
|
|
|
return size;
|
|
}
|
|
|
|
static ssize_t grip_crc_check_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
#ifndef CONFIG_SENSORS_A96T3X6_CRC_CHECK
|
|
int ret;
|
|
unsigned char cmd[3] = {0x1B, 0x00, 0x10};
|
|
unsigned char checksum[2] = {0, };
|
|
|
|
i2c_master_send(data->client, cmd, 3);
|
|
usleep_range(50 * 1000, 50 * 1000);
|
|
|
|
ret = a96t3x6_i2c_read(data->client, 0x1B, checksum, 2);
|
|
|
|
if (ret < 0) {
|
|
GRIP_ERR("i2c read fail\n");
|
|
return snprintf(buf, PAGE_SIZE, "NG,0000\n");
|
|
}
|
|
|
|
GRIP_INFO("CRC:%02x%02x, BIN:%02x%02x\n", checksum[0], checksum[1],
|
|
data->checksum_h_bin, data->checksum_l_bin);
|
|
|
|
if ((checksum[0] != data->checksum_h_bin) ||
|
|
(checksum[1] != data->checksum_l_bin))
|
|
return snprintf(buf, PAGE_SIZE, "NG,%02x%02x\n",
|
|
checksum[0], checksum[1]);
|
|
else
|
|
return snprintf(buf, PAGE_SIZE, "OK,%02x%02x\n",
|
|
checksum[0], checksum[1]);
|
|
#else
|
|
{
|
|
int val;
|
|
val = a96t3x6_crc_check(data);
|
|
|
|
if (data->crc_check == CRC_PASS)
|
|
return snprintf(buf, PAGE_SIZE, "OK,%02x\n", val);
|
|
else
|
|
return snprintf(buf, PAGE_SIZE, "NG,%02x\n", val);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static ssize_t a96t3x6_enable_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", data->current_state);
|
|
}
|
|
|
|
#if defined(CONFIG_SENSOR_A96T3X6_LDO_SHARE)
|
|
static ssize_t grip_register_recover_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t size)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
u8 reg_value = 0;
|
|
u8 cmd = 0;
|
|
u8 check = 0;
|
|
|
|
GRIP_INFO("Register recover\n");
|
|
ret = kstrtou8(buf, 10, &check);
|
|
|
|
if(check == 1)
|
|
{
|
|
//register reset
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_ENABLE, ®_value, 1);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
return size;
|
|
}
|
|
|
|
GRIP_INFO("reg=0x24 val=%02X\n", reg_value);
|
|
|
|
if(data->current_state) {
|
|
if(reg_value == CMD_OFF) {
|
|
GRIP_ERR("REG_SAR_ENABLE register recover after HW reset\n");
|
|
cmd = CMD_ON;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_ENABLE, &cmd);
|
|
if (ret < 0)
|
|
GRIP_INFO("failed to enable grip irq\n");
|
|
a96t3x6_check_first_status(data, 1);
|
|
}
|
|
}
|
|
|
|
ret = a96t3x6_i2c_read(data->client, REG_SAR_SENSING, ®_value, 1);
|
|
if (ret < 0) {
|
|
GRIP_ERR("fail(%d)\n", ret);
|
|
return size;
|
|
}
|
|
|
|
GRIP_INFO("reg=0x25 val=%02X\n", reg_value);
|
|
|
|
if (data->earjack_noise)
|
|
{
|
|
if(!data->current_state && data->earjack)
|
|
{
|
|
if(reg_value == CMD_ON)
|
|
{
|
|
GRIP_ERR("REG_SAR_SENSING register recover after HW reset\n");
|
|
cmd = CMD_OFF;
|
|
ret = a96t3x6_i2c_write(data->client, REG_SAR_SENSING, &cmd);
|
|
if (ret < 0)
|
|
GRIP_INFO("failed to enable grip irq\n");
|
|
a96t3x6_check_first_status(data, 1);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
GRIP_INFO("Unsupported Command\n");
|
|
}
|
|
|
|
return size;
|
|
}
|
|
#endif
|
|
|
|
static DEVICE_ATTR(grip_threshold, 0444, grip_threshold_show, NULL);
|
|
static DEVICE_ATTR(grip_total_cap, 0444, grip_total_cap_show, NULL);
|
|
static DEVICE_ATTR(grip_sar_enable, 0664, grip_sar_enable_show,
|
|
grip_sar_enable_store);
|
|
static DEVICE_ATTR(grip_sw_reset_ready, 0444, grip_sw_reset_ready_show, NULL);
|
|
static DEVICE_ATTR(grip_sw_reset, 0220, NULL, grip_sw_reset);
|
|
static DEVICE_ATTR(grip_earjack, 0220, NULL, grip_sensing_change);
|
|
static DEVICE_ATTR(grip, 0444, grip_show, NULL);
|
|
static DEVICE_ATTR(grip_baseline, 0444, grip_baseline_show, NULL);
|
|
static DEVICE_ATTR(grip_raw, 0444, grip_raw_show, NULL);
|
|
static DEVICE_ATTR(grip_gain, 0444, grip_gain_show, NULL);
|
|
static DEVICE_ATTR(grip_check, 0444, grip_check_show, NULL);
|
|
#ifndef CONFIG_SAMSUNG_PRODUCT_SHIP
|
|
static DEVICE_ATTR(grip_sar_only_mode, 0220, NULL, grip_mode_change);
|
|
static DEVICE_ATTR(grip_sar_press_threshold, 0220,
|
|
NULL, grip_sar_press_threshold_store);
|
|
static DEVICE_ATTR(grip_sar_release_threshold, 0220,
|
|
NULL, grip_sar_release_threshold_store);
|
|
#endif
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
static DEVICE_ATTR(grip_irq_count, 0664, a96t3x6_irq_count_show,
|
|
a96t3x6_irq_count_store);
|
|
#endif
|
|
static DEVICE_ATTR(name, 0444, grip_name_show, NULL);
|
|
static DEVICE_ATTR(vendor, 0444, grip_vendor_show, NULL);
|
|
static DEVICE_ATTR(grip_firm_version_phone, 0444, bin_fw_ver, NULL);
|
|
static DEVICE_ATTR(grip_firm_version_panel, 0444, read_fw_ver, NULL);
|
|
static DEVICE_ATTR(grip_firm_update, 0220, NULL, grip_fw_update);
|
|
static DEVICE_ATTR(grip_firm_update_status, 0444, grip_fw_update_status, NULL);
|
|
static DEVICE_ATTR(grip_irq_state, 0444, grip_irq_state_show, NULL);
|
|
static DEVICE_ATTR(grip_irq_en_cnt, 0444, grip_irq_en_cnt_show, NULL);
|
|
static DEVICE_ATTR(grip_reg_rw, 0664, grip_reg_show, grip_reg_store);
|
|
static DEVICE_ATTR(grip_crc_check, 0444, grip_crc_check_show, NULL);
|
|
#ifdef CONFIG_SENSOR_A96T3X6_LDO_SHARE
|
|
static DEVICE_ATTR(grip_register_recover, 0220, NULL, grip_register_recover_store);
|
|
#endif
|
|
|
|
static struct device_attribute *grip_sensor_attributes[] = {
|
|
&dev_attr_grip_threshold,
|
|
&dev_attr_grip_total_cap,
|
|
&dev_attr_grip_sar_enable,
|
|
&dev_attr_grip_sw_reset,
|
|
&dev_attr_grip_sw_reset_ready,
|
|
&dev_attr_grip_earjack,
|
|
&dev_attr_grip,
|
|
&dev_attr_grip_baseline,
|
|
&dev_attr_grip_raw,
|
|
&dev_attr_grip_gain,
|
|
&dev_attr_grip_check,
|
|
#ifndef CONFIG_SAMSUNG_PRODUCT_SHIP
|
|
&dev_attr_grip_sar_only_mode,
|
|
&dev_attr_grip_sar_press_threshold,
|
|
&dev_attr_grip_sar_release_threshold,
|
|
#endif
|
|
#ifdef CONFIG_SEC_FACTORY
|
|
&dev_attr_grip_irq_count,
|
|
#endif
|
|
&dev_attr_name,
|
|
&dev_attr_vendor,
|
|
&dev_attr_grip_firm_version_phone,
|
|
&dev_attr_grip_firm_version_panel,
|
|
&dev_attr_grip_firm_update,
|
|
&dev_attr_grip_firm_update_status,
|
|
&dev_attr_grip_irq_state,
|
|
&dev_attr_grip_irq_en_cnt,
|
|
&dev_attr_grip_reg_rw,
|
|
&dev_attr_grip_crc_check,
|
|
#ifdef CONFIG_SENSOR_A96T3X6_LDO_SHARE
|
|
&dev_attr_grip_register_recover,
|
|
#endif
|
|
NULL,
|
|
};
|
|
|
|
static DEVICE_ATTR(enable, 0664, a96t3x6_enable_show, grip_sar_enable_store);
|
|
|
|
static struct attribute *a96t3x6_attributes[] = {
|
|
&dev_attr_enable.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group a96t3x6_attribute_group = {
|
|
.attrs = a96t3x6_attributes
|
|
};
|
|
|
|
static int a96t3x6_fw_check(struct a96t3x6_data *data)
|
|
{
|
|
int ret;
|
|
bool force = false;
|
|
|
|
if (data->bringup) {
|
|
GRIP_INFO("bring up mode. skip firmware check\n");
|
|
return 0;
|
|
}
|
|
ret = a96t3x6_load_fw_kernel(data);
|
|
|
|
if (ret) {
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
GRIP_ERR("fw was not loaded yet from ueventd\n");
|
|
return ret;
|
|
#else
|
|
GRIP_ERR("failed load_fw_kernel(%d)\n", ret);
|
|
#endif
|
|
} else
|
|
GRIP_INFO("fw version read success (%d)\n", ret);
|
|
|
|
ret = a96t3x6_get_fw_version(data, true);
|
|
if (ret)
|
|
GRIP_ERR("i2c fail(%d), addr[%d]\n", ret, data->client->addr);
|
|
|
|
if (data->md_ver != data->md_ver_bin) {
|
|
GRIP_ERR("MD version is different.(IC %x, BN %x). Do force FW update\n",
|
|
data->md_ver, data->md_ver_bin);
|
|
force = true;
|
|
}
|
|
|
|
if (data->fw_ver < data->fw_ver_bin || data->fw_ver > TEST_FIRMWARE_DETECT_VER
|
|
|| force == true || data->crc_check == CRC_FAIL) {
|
|
GRIP_ERR("excute fw update (0x%x -> 0x%x)\n",
|
|
data->fw_ver, data->fw_ver_bin);
|
|
ret = a96t3x6_flash_fw(data, true, BUILT_IN);
|
|
if (ret)
|
|
GRIP_ERR("failed to a96t3x6_flash_fw (%d)\n", ret);
|
|
else
|
|
GRIP_INFO("fw update success\n");
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_power_onoff(void *pdata, bool on)
|
|
{
|
|
struct a96t3x6_data *data = (struct a96t3x6_data *)pdata;
|
|
|
|
int ret = 0;
|
|
|
|
if (data->ldo_en) {
|
|
ret = gpio_request(data->ldo_en, "a96t3x6_ldo_en");
|
|
if (ret < 0) {
|
|
GRIP_ERR("gpio %d request failed %d\n", data->ldo_en, ret);
|
|
return ret;
|
|
}
|
|
gpio_set_value(data->ldo_en, on);
|
|
GRIP_INFO("ldo_en power %d\n", on);
|
|
gpio_free(data->ldo_en);
|
|
}
|
|
|
|
data->dvdd_vreg = regulator_get(NULL, "vtouch_2.8v");
|
|
if (IS_ERR(data->dvdd_vreg)) {
|
|
data->dvdd_vreg = NULL;
|
|
GRIP_ERR("dvdd_vreg get error, ignoring\n");
|
|
}
|
|
|
|
if (on) {
|
|
if (data->dvdd_vreg) {
|
|
ret = regulator_enable(data->dvdd_vreg);
|
|
if (ret) {
|
|
GRIP_ERR("dvdd reg enable fail\n");
|
|
return ret;
|
|
}
|
|
}
|
|
} else {
|
|
if (data->dvdd_vreg) {
|
|
ret = regulator_disable(data->dvdd_vreg);
|
|
if (ret) {
|
|
GRIP_ERR("dvdd reg disable fail\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
regulator_put(data->dvdd_vreg);
|
|
|
|
GRIP_INFO("%s\n", on ? "on" : "off");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_irq_init(struct device *dev,
|
|
struct a96t3x6_data *data)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = gpio_request(data->grip_int, "a96t3x6_IRQ");
|
|
if (ret < 0) {
|
|
GRIP_ERR("gpio %d request failed (%d)\n", data->grip_int, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_direction_input(data->grip_int);
|
|
if (ret < 0) {
|
|
GRIP_ERR("failed to set direction input gpio %d(%d)\n",
|
|
data->grip_int, ret);
|
|
gpio_free(data->grip_int);
|
|
return ret;
|
|
}
|
|
// assigned power function to function ptr
|
|
data->power = a96t3x6_power_onoff;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_parse_dt(struct a96t3x6_data *data, struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct pinctrl *p;
|
|
int ret;
|
|
enum of_gpio_flags flags;
|
|
|
|
data->grip_int = of_get_named_gpio(np, "a96t3x6,irq_gpio", 0);
|
|
if (data->grip_int < 0) {
|
|
GRIP_ERR("Cannot get grip_int\n");
|
|
return data->grip_int;
|
|
}
|
|
|
|
data->ldo_en = of_get_named_gpio_flags(np, "a96t3x6,ldo_en", 0, &flags);
|
|
if (data->ldo_en < 0) {
|
|
GRIP_ERR("fail to get ldo_en\n");
|
|
data->ldo_en = 0;
|
|
} else {
|
|
ret = gpio_request(data->ldo_en, "a96t3x6_ldo_en");
|
|
if (ret < 0) {
|
|
GRIP_ERR("gpio %d request failed %d\n", data->ldo_en, ret);
|
|
return ret;
|
|
}
|
|
gpio_direction_output(data->ldo_en, 1);
|
|
gpio_free(data->ldo_en);
|
|
}
|
|
|
|
ret = of_property_read_string(np, "a96t3x6,fw_path", (const char **)&data->fw_path);
|
|
if (ret < 0) {
|
|
GRIP_ERR("failed to read fw_path %d\n", ret);
|
|
data->fw_path = TK_FW_PATH_BIN;
|
|
}
|
|
GRIP_INFO("fw path %s\n", data->fw_path);
|
|
|
|
data->bringup = of_property_read_bool(np, "a96t3x6,bringup");
|
|
|
|
ret = of_property_read_u32(np, "a96t3x6,firmup_cmd", &data->firmup_cmd);
|
|
if (ret < 0)
|
|
data->firmup_cmd = 0;
|
|
|
|
ret = of_property_read_u32(np, "a96t3x6,earjack_noise", &data->earjack_noise);
|
|
if (ret < 0)
|
|
data->earjack_noise = 0;
|
|
|
|
ret = of_property_read_u32(np, "a96t3x6,identity_number", &data->identity_number);
|
|
if (ret < 0)
|
|
data->identity_number = 0;
|
|
|
|
p = pinctrl_get_select_default(dev);
|
|
if (IS_ERR(p)) {
|
|
GRIP_INFO("failed pinctrl_get\n");
|
|
}
|
|
|
|
GRIP_INFO("grip_int:%d, ldo_en:%d\n", data->grip_int, data->ldo_en);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CCIC_NOTIFIER) && defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER)
|
|
static int a96t3x6_ccic_handle_notification(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
CC_NOTI_ATTACH_TYPEDEF usb_typec_info = *(CC_NOTI_ATTACH_TYPEDEF *)data;
|
|
struct a96t3x6_data *grip_data =
|
|
container_of(nb, struct a96t3x6_data, cpuidle_ccic_nb);
|
|
u8 cmd = CMD_ON;
|
|
|
|
if (usb_typec_info.src != CCIC_NOTIFY_DEV_MUIC ||
|
|
usb_typec_info.dest != CCIC_NOTIFY_DEV_BATTERY)
|
|
return 0;
|
|
|
|
GRIP_INFO("(%ld) %01x, %01x, %02x, %04x, %04x, %04x\n",
|
|
action, usb_typec_info.src, usb_typec_info.dest,
|
|
usb_typec_info.id, usb_typec_info.attach, usb_typec_info.rprd,
|
|
usb_typec_info.cable_type);
|
|
|
|
if (usb_typec_info.cable_type == 0)
|
|
return 0;
|
|
|
|
switch (usb_typec_info.cable_type) {
|
|
case ATTACHED_DEV_NONE_MUIC:
|
|
case ATTACHED_DEV_JIG_UART_OFF_MUIC:
|
|
case ATTACHED_DEV_JIG_UART_OFF_VB_MUIC: /* VBUS enabled */
|
|
case ATTACHED_DEV_JIG_UART_OFF_VB_OTG_MUIC: /* for otg test */
|
|
case ATTACHED_DEV_JIG_UART_OFF_VB_FG_MUIC: /* for fuelgauge test */
|
|
case ATTACHED_DEV_JIG_UART_ON_MUIC:
|
|
case ATTACHED_DEV_JIG_UART_ON_VB_MUIC: /* VBUS enabled */
|
|
case ATTACHED_DEV_JIG_USB_OFF_MUIC:
|
|
case ATTACHED_DEV_JIG_USB_ON_MUIC:
|
|
GRIP_INFO("skip cable = %u, attach = %u\n",
|
|
usb_typec_info.cable_type, usb_typec_info.attach);
|
|
break;
|
|
default:
|
|
if (usb_typec_info.attach == MUIC_NOTIFY_CMD_ATTACH) {
|
|
cmd = CMD_OFF;
|
|
a96t3x6_i2c_write(grip_data->client, REG_TSPTA, &cmd);
|
|
GRIP_INFO("TA/USB is inserted\n");
|
|
} else if (usb_typec_info.attach == MUIC_NOTIFY_CMD_DETACH) {
|
|
cmd = CMD_ON;
|
|
a96t3x6_i2c_write(grip_data->client, REG_TSPTA, &cmd);
|
|
GRIP_INFO("TA/USB is removed\n");
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#elif defined(CONFIG_MUIC_NOTIFIER)
|
|
static int a96t3x6_cpuidle_muic_notifier(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct a96t3x6_data *grip_data;
|
|
u8 cmd = CMD_ON;
|
|
|
|
muic_attached_dev_t attached_dev = *(muic_attached_dev_t *)data;
|
|
|
|
grip_data = container_of(nb, struct a96t3x6_data, cpuidle_muic_nb);
|
|
switch (attached_dev) {
|
|
case ATTACHED_DEV_OTG_MUIC:
|
|
case ATTACHED_DEV_USB_MUIC:
|
|
case ATTACHED_DEV_TA_MUIC:
|
|
case ATTACHED_DEV_AFC_CHARGER_PREPARE_MUIC:
|
|
case ATTACHED_DEV_AFC_CHARGER_9V_MUIC:
|
|
if (action == MUIC_NOTIFY_CMD_ATTACH) {
|
|
cmd = CMD_OFF;
|
|
GRIP_INFO("TA/USB is inserted\n");
|
|
}
|
|
else if (action == MUIC_NOTIFY_CMD_DETACH) {
|
|
cmd = CMD_ON;
|
|
GRIP_INFO("TA/USB is removed\n");
|
|
}
|
|
a96t3x6_i2c_write(grip_data->client, REG_TSPTA, &cmd);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
GRIP_INFO("dev=%d, action=%lu\n", attached_dev, action);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
#endif
|
|
|
|
static int a96t3x6_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct a96t3x6_data *data;
|
|
struct input_dev *input_dev;
|
|
int ret;
|
|
|
|
GRIP_INFO("start (0x%x)\n", client->addr);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
GRIP_ERR("i2c_check_functionality fail\n");
|
|
return -EIO;
|
|
}
|
|
|
|
data = kzalloc(sizeof(struct a96t3x6_data), GFP_KERNEL);
|
|
if (!data) {
|
|
GRIP_ERR("Failed to allocate memory\n");
|
|
ret = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev) {
|
|
GRIP_ERR("Failed to allocate memory for input device\n");
|
|
ret = -ENOMEM;
|
|
goto err_input_alloc;
|
|
}
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->probe_done = false;
|
|
data->earjack = 0;
|
|
data->current_state = false;
|
|
data->expect_state = false;
|
|
data->skip_event = false;
|
|
data->sar_mode = false;
|
|
data->crc_check = CRC_PASS;
|
|
wake_lock_init(&data->grip_wake_lock, WAKE_LOCK_SUSPEND, "grip wake lock");
|
|
|
|
ret = a96t3x6_parse_dt(data, &client->dev);
|
|
if (ret) {
|
|
GRIP_ERR("failed to a96t3x6_parse_dt\n");
|
|
goto err_config;
|
|
}
|
|
|
|
ret = a96t3x6_irq_init(&client->dev, data);
|
|
if (ret) {
|
|
GRIP_ERR("failed to init reg\n");
|
|
goto err_config;
|
|
}
|
|
|
|
if (data->power) {
|
|
data->power(data, true);
|
|
usleep_range(RESET_DELAY, RESET_DELAY);
|
|
}
|
|
|
|
data->irq = -1;
|
|
client->irq = gpio_to_irq(data->grip_int);
|
|
mutex_init(&data->lock);
|
|
|
|
i2c_set_clientdata(client, data);
|
|
#ifndef CONFIG_SENSORS_FW_VENDOR
|
|
#if defined(CONFIG_SEC_FACTORY) && defined(CONFIG_SENSORS_A96T3X6_CRC_CHECK)
|
|
a96t3x6_crc_check(data);
|
|
#endif
|
|
ret = a96t3x6_fw_check(data);
|
|
if (ret) {
|
|
GRIP_ERR("failed to firmware check (%d)\n", ret);
|
|
goto err_reg_input_dev;
|
|
}
|
|
#else
|
|
{
|
|
/*
|
|
* Add probe fail routine if i2c is failed
|
|
* non fw IC returns 0 from ALL register but i2c is success.
|
|
*/
|
|
u8 buf;
|
|
ret = a96t3x6_i2c_read(client, REG_MODEL_NO, &buf, 1);
|
|
if (ret) {
|
|
GRIP_ERR("i2c is failed %d\n", ret);
|
|
goto err_reg_input_dev;
|
|
} else {
|
|
GRIP_INFO("i2c is normal, model_no = 0x%2x\n", buf);
|
|
}
|
|
}
|
|
#endif
|
|
input_dev->name = MODULE_NAME;
|
|
input_dev->id.bustype = BUS_I2C;
|
|
|
|
input_set_capability(input_dev, EV_REL, REL_MISC);
|
|
#ifdef CONFIG_SENSOR_A96T3X6_LDO_SHARE
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
#endif
|
|
input_set_drvdata(input_dev, data);
|
|
|
|
INIT_DELAYED_WORK(&data->debug_work, a96t3x6_debug_work_func);
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
INIT_DELAYED_WORK(&data->firmware_work, a96t3x6_firmware_work_func);
|
|
#endif
|
|
ret = input_register_device(input_dev);
|
|
if (ret) {
|
|
input_free_device(input_dev);
|
|
GRIP_ERR("failed to register input dev (%d)\n",
|
|
ret);
|
|
goto err_reg_input_dev;
|
|
}
|
|
|
|
ret = sensors_create_symlink(input_dev);
|
|
if (ret < 0) {
|
|
GRIP_ERR("Failed to create sysfs symlink\n");
|
|
goto err_sysfs_symlink;
|
|
}
|
|
|
|
ret = sysfs_create_group(&data->input_dev->dev.kobj,
|
|
&a96t3x6_attribute_group);
|
|
if (ret < 0) {
|
|
GRIP_ERR("Failed to create sysfs group\n");
|
|
goto err_sysfs_group;
|
|
}
|
|
|
|
ret = sensors_register(data->dev, data, grip_sensor_attributes,
|
|
MODULE_NAME);
|
|
if (ret) {
|
|
GRIP_ERR("could not register grip_sensor(%d)\n", ret);
|
|
goto err_sensor_register;
|
|
}
|
|
|
|
data->enabled = true;
|
|
|
|
ret = request_threaded_irq(client->irq, NULL, a96t3x6_interrupt,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT, MODEL_NAME, data);
|
|
|
|
disable_irq(client->irq);
|
|
|
|
if (ret < 0) {
|
|
GRIP_ERR("Failed to register interrupt\n");
|
|
goto err_req_irq;
|
|
}
|
|
data->irq = client->irq;
|
|
data->dev = &client->dev;
|
|
|
|
device_init_wakeup(&client->dev, true);
|
|
|
|
a96t3x6_set_debug_work(data, 1, 20000);
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
a96t3x6_set_firmware_work(data, 1, 1);
|
|
#endif
|
|
#if defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER) && defined(CONFIG_CCIC_NOTIFIER)
|
|
manager_notifier_register(&data->cpuidle_ccic_nb,
|
|
a96t3x6_ccic_handle_notification, MANAGER_NOTIFY_CCIC_SENSORHUB);
|
|
#elif defined(CONFIG_MUIC_NOTIFIER)
|
|
muic_notifier_register(&data->cpuidle_muic_nb,
|
|
a96t3x6_cpuidle_muic_notifier, MUIC_NOTIFY_DEV_CPUIDLE);
|
|
#endif
|
|
|
|
GRIP_INFO("done\n");
|
|
data->probe_done = true;
|
|
data->resume_called = false;
|
|
return 0;
|
|
|
|
err_req_irq:
|
|
sensors_unregister(data->dev, grip_sensor_attributes);
|
|
err_sensor_register:
|
|
sysfs_remove_group(&data->input_dev->dev.kobj,
|
|
&a96t3x6_attribute_group);
|
|
err_sysfs_group:
|
|
sensors_remove_symlink(input_dev);
|
|
err_sysfs_symlink:
|
|
input_unregister_device(input_dev);
|
|
err_reg_input_dev:
|
|
mutex_destroy(&data->lock);
|
|
gpio_free(data->grip_int);
|
|
err_config:
|
|
wake_lock_destroy(&data->grip_wake_lock);
|
|
err_input_alloc:
|
|
kfree(data);
|
|
err_alloc:
|
|
GRIP_ERR("failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int a96t3x6_remove(struct i2c_client *client)
|
|
{
|
|
struct a96t3x6_data *data = i2c_get_clientdata(client);
|
|
|
|
if (data->enabled)
|
|
data->power(data, false);
|
|
|
|
data->enabled = false;
|
|
device_init_wakeup(&client->dev, false);
|
|
wake_lock_destroy(&data->grip_wake_lock);
|
|
cancel_delayed_work_sync(&data->debug_work);
|
|
#ifdef CONFIG_SENSORS_FW_VENDOR
|
|
cancel_delayed_work_sync(&data->firmware_work);
|
|
#endif
|
|
if (data->irq >= 0)
|
|
free_irq(data->irq, data);
|
|
sensors_unregister(data->dev, grip_sensor_attributes);
|
|
sysfs_remove_group(&data->input_dev->dev.kobj,
|
|
&a96t3x6_attribute_group);
|
|
sensors_remove_symlink(data->input_dev);
|
|
input_unregister_device(data->input_dev);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a96t3x6_suspend(struct device *dev)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
data->resume_called = false;
|
|
GRIP_INFO("\n");
|
|
a96t3x6_sar_only_mode(data, 1);
|
|
a96t3x6_set_debug_work(data, 0, 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a96t3x6_resume(struct device *dev)
|
|
{
|
|
struct a96t3x6_data *data = dev_get_drvdata(dev);
|
|
|
|
GRIP_INFO("\n");
|
|
data->resume_called = true;
|
|
a96t3x6_set_debug_work(data, 1, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void a96t3x6_shutdown(struct i2c_client *client)
|
|
{
|
|
struct a96t3x6_data *data = i2c_get_clientdata(client);
|
|
|
|
a96t3x6_set_debug_work(data, 0, 1000);
|
|
|
|
if (data->enabled) {
|
|
disable_irq(data->irq);
|
|
data->power(data, false);
|
|
}
|
|
data->enabled = false;
|
|
}
|
|
|
|
static const struct i2c_device_id a96t3x6_device_id[] = {
|
|
{MODULE_NAME, 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, a96t3x6_device_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id a96t3x6_match_table[] = {
|
|
{ .compatible = "a96t3x6_wifi",},
|
|
{ },
|
|
};
|
|
#else
|
|
#define a96t3x6_match_table NULL
|
|
#endif
|
|
|
|
static const struct dev_pm_ops a96t3x6_pm_ops = {
|
|
.suspend = a96t3x6_suspend,
|
|
.resume = a96t3x6_resume,
|
|
};
|
|
|
|
static struct i2c_driver a96t3x6_driver = {
|
|
.probe = a96t3x6_probe,
|
|
.remove = a96t3x6_remove,
|
|
.shutdown = a96t3x6_shutdown,
|
|
.id_table = a96t3x6_device_id,
|
|
.driver = {
|
|
.name = MODEL_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = a96t3x6_match_table,
|
|
.pm = &a96t3x6_pm_ops
|
|
},
|
|
};
|
|
|
|
static int __init a96t3x6_init(void)
|
|
{
|
|
return i2c_add_driver(&a96t3x6_driver);
|
|
}
|
|
|
|
static void __exit a96t3x6_exit(void)
|
|
{
|
|
i2c_del_driver(&a96t3x6_driver);
|
|
}
|
|
|
|
module_init(a96t3x6_init);
|
|
module_exit(a96t3x6_exit);
|
|
|
|
MODULE_AUTHOR("Samsung Electronics");
|
|
MODULE_DESCRIPTION("Grip sensor driver for A96T3X6 chip");
|
|
MODULE_LICENSE("GPL");
|