581 lines
15 KiB
C
Executable File
581 lines
15 KiB
C
Executable File
/*
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define CFG_OFFSET 0x00
|
|
#define CFG_RESET_SHIFT 31
|
|
#define CFG_EN_SHIFT 30
|
|
#define CFG_M_RETRY_CNT_SHIFT 16
|
|
#define CFG_M_RETRY_CNT_MASK 0x0f
|
|
|
|
#define TIM_CFG_OFFSET 0x04
|
|
#define TIM_CFG_MODE_400_SHIFT 31
|
|
|
|
#define M_FIFO_CTRL_OFFSET 0x0c
|
|
#define M_FIFO_RX_FLUSH_SHIFT 31
|
|
#define M_FIFO_TX_FLUSH_SHIFT 30
|
|
#define M_FIFO_RX_CNT_SHIFT 16
|
|
#define M_FIFO_RX_CNT_MASK 0x7f
|
|
#define M_FIFO_RX_THLD_SHIFT 8
|
|
#define M_FIFO_RX_THLD_MASK 0x3f
|
|
|
|
#define M_CMD_OFFSET 0x30
|
|
#define M_CMD_START_BUSY_SHIFT 31
|
|
#define M_CMD_STATUS_SHIFT 25
|
|
#define M_CMD_STATUS_MASK 0x07
|
|
#define M_CMD_STATUS_SUCCESS 0x0
|
|
#define M_CMD_STATUS_LOST_ARB 0x1
|
|
#define M_CMD_STATUS_NACK_ADDR 0x2
|
|
#define M_CMD_STATUS_NACK_DATA 0x3
|
|
#define M_CMD_STATUS_TIMEOUT 0x4
|
|
#define M_CMD_PROTOCOL_SHIFT 9
|
|
#define M_CMD_PROTOCOL_MASK 0xf
|
|
#define M_CMD_PROTOCOL_BLK_WR 0x7
|
|
#define M_CMD_PROTOCOL_BLK_RD 0x8
|
|
#define M_CMD_PEC_SHIFT 8
|
|
#define M_CMD_RD_CNT_SHIFT 0
|
|
#define M_CMD_RD_CNT_MASK 0xff
|
|
|
|
#define IE_OFFSET 0x38
|
|
#define IE_M_RX_FIFO_FULL_SHIFT 31
|
|
#define IE_M_RX_THLD_SHIFT 30
|
|
#define IE_M_START_BUSY_SHIFT 28
|
|
#define IE_M_TX_UNDERRUN_SHIFT 27
|
|
|
|
#define IS_OFFSET 0x3c
|
|
#define IS_M_RX_FIFO_FULL_SHIFT 31
|
|
#define IS_M_RX_THLD_SHIFT 30
|
|
#define IS_M_START_BUSY_SHIFT 28
|
|
#define IS_M_TX_UNDERRUN_SHIFT 27
|
|
|
|
#define M_TX_OFFSET 0x40
|
|
#define M_TX_WR_STATUS_SHIFT 31
|
|
#define M_TX_DATA_SHIFT 0
|
|
#define M_TX_DATA_MASK 0xff
|
|
|
|
#define M_RX_OFFSET 0x44
|
|
#define M_RX_STATUS_SHIFT 30
|
|
#define M_RX_STATUS_MASK 0x03
|
|
#define M_RX_PEC_ERR_SHIFT 29
|
|
#define M_RX_DATA_SHIFT 0
|
|
#define M_RX_DATA_MASK 0xff
|
|
|
|
#define I2C_TIMEOUT_MSEC 50000
|
|
#define M_TX_RX_FIFO_SIZE 64
|
|
|
|
enum bus_speed_index {
|
|
I2C_SPD_100K = 0,
|
|
I2C_SPD_400K,
|
|
};
|
|
|
|
struct bcm_iproc_i2c_dev {
|
|
struct device *device;
|
|
int irq;
|
|
|
|
void __iomem *base;
|
|
|
|
struct i2c_adapter adapter;
|
|
unsigned int bus_speed;
|
|
|
|
struct completion done;
|
|
int xfer_is_done;
|
|
|
|
struct i2c_msg *msg;
|
|
|
|
/* bytes that have been transferred */
|
|
unsigned int tx_bytes;
|
|
};
|
|
|
|
/*
|
|
* Can be expanded in the future if more interrupt status bits are utilized
|
|
*/
|
|
#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT))
|
|
|
|
static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
|
|
{
|
|
struct bcm_iproc_i2c_dev *iproc_i2c = data;
|
|
u32 status = readl(iproc_i2c->base + IS_OFFSET);
|
|
|
|
status &= ISR_MASK;
|
|
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
/* TX FIFO is empty and we have more data to send */
|
|
if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) {
|
|
struct i2c_msg *msg = iproc_i2c->msg;
|
|
unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes;
|
|
unsigned int i;
|
|
u32 val;
|
|
|
|
/* can only fill up to the FIFO size */
|
|
tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE);
|
|
for (i = 0; i < tx_bytes; i++) {
|
|
/* start from where we left over */
|
|
unsigned int idx = iproc_i2c->tx_bytes + i;
|
|
|
|
val = msg->buf[idx];
|
|
|
|
/* mark the last byte */
|
|
if (idx == msg->len - 1) {
|
|
u32 tmp;
|
|
|
|
val |= BIT(M_TX_WR_STATUS_SHIFT);
|
|
|
|
/*
|
|
* Since this is the last byte, we should
|
|
* now disable TX FIFO underrun interrupt
|
|
*/
|
|
tmp = readl(iproc_i2c->base + IE_OFFSET);
|
|
tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT);
|
|
writel(tmp, iproc_i2c->base + IE_OFFSET);
|
|
}
|
|
|
|
/* load data into TX FIFO */
|
|
writel(val, iproc_i2c->base + M_TX_OFFSET);
|
|
}
|
|
/* update number of transferred bytes */
|
|
iproc_i2c->tx_bytes += tx_bytes;
|
|
}
|
|
|
|
if (status & BIT(IS_M_START_BUSY_SHIFT)) {
|
|
iproc_i2c->xfer_is_done = 1;
|
|
complete(&iproc_i2c->done);
|
|
}
|
|
|
|
writel(status, iproc_i2c->base + IS_OFFSET);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
|
|
{
|
|
u32 val;
|
|
|
|
/* put controller in reset */
|
|
val = readl(iproc_i2c->base + CFG_OFFSET);
|
|
val |= 1 << CFG_RESET_SHIFT;
|
|
val &= ~(1 << CFG_EN_SHIFT);
|
|
writel(val, iproc_i2c->base + CFG_OFFSET);
|
|
|
|
/* wait 100 usec per spec */
|
|
udelay(100);
|
|
|
|
/* bring controller out of reset */
|
|
val &= ~(1 << CFG_RESET_SHIFT);
|
|
writel(val, iproc_i2c->base + CFG_OFFSET);
|
|
|
|
/* flush TX/RX FIFOs and set RX FIFO threshold to zero */
|
|
val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT);
|
|
writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
|
|
/* disable all interrupts */
|
|
writel(0, iproc_i2c->base + IE_OFFSET);
|
|
|
|
/* clear all pending interrupts */
|
|
writel(0xffffffff, iproc_i2c->base + IS_OFFSET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
|
|
bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(iproc_i2c->base + CFG_OFFSET);
|
|
if (enable)
|
|
val |= BIT(CFG_EN_SHIFT);
|
|
else
|
|
val &= ~BIT(CFG_EN_SHIFT);
|
|
writel(val, iproc_i2c->base + CFG_OFFSET);
|
|
}
|
|
|
|
static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(iproc_i2c->base + M_CMD_OFFSET);
|
|
val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK;
|
|
|
|
switch (val) {
|
|
case M_CMD_STATUS_SUCCESS:
|
|
return 0;
|
|
|
|
case M_CMD_STATUS_LOST_ARB:
|
|
dev_dbg(iproc_i2c->device, "lost bus arbitration\n");
|
|
return -EAGAIN;
|
|
|
|
case M_CMD_STATUS_NACK_ADDR:
|
|
dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr);
|
|
return -ENXIO;
|
|
|
|
case M_CMD_STATUS_NACK_DATA:
|
|
dev_dbg(iproc_i2c->device, "NAK data\n");
|
|
return -ENXIO;
|
|
|
|
case M_CMD_STATUS_TIMEOUT:
|
|
dev_dbg(iproc_i2c->device, "bus timeout\n");
|
|
return -ETIMEDOUT;
|
|
|
|
default:
|
|
dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
|
|
|
|
/* re-initialize i2c for recovery */
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
|
|
bcm_iproc_i2c_init(iproc_i2c);
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
|
|
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
|
|
struct i2c_msg *msg)
|
|
{
|
|
int ret, i;
|
|
u8 addr;
|
|
u32 val;
|
|
unsigned int tx_bytes;
|
|
unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC);
|
|
|
|
/* check if bus is busy */
|
|
if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
|
|
BIT(M_CMD_START_BUSY_SHIFT))) {
|
|
dev_warn(iproc_i2c->device, "bus is busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
iproc_i2c->msg = msg;
|
|
|
|
/* format and load slave address into the TX FIFO */
|
|
addr = i2c_8bit_addr_from_msg(msg);
|
|
writel(addr, iproc_i2c->base + M_TX_OFFSET);
|
|
|
|
/*
|
|
* For a write transaction, load data into the TX FIFO. Only allow
|
|
* loading up to TX FIFO size - 1 bytes of data since the first byte
|
|
* has been used up by the slave address
|
|
*/
|
|
tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1);
|
|
if (!(msg->flags & I2C_M_RD)) {
|
|
for (i = 0; i < tx_bytes; i++) {
|
|
val = msg->buf[i];
|
|
|
|
/* mark the last byte */
|
|
if (i == msg->len - 1)
|
|
val |= 1 << M_TX_WR_STATUS_SHIFT;
|
|
|
|
writel(val, iproc_i2c->base + M_TX_OFFSET);
|
|
}
|
|
iproc_i2c->tx_bytes = tx_bytes;
|
|
}
|
|
|
|
/* mark as incomplete before starting the transaction */
|
|
reinit_completion(&iproc_i2c->done);
|
|
iproc_i2c->xfer_is_done = 0;
|
|
|
|
/*
|
|
* Enable the "start busy" interrupt, which will be triggered after the
|
|
* transaction is done, i.e., the internal start_busy bit, transitions
|
|
* from 1 to 0.
|
|
*/
|
|
val = BIT(IE_M_START_BUSY_SHIFT);
|
|
|
|
/*
|
|
* If TX data size is larger than the TX FIFO, need to enable TX
|
|
* underrun interrupt, which will be triggerred when the TX FIFO is
|
|
* empty. When that happens we can then pump more data into the FIFO
|
|
*/
|
|
if (!(msg->flags & I2C_M_RD) &&
|
|
msg->len > iproc_i2c->tx_bytes)
|
|
val |= BIT(IE_M_TX_UNDERRUN_SHIFT);
|
|
|
|
writel(val, iproc_i2c->base + IE_OFFSET);
|
|
|
|
/*
|
|
* Now we can activate the transfer. For a read operation, specify the
|
|
* number of bytes to read
|
|
*/
|
|
val = BIT(M_CMD_START_BUSY_SHIFT);
|
|
if (msg->flags & I2C_M_RD) {
|
|
val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) |
|
|
(msg->len << M_CMD_RD_CNT_SHIFT);
|
|
} else {
|
|
val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
|
|
}
|
|
writel(val, iproc_i2c->base + M_CMD_OFFSET);
|
|
|
|
time_left = wait_for_completion_timeout(&iproc_i2c->done, time_left);
|
|
|
|
/* disable all interrupts */
|
|
writel(0, iproc_i2c->base + IE_OFFSET);
|
|
/* read it back to flush the write */
|
|
readl(iproc_i2c->base + IE_OFFSET);
|
|
|
|
/* make sure the interrupt handler isn't running */
|
|
synchronize_irq(iproc_i2c->irq);
|
|
|
|
if (!time_left && !iproc_i2c->xfer_is_done) {
|
|
dev_err(iproc_i2c->device, "transaction timed out\n");
|
|
|
|
/* flush FIFOs */
|
|
val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
|
|
(1 << M_FIFO_TX_FLUSH_SHIFT);
|
|
writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ret = bcm_iproc_i2c_check_status(iproc_i2c, msg);
|
|
if (ret) {
|
|
/* flush both TX/RX FIFOs */
|
|
val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
|
|
(1 << M_FIFO_TX_FLUSH_SHIFT);
|
|
writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* For a read operation, we now need to load the data from FIFO
|
|
* into the memory buffer
|
|
*/
|
|
if (msg->flags & I2C_M_RD) {
|
|
for (i = 0; i < msg->len; i++) {
|
|
msg->buf[i] = (readl(iproc_i2c->base + M_RX_OFFSET) >>
|
|
M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
|
|
int ret, i;
|
|
|
|
/* go through all messages */
|
|
for (i = 0; i < num; i++) {
|
|
ret = bcm_iproc_i2c_xfer_single_msg(iproc_i2c, &msgs[i]);
|
|
if (ret) {
|
|
dev_dbg(iproc_i2c->device, "xfer failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm bcm_iproc_algo = {
|
|
.master_xfer = bcm_iproc_i2c_xfer,
|
|
.functionality = bcm_iproc_i2c_functionality,
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
|
|
/* need to reserve one byte in the FIFO for the slave address */
|
|
.max_read_len = M_TX_RX_FIFO_SIZE - 1,
|
|
};
|
|
|
|
static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
|
|
{
|
|
unsigned int bus_speed;
|
|
u32 val;
|
|
int ret = of_property_read_u32(iproc_i2c->device->of_node,
|
|
"clock-frequency", &bus_speed);
|
|
if (ret < 0) {
|
|
dev_info(iproc_i2c->device,
|
|
"unable to interpret clock-frequency DT property\n");
|
|
bus_speed = 100000;
|
|
}
|
|
|
|
if (bus_speed < 100000) {
|
|
dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
|
|
bus_speed);
|
|
dev_err(iproc_i2c->device,
|
|
"valid speeds are 100khz and 400khz\n");
|
|
return -EINVAL;
|
|
} else if (bus_speed < 400000) {
|
|
bus_speed = 100000;
|
|
} else {
|
|
bus_speed = 400000;
|
|
}
|
|
|
|
iproc_i2c->bus_speed = bus_speed;
|
|
val = readl(iproc_i2c->base + TIM_CFG_OFFSET);
|
|
val &= ~(1 << TIM_CFG_MODE_400_SHIFT);
|
|
val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
|
|
writel(val, iproc_i2c->base + TIM_CFG_OFFSET);
|
|
|
|
dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_iproc_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
int irq, ret = 0;
|
|
struct bcm_iproc_i2c_dev *iproc_i2c;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
|
|
iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c),
|
|
GFP_KERNEL);
|
|
if (!iproc_i2c)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, iproc_i2c);
|
|
iproc_i2c->device = &pdev->dev;
|
|
init_completion(&iproc_i2c->done);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res);
|
|
if (IS_ERR(iproc_i2c->base))
|
|
return PTR_ERR(iproc_i2c->base);
|
|
|
|
ret = bcm_iproc_i2c_init(iproc_i2c);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(iproc_i2c->device, "no irq resource\n");
|
|
return irq;
|
|
}
|
|
iproc_i2c->irq = irq;
|
|
|
|
ret = devm_request_irq(iproc_i2c->device, irq, bcm_iproc_i2c_isr, 0,
|
|
pdev->name, iproc_i2c);
|
|
if (ret < 0) {
|
|
dev_err(iproc_i2c->device, "unable to request irq %i\n", irq);
|
|
return ret;
|
|
}
|
|
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
|
|
|
|
adap = &iproc_i2c->adapter;
|
|
i2c_set_adapdata(adap, iproc_i2c);
|
|
strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
|
|
adap->algo = &bcm_iproc_algo;
|
|
adap->quirks = &bcm_iproc_i2c_quirks;
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
|
|
return i2c_add_adapter(adap);
|
|
}
|
|
|
|
static int bcm_iproc_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
|
|
|
|
/* make sure there's no pending interrupt when we remove the adapter */
|
|
writel(0, iproc_i2c->base + IE_OFFSET);
|
|
readl(iproc_i2c->base + IE_OFFSET);
|
|
synchronize_irq(iproc_i2c->irq);
|
|
|
|
i2c_del_adapter(&iproc_i2c->adapter);
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int bcm_iproc_i2c_suspend(struct device *dev)
|
|
{
|
|
struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
|
|
|
|
/* make sure there's no pending interrupt when we go into suspend */
|
|
writel(0, iproc_i2c->base + IE_OFFSET);
|
|
readl(iproc_i2c->base + IE_OFFSET);
|
|
synchronize_irq(iproc_i2c->irq);
|
|
|
|
/* now disable the controller */
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_iproc_i2c_resume(struct device *dev)
|
|
{
|
|
struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
|
|
int ret;
|
|
u32 val;
|
|
|
|
/*
|
|
* Power domain could have been shut off completely in system deep
|
|
* sleep, so re-initialize the block here
|
|
*/
|
|
ret = bcm_iproc_i2c_init(iproc_i2c);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* configure to the desired bus speed */
|
|
val = readl(iproc_i2c->base + TIM_CFG_OFFSET);
|
|
val &= ~(1 << TIM_CFG_MODE_400_SHIFT);
|
|
val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
|
|
writel(val, iproc_i2c->base + TIM_CFG_OFFSET);
|
|
|
|
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = {
|
|
.suspend_late = &bcm_iproc_i2c_suspend,
|
|
.resume_early = &bcm_iproc_i2c_resume
|
|
};
|
|
|
|
#define BCM_IPROC_I2C_PM_OPS (&bcm_iproc_i2c_pm_ops)
|
|
#else
|
|
#define BCM_IPROC_I2C_PM_OPS NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct of_device_id bcm_iproc_i2c_of_match[] = {
|
|
{ .compatible = "brcm,iproc-i2c" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match);
|
|
|
|
static struct platform_driver bcm_iproc_i2c_driver = {
|
|
.driver = {
|
|
.name = "bcm-iproc-i2c",
|
|
.of_match_table = bcm_iproc_i2c_of_match,
|
|
.pm = BCM_IPROC_I2C_PM_OPS,
|
|
},
|
|
.probe = bcm_iproc_i2c_probe,
|
|
.remove = bcm_iproc_i2c_remove,
|
|
};
|
|
module_platform_driver(bcm_iproc_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom iProc I2C Driver");
|
|
MODULE_LICENSE("GPL v2");
|