3724 lines
120 KiB
C
Executable File
3724 lines
120 KiB
C
Executable File
/*
|
|
* sm5713_fuelgauge.c
|
|
* Samsung sm5713 Fuel Gauge Driver
|
|
*
|
|
* Copyright (C) 2015 Samsung Electronics
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/* #define BATTERY_LOG_MESSAGE */
|
|
#if defined(CONFIG_BATTERY_SAMSUNG_V2)
|
|
#include "include/sec_battery.h"
|
|
#else
|
|
#include <linux/battery/sec_battery.h>
|
|
#endif
|
|
#include <linux/mfd/sm5713-private.h>
|
|
#include "include/fuelgauge/sm5713_fuelgauge.h"
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
|
|
static enum power_supply_property sm5713_fuelgauge_props[] = {
|
|
};
|
|
|
|
static char *sm5713_fg_supplied_to[] = {
|
|
"sm5713-fuelgauge",
|
|
};
|
|
|
|
#define MINVAL(a, b) ((a <= b) ? a : b)
|
|
#define MAXVAL(a, b) ((a > b) ? a : b)
|
|
|
|
#define LIMIT_N_CURR_MIXFACTOR -2000
|
|
#define TABLE_READ_COUNT 2
|
|
#define FG_ABNORMAL_RESET -1
|
|
#define IGNORE_N_I_OFFSET 1
|
|
|
|
#define SM5713_FG_FULL_DEBUG 1
|
|
#define I2C_ERROR_COUNT_MAX 5
|
|
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
static int sm5713_get_full_chg_mq (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static void sm5713_set_full_chg_mq (struct sm5713_fuelgauge_data *fuelgauge, int mq);
|
|
static void sm5713_meas_mq_suspend (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static void sm5713_meas_mq_resume (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static void sm5713_meas_mq_start (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static int sm5713_meas_eq_dump (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static int sm5713_meas_mq_dump (struct sm5713_fuelgauge_data *fuelgauge);
|
|
static void sm5713_meas_mq_off (struct sm5713_fuelgauge_data *fuelgauge);
|
|
#endif
|
|
|
|
void sm5713_adabt_full_offset(struct sm5713_fuelgauge_data *fuelgauge);
|
|
static bool sm5713_fg_init(struct sm5713_fuelgauge_data *fuelgauge, bool is_surge);
|
|
|
|
|
|
|
|
static int sm5713_device_id = -1;
|
|
|
|
/* static unsigned int lpcharge = 0; */
|
|
|
|
enum sm5713_battery_table_type {
|
|
DISCHARGE_TABLE = 0,
|
|
SOC_TABLE,
|
|
TABLE_MAX,
|
|
};
|
|
|
|
bool sm5713_fg_fuelalert_init(struct sm5713_fuelgauge_data *fuelgauge,
|
|
int soc);
|
|
|
|
#if !defined(CONFIG_SEC_FACTORY)
|
|
static void sm5713_fg_periodic_read(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
static struct timespec old_ts = {0, };
|
|
struct timespec c_ts = {0, };
|
|
u8 reg;
|
|
int i;
|
|
int data[0x10];
|
|
char *str = NULL;
|
|
|
|
c_ts = ktime_to_timespec(ktime_get_boottime());
|
|
if ((unsigned long)(c_ts.tv_sec - old_ts.tv_sec) <= 180 && old_ts.tv_sec != 0) { /*3 min*/
|
|
pr_info("%s: skip old(%ld) current(%ld)\n", __func__, old_ts.tv_sec, c_ts.tv_sec);
|
|
return;
|
|
}
|
|
old_ts = c_ts;
|
|
|
|
str = kzalloc(sizeof(char)*1024, GFP_KERNEL);
|
|
if (!str)
|
|
return;
|
|
|
|
for (i = 0; i <= 0xB; i++) {
|
|
if (i == 7)
|
|
i = 8;
|
|
for (reg = 0; reg < 0x10; reg++) {
|
|
if ((i == 0) && ((reg == 0) || (reg == 2))) {
|
|
data[reg] = 0;
|
|
reg++;
|
|
}
|
|
data[reg] = sm5713_read_word(fuelgauge->i2c, reg + (i * 0x10));
|
|
if (data[reg] < 0) {
|
|
kfree(str);
|
|
return;
|
|
}
|
|
}
|
|
sprintf(str+strlen(str),
|
|
"%02x:%04x,%04x,%04x,%04x,%04x,%04x,%04x,%04x,",
|
|
i, data[0x00], data[0x01], data[0x02], data[0x03],
|
|
data[0x04], data[0x05], data[0x06], data[0x07]);
|
|
sprintf(str+strlen(str),
|
|
"%04x,%04x,%04x,%04x,%04x,%04x,%04x,%04x,",
|
|
data[0x08], data[0x09], data[0x0a], data[0x0b],
|
|
data[0x0c], data[0x0d], data[0x0e], data[0x0f]);
|
|
if (!fuelgauge->initial_update_of_soc) {
|
|
usleep_range(1000, 2000);
|
|
}
|
|
}
|
|
|
|
pr_info("[FG_ALL] %s", str);
|
|
pr_info("\n");
|
|
|
|
kfree(str);
|
|
}
|
|
#endif
|
|
|
|
static bool sm5713_fg_check_reg_init_need(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_OP_STATUS);
|
|
|
|
if ((ret & INIT_CHECK_MASK) == DISABLE_RE_INIT) {
|
|
pr_info("%s: SM5713_REG_FG_OP_STATUS : 0x%x , return FALSE NO init need\n", __func__, ret);
|
|
return 0;
|
|
} else {
|
|
pr_info("%s: SM5713_REG_FG_OP_STATUS : 0x%x , return TRUE init need!!!!\n", __func__, ret);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
void sm5713_cal_avg_vbat(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
if (fuelgauge->info.batt_avgvoltage == 0)
|
|
fuelgauge->info.batt_avgvoltage = fuelgauge->info.batt_voltage;
|
|
|
|
else if (fuelgauge->info.batt_voltage == 0 && fuelgauge->info.p_batt_voltage == 0)
|
|
fuelgauge->info.batt_avgvoltage = 3400;
|
|
|
|
else if (fuelgauge->info.batt_voltage == 0)
|
|
fuelgauge->info.batt_avgvoltage =
|
|
((fuelgauge->info.batt_avgvoltage) + (fuelgauge->info.p_batt_voltage))/2;
|
|
|
|
else if (fuelgauge->info.p_batt_voltage == 0)
|
|
fuelgauge->info.batt_avgvoltage =
|
|
((fuelgauge->info.batt_avgvoltage) + (fuelgauge->info.batt_voltage))/2;
|
|
|
|
else
|
|
fuelgauge->info.batt_avgvoltage =
|
|
((fuelgauge->info.batt_avgvoltage*2) +
|
|
(fuelgauge->info.p_batt_voltage+fuelgauge->info.batt_voltage))/4;
|
|
|
|
#ifdef SM5713_FG_FULL_DEBUG
|
|
pr_info("%s: batt_avgvoltage = %d\n", __func__, fuelgauge->info.batt_avgvoltage);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
|
|
void sm5713_voffset_cancel(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int volt_slope, mohm_volt_cal;
|
|
int fg_temp_gap = 0, volt_cal = 0, fg_delta_volcal = 0, pn_volt_slope = 0, volt_offset = 0;
|
|
|
|
if ((sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_STAT) & 0x02) ||
|
|
factory_mode) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL, fuelgauge->info.volt_cal[1]);
|
|
} else {
|
|
/*set vbat offset cancel start */
|
|
volt_slope = fuelgauge->info.volt_cal[0] & 0xFF00;
|
|
mohm_volt_cal = fuelgauge->info.volt_cal[0] & 0x00FF;
|
|
if (fuelgauge->info.enable_v_offset_cancel_p) {
|
|
if (fuelgauge->is_charging && (fuelgauge->info.batt_current > fuelgauge->info.v_offset_cancel_level)) {
|
|
if (mohm_volt_cal & 0x0080) {
|
|
mohm_volt_cal = -(mohm_volt_cal & 0x007F);
|
|
}
|
|
mohm_volt_cal = mohm_volt_cal - (fuelgauge->info.batt_current/(fuelgauge->info.v_offset_cancel_mohm * 13)); /* ((curr*0.001)*0.006)*2048 -> 6mohm */
|
|
if (mohm_volt_cal < 0) {
|
|
mohm_volt_cal = -mohm_volt_cal;
|
|
mohm_volt_cal = mohm_volt_cal|0x0080;
|
|
}
|
|
}
|
|
}
|
|
if (fuelgauge->info.enable_v_offset_cancel_n) {
|
|
if (!(fuelgauge->is_charging) && (fuelgauge->info.batt_current < -(fuelgauge->info.v_offset_cancel_level))) {
|
|
if (fuelgauge->info.volt_cal[0] & 0x0080) {
|
|
mohm_volt_cal = -(mohm_volt_cal & 0x007F);
|
|
}
|
|
mohm_volt_cal = mohm_volt_cal - (fuelgauge->info.batt_current/(fuelgauge->info.v_offset_cancel_mohm * 13)); /* ((curr*0.001)*0.006)*2048 -> 6mohm */
|
|
if (mohm_volt_cal < 0) {
|
|
mohm_volt_cal = -mohm_volt_cal;
|
|
mohm_volt_cal = mohm_volt_cal|0x0080;
|
|
}
|
|
}
|
|
}
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL, ((mohm_volt_cal & 0x00FF) | (volt_slope & 0xFF00)));
|
|
pr_info("%s: <%d %d %d %d> volt_cal = 0x%x, volt_slope = 0x%x, mohm_volt_cal = 0x%x\n",
|
|
__func__, fuelgauge->info.enable_v_offset_cancel_p, fuelgauge->info.enable_v_offset_cancel_n
|
|
, fuelgauge->info.v_offset_cancel_level, fuelgauge->info.v_offset_cancel_mohm
|
|
, fuelgauge->info.volt_cal[0], volt_slope, mohm_volt_cal);
|
|
/* set vbat offset cancel end */
|
|
|
|
fg_temp_gap = (fuelgauge->info.temp_fg/10) - fuelgauge->info.temp_std;
|
|
|
|
volt_cal = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL);
|
|
volt_offset = volt_cal & 0x00FF;
|
|
pn_volt_slope = fuelgauge->info.volt_cal[0] & 0xFF00;
|
|
|
|
if (fuelgauge->info.en_fg_temp_volcal) {
|
|
fg_delta_volcal = (fg_temp_gap / fuelgauge->info.fg_temp_volcal_denom)*fuelgauge->info.fg_temp_volcal_fact;
|
|
pn_volt_slope = pn_volt_slope + (fg_delta_volcal<<8);
|
|
volt_cal = pn_volt_slope | volt_offset;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL, volt_cal);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static unsigned int sm5713_get_vbat(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret = 0;
|
|
unsigned int vbat = 0; /* = 3500; 3500 means 3500mV*/
|
|
|
|
sm5713_voffset_cancel(fuelgauge);
|
|
|
|
if (fuelgauge->info.is_read_vpack)
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_VOLTAGE_CHGOUT);
|
|
else
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_VOLTAGE_VBAT);
|
|
|
|
if ((sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_STAT) & 0x0002) ||
|
|
factory_mode) {
|
|
if (fuelgauge->isjigmoderealvbat)
|
|
pr_info("%s : nENQ4 high JIG_ON, BUT need real VBAT \n", __func__, ret);
|
|
else {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_BAT_PTT1, 0x0109);
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_VOLTAGE_VSYS);
|
|
pr_info("%s : nENQ4 high JIG_ON, vsys register read result 0x%x\n", __func__, ret);
|
|
}
|
|
}
|
|
else {
|
|
if(sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_BAT_PTT1) != 0x0100) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_BAT_PTT1, 0x0100);
|
|
}
|
|
}
|
|
|
|
if (ret < 0) {
|
|
pr_err("%s: read vbat reg fail", __func__);
|
|
vbat = 4000;
|
|
} else {
|
|
vbat = ((ret&0x3fff)*1000)>>11;
|
|
}
|
|
fuelgauge->info.batt_voltage = vbat;
|
|
|
|
sm5713_cal_avg_vbat(fuelgauge);
|
|
|
|
if ((fuelgauge->vempty_mode == VEMPTY_MODE_SW_VALERT) &&
|
|
(vbat >= fuelgauge->battery_data->sw_v_empty_recover_vol)) {
|
|
fuelgauge->vempty_mode = VEMPTY_MODE_SW_RECOVERY;
|
|
|
|
sm5713_fg_fuelalert_init(fuelgauge,
|
|
fuelgauge->pdata->fuel_alert_soc);
|
|
pr_info("%s : Recoverd from SW V EMPTY Activation\n", __func__);
|
|
|
|
}
|
|
|
|
return vbat;
|
|
}
|
|
|
|
static unsigned int sm5713_get_ocv(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
unsigned int ocv; /* = 3500; *//*3500 means 3500mV*/
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_OCV);
|
|
if (ret < 0) {
|
|
pr_err("%s: read ocv reg fail\n", __func__);
|
|
ocv = 4000;
|
|
} else {
|
|
ocv = ((ret&0x7fff)*1000)>>11;
|
|
}
|
|
|
|
fuelgauge->info.batt_ocv = ocv;
|
|
|
|
return ocv;
|
|
}
|
|
|
|
void sm5713_cal_avg_current(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
if (fuelgauge->info.batt_avgcurrent == 0)
|
|
fuelgauge->info.batt_avgcurrent = fuelgauge->info.batt_current;
|
|
|
|
else if (fuelgauge->info.batt_avgcurrent == 0 && fuelgauge->info.p_batt_current == 0)
|
|
fuelgauge->info.batt_avgcurrent = fuelgauge->info.batt_current;
|
|
|
|
else if (fuelgauge->info.batt_current == 0)
|
|
fuelgauge->info.batt_avgcurrent =
|
|
((fuelgauge->info.batt_avgcurrent) + (fuelgauge->info.p_batt_current))/2;
|
|
|
|
else if (fuelgauge->info.p_batt_current == 0)
|
|
fuelgauge->info.batt_avgcurrent =
|
|
((fuelgauge->info.batt_avgcurrent) + (fuelgauge->info.batt_current))/2;
|
|
|
|
else
|
|
fuelgauge->info.batt_avgcurrent =
|
|
((fuelgauge->info.batt_avgcurrent*2) +
|
|
(fuelgauge->info.p_batt_current+fuelgauge->info.batt_current))/4;
|
|
|
|
return;
|
|
}
|
|
|
|
static int sm5713_get_curr(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
int curr = 0; /* = 1000; 1000 means 1000mA*/
|
|
|
|
#ifdef ENABLE_FULL_OFFSET
|
|
sm5713_adabt_full_offset(fuelgauge);
|
|
#endif
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_CURRENT);
|
|
if (ret < 0) {
|
|
pr_err("%s: read curr reg fail", __func__);
|
|
curr = 0;
|
|
} else {
|
|
curr = ((ret&0x3fff)*1000)>>11;
|
|
if (ret&0x8000) {
|
|
curr *= -1;
|
|
}
|
|
}
|
|
|
|
fuelgauge->info.batt_current = curr;
|
|
|
|
sm5713_cal_avg_current(fuelgauge);
|
|
|
|
return curr;
|
|
}
|
|
|
|
static int sm5713_get_temperature(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
int temp; /* = 250; 250 means 25.0oC*/
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TEMPERATURE);
|
|
if (ret < 0) {
|
|
pr_err("%s: read temp reg fail", __func__);
|
|
temp = 0;
|
|
} else {
|
|
temp = ((ret&0x7FF0)*10)>>8;
|
|
if (ret&0x8000) {
|
|
temp *= -1;
|
|
}
|
|
}
|
|
fuelgauge->info.temp_fg = temp;
|
|
|
|
return temp;
|
|
}
|
|
|
|
static int sm5713_get_cycle(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
int cycle;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_SOC_CYCLE);
|
|
if (ret < 0) {
|
|
pr_err("%s: read cycle reg fail", __func__);
|
|
cycle = 0;
|
|
} else {
|
|
cycle = ret&0x03FF;
|
|
}
|
|
fuelgauge->info.batt_soc_cycle = cycle;
|
|
|
|
return cycle;
|
|
}
|
|
|
|
static int sm5713_get_asoc(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ctrl, info, soh, pre_soh, h_flag, c_flag, delta_t, temp;
|
|
|
|
ctrl = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AGING_CTRL);
|
|
info = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AGING_INFO);
|
|
pre_soh = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_2);
|
|
c_flag = (sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_SOC_CYCLE) >> 4 ) % 2;
|
|
|
|
h_flag = (pre_soh & 0x80)>>7;
|
|
pre_soh = pre_soh & 0x7F;
|
|
pr_info("%s : asoc = %d, ctrl = 0x%x, info = 0x%x, pre = 0x%x, t = %d \n", __func__, fuelgauge->info.soh, ctrl, info, pre_soh, fuelgauge->info.temperature);
|
|
ctrl = ctrl & 0x0200;
|
|
if (ctrl != 0x0200) {
|
|
soh = pre_soh;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AGING_CTRL, fuelgauge->info.age_cntl);
|
|
} else {
|
|
info = info & 0x007F;
|
|
soh = ((info * 100) / 128) + 2;
|
|
}
|
|
|
|
if ((soh > 100) || (soh <= 10))
|
|
soh = 100;
|
|
|
|
if ((pre_soh > 100) || (pre_soh <= 10))
|
|
pre_soh = 100;
|
|
|
|
delta_t = fuelgauge->info.temperature/10 - fuelgauge->info.temp_std;
|
|
if (delta_t >= 0) {
|
|
if (soh < pre_soh) {
|
|
if (c_flag != h_flag) {
|
|
pre_soh = pre_soh-1;
|
|
temp = (c_flag<<7) | pre_soh;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_2, temp);
|
|
pr_info("%s : pre_soh update to %d, write 0x%x\n", __func__, pre_soh, temp);
|
|
}
|
|
}
|
|
}
|
|
soh = pre_soh;
|
|
|
|
fuelgauge->info.soh = soh;
|
|
|
|
return fuelgauge->info.soh;
|
|
}
|
|
|
|
|
|
static void sm5713_vbatocv_check(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
if ((abs(fuelgauge->info.batt_current) < 50) ||
|
|
((fuelgauge->is_charging) && (fuelgauge->info.batt_current < (fuelgauge->info.top_off)) &&
|
|
(fuelgauge->info.batt_current > (fuelgauge->info.top_off/3)) && (fuelgauge->info.batt_soc >= 900))) {
|
|
if (abs(fuelgauge->info.batt_ocv-fuelgauge->info.batt_voltage) > 30) { /* 30mV over */
|
|
fuelgauge->info.iocv_error_count++;
|
|
}
|
|
|
|
pr_info("%s: sm5713 FG iocv_error_count (%d)\n", __func__, fuelgauge->info.iocv_error_count);
|
|
|
|
if (fuelgauge->info.iocv_error_count > 5) /* prevent to overflow */
|
|
fuelgauge->info.iocv_error_count = 6;
|
|
} else {
|
|
fuelgauge->info.iocv_error_count = 0;
|
|
}
|
|
|
|
if (fuelgauge->info.iocv_error_count > 5) {
|
|
pr_info("%s: p_v - v = (%d)\n", __func__, fuelgauge->info.p_batt_voltage - fuelgauge->info.batt_voltage);
|
|
if (abs(fuelgauge->info.p_batt_voltage - fuelgauge->info.batt_voltage) > 15) { /* 15mV over */
|
|
fuelgauge->info.iocv_error_count = 0;
|
|
} else {
|
|
/* mode change to mix RS manual mode */
|
|
pr_info("%s: mode change to mix RS manual mode\n", __func__);
|
|
/* RS manual value write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[0]+5);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[0]-5);
|
|
}
|
|
} else {
|
|
/* voltage mode with 3.4V */
|
|
if (fuelgauge->vempty_mode != VEMPTY_MODE_HW) {
|
|
if ((fuelgauge->info.p_batt_voltage < fuelgauge->info.n_tem_poff) &&
|
|
(fuelgauge->info.batt_voltage < fuelgauge->info.n_tem_poff) && (!fuelgauge->is_charging)) {
|
|
pr_info("%s: mode change to normal tem mix RS manual mode\n", __func__);
|
|
/* mode change to mix RS manual mode */
|
|
/* RS manual value write */
|
|
if ((fuelgauge->info.p_batt_voltage <
|
|
(fuelgauge->info.n_tem_poff - fuelgauge->info.n_tem_poff_offset)) &&
|
|
(fuelgauge->info.batt_voltage <
|
|
(fuelgauge->info.n_tem_poff - fuelgauge->info.n_tem_poff_offset))) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, (fuelgauge->info.rs_value[0]>>1)+5);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, (fuelgauge->info.rs_value[0]>>1)-5);
|
|
} else {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[0]+5);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[0]-5);
|
|
}
|
|
} else {
|
|
pr_info("%s: mode change to mix RS auto mode\n", __func__);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[3]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[4]);
|
|
}
|
|
} else { /* voltage mode with 3.25V, VEMPTY_MODE_HW mode */
|
|
if ((fuelgauge->info.p_batt_voltage < fuelgauge->info.l_tem_poff) &&
|
|
(fuelgauge->info.batt_voltage < fuelgauge->info.l_tem_poff) && (!fuelgauge->is_charging)) {
|
|
pr_info("%s: mode change to normal tem mix RS manual mode\n", __func__);
|
|
/* mode change to mix RS manual mode */
|
|
/* RS manual value write */
|
|
if ((fuelgauge->info.p_batt_voltage <
|
|
(fuelgauge->info.l_tem_poff - fuelgauge->info.l_tem_poff_offset)) &&
|
|
(fuelgauge->info.batt_voltage <
|
|
(fuelgauge->info.l_tem_poff - fuelgauge->info.l_tem_poff_offset))) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, (fuelgauge->info.rs_value[0]>>1)+5);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, (fuelgauge->info.rs_value[0]>>1)-5);
|
|
} else {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[0]+5);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[0]-5);
|
|
}
|
|
} else {
|
|
pr_info("%s: mode change to mix RS auto mode\n", __func__);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[3]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[4]);
|
|
}
|
|
}
|
|
}
|
|
fuelgauge->info.p_batt_voltage = fuelgauge->info.batt_voltage;
|
|
fuelgauge->info.p_batt_current = fuelgauge->info.batt_current;
|
|
/* iocv error case cover end */
|
|
}
|
|
|
|
#ifdef ENABLE_FULL_OFFSET
|
|
void sm5713_adabt_full_offset(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int fg_temp_gap;
|
|
int full_offset, i_offset, sign_offset, curr;
|
|
int curr_off, sign_origin, i_origin;
|
|
int sign_curr, i_curr;
|
|
int aux_stat;
|
|
|
|
curr_off = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_OFF);
|
|
aux_stat = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_STAT);
|
|
pr_info("%s: curr_off=%x, aux_stat=%x, flag_charge_health=%d, flag_chg_status=%d, flag_full_charge=%d\n", __func__,
|
|
curr_off, aux_stat, fuelgauge->info.flag_charge_health, fuelgauge->info.flag_chg_status, fuelgauge->info.flag_full_charge);
|
|
|
|
if (fuelgauge->info.full_offset_enable > 0) {
|
|
if (((aux_stat & fuelgauge->info.aux_stat_base) == fuelgauge->info.aux_stat_check)
|
|
&& (fuelgauge->info.batt_avgcurrent < fuelgauge->info.full_offset_margin)
|
|
&& (fuelgauge->info.flag_chg_status == 0)) {
|
|
fg_temp_gap = (fuelgauge->info.temp_fg/10) - fuelgauge->info.temp_std;
|
|
if (abs(fg_temp_gap) < 10) {
|
|
curr = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_CURRENT);
|
|
sign_curr = curr & 0x8000;
|
|
i_curr = (curr & 0x7FFF)>>1;
|
|
if (sign_curr) {
|
|
i_curr = -i_curr;
|
|
}
|
|
|
|
curr_off = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_OFF);
|
|
sign_origin = curr_off & 0x0080;
|
|
i_origin = curr_off & 0x007F;
|
|
if (sign_origin) {
|
|
i_origin = -i_origin;
|
|
}
|
|
|
|
full_offset = i_origin - i_curr + fuelgauge->info.full_extra_offset;
|
|
if (full_offset < 0) {
|
|
i_offset = -full_offset;
|
|
sign_offset = 1;
|
|
} else {
|
|
i_offset = full_offset;
|
|
sign_offset = 0;
|
|
}
|
|
|
|
pr_info("%s: curr=%x, curr_off=%x, i_offset=%x, sign_offset=%d, full_offset_margin=%x, full_extra_offset=%x\n",
|
|
__func__, curr, curr_off, i_offset, sign_offset, fuelgauge->info.full_offset_margin, fuelgauge->info.full_extra_offset);
|
|
|
|
if (sign_offset == 1) {
|
|
full_offset = i_offset|0x0080;
|
|
}
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_EV_I_OFF, full_offset);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_OFF, full_offset);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSN_I_OFF, full_offset);
|
|
pr_info("%s: LAST i_offset=%x, sign_offset=%x, full_offset=%x\n", __func__, i_offset, sign_offset, full_offset);
|
|
}
|
|
} else {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_EV_I_OFF, fuelgauge->info.dp_ecv_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_OFF, fuelgauge->info.dp_csp_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSN_I_OFF, fuelgauge->info.dp_csn_i_off);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
static int sm5713_get_full_chg_mq (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int mq_raw, mq;
|
|
|
|
mq_raw = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1);
|
|
|
|
mq = ((mq_raw&0x7FFF) * 1000) >> 11;
|
|
|
|
pr_info("%s: raw = 0x%x, mq = %d\n", __func__, mq_raw, mq);
|
|
|
|
return mq;
|
|
}
|
|
|
|
static void sm5713_set_full_chg_mq (struct sm5713_fuelgauge_data *fuelgauge, int mq)
|
|
{
|
|
int mq_abs;
|
|
|
|
mq_abs = mq;
|
|
mq_abs = (mq_abs << 11)/1000;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1, mq_abs);
|
|
|
|
pr_info("%s: mq = %d, abs = 0x%x\n", __func__, mq, mq_abs);
|
|
}
|
|
|
|
static void sm5713_meas_mq_suspend (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret, suspend_mq;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2);
|
|
|
|
if ((ret & START_MQ) == START_MQ) {
|
|
suspend_mq = sm5713_meas_mq_dump(fuelgauge);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_START_MQ, ((suspend_mq<<11)/1000));
|
|
pr_info("%s: suspend mode mq is <0x%x>, AUX_2 : <0x%x> \n", __func__, suspend_mq, ret);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, 0);
|
|
} else {
|
|
pr_info("%s: AUX_2 : <0x%x> \n", __func__, ret);
|
|
}
|
|
}
|
|
|
|
static void sm5713_meas_mq_resume (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2);
|
|
pr_info("%s: SM5713_FG_REG_AUX_2 : <0x%x> \n", __func__, ret);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, START_MQ);
|
|
}
|
|
|
|
static void sm5713_meas_mq_start (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret, mq;
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2);
|
|
pr_info("%s: SM5713_FG_REG_AUX_2 : <0x%x> \n", __func__, ret);
|
|
|
|
if ((ret & START_MQ) != START_MQ) {
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_Q_MEAS_INIT);
|
|
if (ret == 0) {
|
|
mq = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_Q_EST);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_Q_MEAS_INIT, mq);
|
|
pr_info("%s: starting mq is <0x%x> \n", __func__, mq);
|
|
|
|
msleep(50);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, START_MQ);
|
|
|
|
/* full mq set */
|
|
sm5713_set_full_chg_mq(fuelgauge, ((fuelgauge->info.cap * 1000) >> 11));
|
|
} else {
|
|
pr_info("%s: read start mq is <0x%x> and resumed \n", __func__, ret);
|
|
sm5713_meas_mq_resume(fuelgauge);
|
|
}
|
|
} else {
|
|
pr_info("%s: sm5713_meas_mq_start already started : mq is <%d> \n", __func__, sm5713_meas_mq_dump(fuelgauge));
|
|
}
|
|
}
|
|
|
|
static int sm5713_meas_eq_dump (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret, eq;
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_Q_EST);
|
|
pr_info("%s: SM5713_FG_REG_Q_EST : <0x%x> \n", __func__, ret);
|
|
|
|
eq = ((ret&0x7FFF) * 1000) >> 11;
|
|
if (ret&0x8000) {
|
|
eq *= -1;
|
|
}
|
|
|
|
if (eq == 0) {
|
|
eq = (fuelgauge->info.cap * 1000) >> 11;
|
|
pr_info("%s: eq is 0, It's abnormal, return cap : %d\n", __func__, eq);
|
|
}
|
|
|
|
return eq;
|
|
}
|
|
|
|
static int sm5713_meas_mq_dump (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret, mq = 0, count = 0;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2);
|
|
|
|
if ((ret & START_MQ) == START_MQ) {
|
|
pr_info("%s: AUX_2 : <0x%x> \n", __func__, ret);
|
|
|
|
ret = START_MQ | DUMP_MQ;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, ret);
|
|
msleep(50);
|
|
ret = START_MQ;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, ret);
|
|
|
|
for (count = 0; count < 5; count++) {
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_Q_DUMP);
|
|
if (ret == 0) {
|
|
pr_info("%s: SM5713_FG_REG_MQ : <0x%x> retry %d\n", __func__, ret, count);
|
|
msleep(50);
|
|
} else {
|
|
pr_info("%s: SM5713_FG_REG_MQ : <0x%x> OK count = %d\n", __func__, ret, count);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret < 0) {
|
|
mq = ((fuelgauge->info.cap * 1000) >> 11);
|
|
pr_err("%s: sm5713_meas_mq_dump read fail!!!! return battery default value : %d\n", __func__, mq);
|
|
} else {
|
|
mq = ((ret&0x07FF) * 1000) >> 7;
|
|
if (ret&0x8000) {
|
|
mq *= -1;
|
|
}
|
|
}
|
|
|
|
if (mq == 0) {
|
|
mq = sm5713_meas_eq_dump(fuelgauge);
|
|
pr_info("%s: mq is 0, It's abnormal, return eq : %d\n", __func__, mq);
|
|
}
|
|
} else {
|
|
mq = ((fuelgauge->info.cap * 1000) >> 11);
|
|
pr_info("%s: sm5713_meas_mq not started : return battery default value : %d, AUX_2 : <0x%x>\n", __func__, mq, ret);
|
|
}
|
|
|
|
return mq;
|
|
}
|
|
|
|
static void sm5713_meas_mq_off (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int last_mq;
|
|
last_mq = sm5713_meas_mq_dump(fuelgauge);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_Q_MEAS_INIT, 0);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_2, 0);
|
|
|
|
pr_info("%s: mq off completed, last_mq : %d\n", __func__, last_mq);
|
|
}
|
|
|
|
#endif
|
|
|
|
static void sm5713_dp_setup (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_EV_I_OFF, fuelgauge->info.dp_ecv_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_OFF, fuelgauge->info.dp_csp_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSN_I_OFF, fuelgauge->info.dp_csn_i_off);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_EV_I_SLO, fuelgauge->info.dp_ecv_i_slo);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSP_I_SLO, fuelgauge->info.dp_csp_i_slo);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_CSN_I_SLO, fuelgauge->info.dp_csn_i_slo);
|
|
|
|
pr_info("%s: dp_off : <0x%x 0x%x 0x%x> dp_slo : <0x%x 0x%x 0x%x>\n",
|
|
__func__,
|
|
fuelgauge->info.dp_ecv_i_off, fuelgauge->info.dp_csp_i_off, fuelgauge->info.dp_csn_i_off,
|
|
fuelgauge->info.dp_ecv_i_slo, fuelgauge->info.dp_csp_i_slo, fuelgauge->info.dp_csn_i_slo);
|
|
}
|
|
|
|
static void sm5713_alg_setup (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_EV_I_OFF, fuelgauge->info.ecv_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSP_I_OFF, fuelgauge->info.csp_i_off);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSN_I_OFF, fuelgauge->info.csn_i_off);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_EV_I_SLO, fuelgauge->info.ecv_i_slo);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSP_I_SLO, fuelgauge->info.csp_i_slo);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSN_I_SLO, fuelgauge->info.csn_i_slo);
|
|
|
|
pr_info("%s: alg_off : <0x%x 0x%x 0x%x> alg_slo : <0x%x 0x%x 0x%x>\n",
|
|
__func__,
|
|
fuelgauge->info.ecv_i_off, fuelgauge->info.csp_i_off, fuelgauge->info.csn_i_off,
|
|
fuelgauge->info.ecv_i_slo, fuelgauge->info.csp_i_slo, fuelgauge->info.csn_i_slo);
|
|
}
|
|
|
|
static void sm5713_coeff_setup (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VSBC_VOLT_TEMP_CAL, fuelgauge->info.coeff);
|
|
}
|
|
|
|
static void sm5713_cal_carc (struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int curr_cal = 0, p_curr_cal = 0, n_curr_cal = 0, p_delta_cal = 0, n_delta_cal = 0, p_fg_delta_cal = 0, n_fg_delta_cal = 0, temp_curr_offset = 0;
|
|
int temp_gap, fg_temp_gap, mix_factor = 0;
|
|
|
|
sm5713_vbatocv_check(fuelgauge);
|
|
|
|
if (fuelgauge->is_charging || (fuelgauge->info.batt_current < LIMIT_N_CURR_MIXFACTOR)) {
|
|
mix_factor = fuelgauge->info.rs_value[1];
|
|
} else {
|
|
mix_factor = fuelgauge->info.rs_value[2];
|
|
}
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIX_FACTOR, mix_factor);
|
|
|
|
fg_temp_gap = (fuelgauge->info.temp_fg/10) - fuelgauge->info.temp_std;
|
|
|
|
|
|
temp_curr_offset = fuelgauge->info.ecv_i_off;
|
|
if (fuelgauge->info.en_high_fg_temp_offset && (fg_temp_gap > 0)) {
|
|
if (temp_curr_offset & 0x0080) {
|
|
temp_curr_offset = -(temp_curr_offset & 0x007F);
|
|
}
|
|
temp_curr_offset = temp_curr_offset + (fg_temp_gap / fuelgauge->info.high_fg_temp_offset_denom)*fuelgauge->info.high_fg_temp_offset_fact;
|
|
if (temp_curr_offset < 0) {
|
|
temp_curr_offset = -temp_curr_offset;
|
|
temp_curr_offset = temp_curr_offset|0x0080;
|
|
}
|
|
} else if (fuelgauge->info.en_low_fg_temp_offset && (fg_temp_gap < 0)) {
|
|
if (temp_curr_offset & 0x0080) {
|
|
temp_curr_offset = -(temp_curr_offset & 0x007F);
|
|
}
|
|
temp_curr_offset = temp_curr_offset + ((-fg_temp_gap) / fuelgauge->info.low_fg_temp_offset_denom)*fuelgauge->info.low_fg_temp_offset_fact;
|
|
if (temp_curr_offset < 0) {
|
|
temp_curr_offset = -temp_curr_offset;
|
|
temp_curr_offset = temp_curr_offset|0x0080;
|
|
}
|
|
}
|
|
temp_curr_offset = temp_curr_offset | (temp_curr_offset<<8);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_EV_I_OFF, temp_curr_offset);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSP_I_OFF, temp_curr_offset);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSN_I_OFF, temp_curr_offset);
|
|
|
|
n_curr_cal = (fuelgauge->info.ecv_i_slo & 0xFF00)>>8;
|
|
p_curr_cal = (fuelgauge->info.ecv_i_slo & 0x00FF);
|
|
|
|
if (fuelgauge->info.en_high_fg_temp_cal && (fg_temp_gap > 0)) {
|
|
p_fg_delta_cal = (fg_temp_gap / fuelgauge->info.high_fg_temp_p_cal_denom)*fuelgauge->info.high_fg_temp_p_cal_fact;
|
|
n_fg_delta_cal = (fg_temp_gap / fuelgauge->info.high_fg_temp_n_cal_denom)*fuelgauge->info.high_fg_temp_n_cal_fact;
|
|
} else if (fuelgauge->info.en_low_fg_temp_cal && (fg_temp_gap < 0)) {
|
|
fg_temp_gap = -fg_temp_gap;
|
|
p_fg_delta_cal = (fg_temp_gap / fuelgauge->info.low_fg_temp_p_cal_denom)*fuelgauge->info.low_fg_temp_p_cal_fact;
|
|
n_fg_delta_cal = (fg_temp_gap / fuelgauge->info.low_fg_temp_n_cal_denom)*fuelgauge->info.low_fg_temp_n_cal_fact;
|
|
}
|
|
p_curr_cal = p_curr_cal + (p_fg_delta_cal);
|
|
n_curr_cal = n_curr_cal + (n_fg_delta_cal);
|
|
|
|
pr_info("%s: <%d %d %d %d %d %d %d %d %d %d>, temp_fg = %d ,p_curr_cal = 0x%x, n_curr_cal = 0x%x, "
|
|
"batt_temp = %d\n",
|
|
__func__,
|
|
fuelgauge->info.en_high_fg_temp_cal,
|
|
fuelgauge->info.high_fg_temp_p_cal_denom, fuelgauge->info.high_fg_temp_p_cal_fact,
|
|
fuelgauge->info.high_fg_temp_n_cal_denom, fuelgauge->info.high_fg_temp_n_cal_fact,
|
|
fuelgauge->info.en_low_fg_temp_cal,
|
|
fuelgauge->info.low_fg_temp_p_cal_denom, fuelgauge->info.low_fg_temp_p_cal_fact,
|
|
fuelgauge->info.low_fg_temp_n_cal_denom, fuelgauge->info.low_fg_temp_n_cal_fact,
|
|
fuelgauge->info.temp_fg, p_curr_cal, n_curr_cal, fuelgauge->info.temperature);
|
|
|
|
temp_gap = (fuelgauge->info.temperature/10) - fuelgauge->info.temp_std;
|
|
if (fuelgauge->info.en_high_temp_cal && (temp_gap > 0)) {
|
|
p_delta_cal = (temp_gap / fuelgauge->info.high_temp_p_cal_denom)*fuelgauge->info.high_temp_p_cal_fact;
|
|
n_delta_cal = (temp_gap / fuelgauge->info.high_temp_n_cal_denom)*fuelgauge->info.high_temp_n_cal_fact;
|
|
} else if (fuelgauge->info.en_low_temp_cal && (temp_gap < 0)) {
|
|
temp_gap = -temp_gap;
|
|
p_delta_cal = (temp_gap / fuelgauge->info.low_temp_p_cal_denom)*fuelgauge->info.low_temp_p_cal_fact;
|
|
n_delta_cal = (temp_gap / fuelgauge->info.low_temp_n_cal_denom)*fuelgauge->info.low_temp_n_cal_fact;
|
|
}
|
|
p_curr_cal = p_curr_cal + (p_delta_cal);
|
|
n_curr_cal = n_curr_cal + (n_delta_cal);
|
|
|
|
curr_cal = (n_curr_cal << 8) | p_curr_cal;
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_EV_I_SLO, curr_cal);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSP_I_SLO, curr_cal);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CSN_I_SLO, curr_cal);
|
|
|
|
pr_info("%s: <%d %d %d %d %d %d %d %d %d %d>, "
|
|
"p_curr_cal = 0x%x, n_curr_cal = 0x%x, mix_factor=0x%x ,curr_cal = 0x%x\n",
|
|
__func__,
|
|
fuelgauge->info.en_high_temp_cal,
|
|
fuelgauge->info.high_temp_p_cal_denom, fuelgauge->info.high_temp_p_cal_fact,
|
|
fuelgauge->info.high_temp_n_cal_denom, fuelgauge->info.high_temp_n_cal_fact,
|
|
fuelgauge->info.en_low_temp_cal,
|
|
fuelgauge->info.low_temp_p_cal_denom, fuelgauge->info.low_temp_p_cal_fact,
|
|
fuelgauge->info.low_temp_n_cal_denom, fuelgauge->info.low_temp_n_cal_fact,
|
|
p_curr_cal, n_curr_cal, mix_factor, curr_cal);
|
|
|
|
return;
|
|
}
|
|
|
|
static int sm5713_fg_verified_write_word(struct i2c_client *client,
|
|
u8 reg_addr, u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = sm5713_write_word(client, reg_addr, data);
|
|
if (ret < 0) {
|
|
msleep(50);
|
|
pr_info("1st fail i2c write %s: ret = %d, addr = 0x%x, data = 0x%x\n",
|
|
__func__, ret, reg_addr, data);
|
|
ret = sm5713_write_word(client, reg_addr, data);
|
|
if (ret < 0) {
|
|
msleep(50);
|
|
pr_info("2nd fail i2c write %s: ret = %d, addr = 0x%x, data = 0x%x\n",
|
|
__func__, ret, reg_addr, data);
|
|
ret = sm5713_write_word(client, reg_addr, data);
|
|
if (ret < 0) {
|
|
pr_info("3rd fail i2c write %s: ret = %d, addr = 0x%x, data = 0x%x\n",
|
|
__func__, ret, reg_addr, data);
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5713_fg_fs_read_word_table(struct i2c_client *client,
|
|
u8 reg_addr, u8 count)
|
|
{
|
|
int ret, i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
ret = sm5713_read_word(client, reg_addr);
|
|
if (ret < 0) {
|
|
pr_err("%s: 1st fail i2c write ret = %d, addr = 0x%x\n, count = %d",
|
|
__func__, ret, reg_addr, count);
|
|
} else {
|
|
if (ret == 0xffff)
|
|
ret = sm5713_read_word(client, reg_addr);
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int sm5713_fg_calculate_iocv(struct sm5713_fuelgauge_data *fuelgauge, bool is_vsys)
|
|
{
|
|
bool only_lb = false, sign_i_offset = 0; /*valid_cb=false, */
|
|
int roop_start = 0, roop_max = 0, i = 0, cb_last_index = 0, cb_pre_last_index = 0;
|
|
int lb_v_buffer[FG_INIT_B_LEN+1] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
int lb_i_buffer[FG_INIT_B_LEN+1] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
int cb_v_buffer[FG_INIT_B_LEN+1] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
int cb_i_buffer[FG_INIT_B_LEN+1] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
int i_offset_margin = 0x14, i_vset_margin = 0x67;
|
|
int v_max = 0, v_min = 0, v_sum = 0, lb_v_avg = 0, cb_v_avg = 0, lb_v_set = 0, lb_i_set = 0, i_offset = 0; /* lb_v_minmax_offset=0, */
|
|
int i_max = 0, i_min = 0, i_sum = 0, lb_i_avg = 0, cb_i_avg = 0, cb_v_set = 0, cb_i_set = 0; /* lb_i_minmax_offset=0, */
|
|
int lb_i_p_v_min = 0, lb_i_n_v_max = 0, cb_i_p_v_min = 0, cb_i_n_v_max = 0;
|
|
|
|
int v_ret = 0, i_ret = 0, ret = 0;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_END_V_IDX);
|
|
pr_info("%s: iocv_status_read = addr : 0x%x , data : 0x%x\n", __func__, SM5713_FG_REG_END_V_IDX, ret);
|
|
|
|
/* init start */
|
|
if ((ret & 0x0010) == 0x0000) {
|
|
only_lb = true;
|
|
}
|
|
|
|
/*
|
|
if ((ret & 0x0300) == 0x0300) {
|
|
valid_cb = true;
|
|
}
|
|
*/
|
|
/* init end */
|
|
|
|
/* lb get start */
|
|
roop_max = (ret & 0x000F);
|
|
if (roop_max > FG_INIT_B_LEN)
|
|
roop_max = FG_INIT_B_LEN;
|
|
|
|
roop_start = SM5713_FG_REG_START_LB_V;
|
|
for (i = roop_start; i < roop_start + roop_max; i++) {
|
|
if (is_vsys)
|
|
v_ret = sm5713_read_word(fuelgauge->i2c, i+0x10);
|
|
else
|
|
v_ret = sm5713_read_word(fuelgauge->i2c, i);
|
|
i_ret = sm5713_read_word(fuelgauge->i2c, i+0x20);
|
|
|
|
if ((i_ret&0x4000) == 0x4000) {
|
|
i_ret = -(i_ret&0x3FFF);
|
|
}
|
|
|
|
lb_v_buffer[i-roop_start] = v_ret;
|
|
lb_i_buffer[i-roop_start] = i_ret;
|
|
|
|
if (i == roop_start) {
|
|
v_max = v_ret;
|
|
v_min = v_ret;
|
|
v_sum = v_ret;
|
|
i_max = i_ret;
|
|
i_min = i_ret;
|
|
i_sum = i_ret;
|
|
} else {
|
|
if (v_ret > v_max)
|
|
v_max = v_ret;
|
|
else if (v_ret < v_min)
|
|
v_min = v_ret;
|
|
v_sum = v_sum + v_ret;
|
|
|
|
if (i_ret > i_max)
|
|
i_max = i_ret;
|
|
else if (i_ret < i_min)
|
|
i_min = i_ret;
|
|
i_sum = i_sum + i_ret;
|
|
}
|
|
|
|
if (abs(i_ret) > i_vset_margin) {
|
|
if (i_ret > 0) {
|
|
if (lb_i_p_v_min == 0) {
|
|
lb_i_p_v_min = v_ret;
|
|
} else {
|
|
if (v_ret < lb_i_p_v_min)
|
|
lb_i_p_v_min = v_ret;
|
|
}
|
|
} else {
|
|
if (lb_i_n_v_max == 0) {
|
|
lb_i_n_v_max = v_ret;
|
|
} else {
|
|
if (v_ret > lb_i_n_v_max)
|
|
lb_i_n_v_max = v_ret;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
v_sum = v_sum - v_max - v_min;
|
|
i_sum = i_sum - i_max - i_min;
|
|
|
|
/*
|
|
lb_v_minmax_offset = v_max - v_min;
|
|
lb_i_minmax_offset = i_max - i_min;
|
|
*/
|
|
|
|
lb_v_avg = v_sum / (roop_max-2);
|
|
lb_i_avg = i_sum / (roop_max-2);
|
|
/* lb get end */
|
|
|
|
/* lb_vset start */
|
|
if (abs(lb_i_buffer[roop_max-1]) < i_vset_margin) {
|
|
if (abs(lb_i_buffer[roop_max-2]) < i_vset_margin) {
|
|
lb_v_set = MAXVAL(lb_v_buffer[roop_max-2], lb_v_buffer[roop_max-1]);
|
|
if (abs(lb_i_buffer[roop_max-3]) < i_vset_margin) {
|
|
lb_v_set = MAXVAL(lb_v_buffer[roop_max-3], lb_v_set);
|
|
}
|
|
} else {
|
|
lb_v_set = lb_v_buffer[roop_max-1];
|
|
}
|
|
} else {
|
|
lb_v_set = lb_v_avg;
|
|
}
|
|
|
|
if (lb_i_n_v_max > 0) {
|
|
lb_v_set = MAXVAL(lb_i_n_v_max, lb_v_set);
|
|
}
|
|
/*
|
|
else if (lb_i_p_v_min > 0) {
|
|
lb_v_set = MINVAL(lb_i_p_v_min, lb_v_set);
|
|
}
|
|
lb_vset end
|
|
|
|
lb offset make start
|
|
*/
|
|
if (roop_max > 3) {
|
|
lb_i_set = (lb_i_buffer[2] + lb_i_buffer[3]) / 2;
|
|
}
|
|
|
|
if ((abs(lb_i_buffer[roop_max-1]) < i_offset_margin) && (abs(lb_i_set) < i_offset_margin)) {
|
|
lb_i_set = MAXVAL(lb_i_buffer[roop_max-1], lb_i_set);
|
|
} else if (abs(lb_i_buffer[roop_max-1]) < i_offset_margin) {
|
|
lb_i_set = lb_i_buffer[roop_max-1];
|
|
} else if (abs(lb_i_set) < i_offset_margin) {
|
|
i_offset = lb_i_set;
|
|
} else {
|
|
lb_i_set = 0;
|
|
}
|
|
|
|
i_offset = lb_i_set;
|
|
|
|
i_offset = i_offset + 4; /* add extra offset */
|
|
|
|
if (i_offset <= 0) {
|
|
sign_i_offset = 1;
|
|
#ifdef IGNORE_N_I_OFFSET
|
|
i_offset = 0;
|
|
#else
|
|
i_offset = -i_offset;
|
|
#endif
|
|
}
|
|
|
|
i_offset = i_offset>>1;
|
|
|
|
if (sign_i_offset == 0) {
|
|
i_offset = i_offset|0x0080;
|
|
}
|
|
i_offset = i_offset | i_offset<<8;
|
|
/*
|
|
do not write in kernel point.
|
|
sm5713_write_word(client, SM5713_FG_REG_DP_ECV_I_OFF, i_offset);
|
|
lb offset make end
|
|
*/
|
|
pr_info("%s: iocv_l_max=0x%x, iocv_l_min=0x%x, iocv_l_avg=0x%x, lb_v_set=0x%x, roop_max=%d \n",
|
|
__func__, v_max, v_min, lb_v_avg, lb_v_set, roop_max);
|
|
pr_info("%s: ioci_l_max=0x%x, ioci_l_min=0x%x, ioci_l_avg=0x%x, lb_i_set=0x%x, i_offset=0x%x, sign_i_offset=%d\n",
|
|
__func__, i_max, i_min, lb_i_avg, lb_i_set, i_offset, sign_i_offset);
|
|
|
|
if (!only_lb) {
|
|
/* cb get start */
|
|
roop_start = SM5713_FG_REG_START_CB_V;
|
|
roop_max = 6;
|
|
for (i = roop_start; i < roop_start + roop_max; i++) {
|
|
|
|
if (is_vsys)
|
|
v_ret = sm5713_read_word(fuelgauge->i2c, i+0x10);
|
|
else
|
|
v_ret = sm5713_read_word(fuelgauge->i2c, i);
|
|
i_ret = sm5713_read_word(fuelgauge->i2c, i+0x20);
|
|
|
|
if ((i_ret&0x4000) == 0x4000) {
|
|
i_ret = -(i_ret&0x3FFF);
|
|
}
|
|
|
|
cb_v_buffer[i-roop_start] = v_ret;
|
|
cb_i_buffer[i-roop_start] = i_ret;
|
|
|
|
if (i == roop_start) {
|
|
v_max = v_ret;
|
|
v_min = v_ret;
|
|
v_sum = v_ret;
|
|
i_max = i_ret;
|
|
i_min = i_ret;
|
|
i_sum = i_ret;
|
|
} else {
|
|
if (v_ret > v_max)
|
|
v_max = v_ret;
|
|
else if (v_ret < v_min)
|
|
v_min = v_ret;
|
|
v_sum = v_sum + v_ret;
|
|
|
|
if (i_ret > i_max)
|
|
i_max = i_ret;
|
|
else if (i_ret < i_min)
|
|
i_min = i_ret;
|
|
i_sum = i_sum + i_ret;
|
|
}
|
|
|
|
if (abs(i_ret) > i_vset_margin) {
|
|
if (i_ret > 0) {
|
|
if (cb_i_p_v_min == 0) {
|
|
cb_i_p_v_min = v_ret;
|
|
} else {
|
|
if (v_ret < cb_i_p_v_min)
|
|
cb_i_p_v_min = v_ret;
|
|
}
|
|
} else {
|
|
if (cb_i_n_v_max == 0) {
|
|
cb_i_n_v_max = v_ret;
|
|
} else {
|
|
if (v_ret > cb_i_n_v_max)
|
|
cb_i_n_v_max = v_ret;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
v_sum = v_sum - v_max - v_min;
|
|
i_sum = i_sum - i_max - i_min;
|
|
|
|
cb_v_avg = v_sum / (roop_max-2);
|
|
cb_i_avg = i_sum / (roop_max-2);
|
|
/* cb get end */
|
|
|
|
/* cb_vset start */
|
|
cb_last_index = (ret & 0x000F)-7; /*-6-1 */
|
|
if (cb_last_index < 0) {
|
|
cb_last_index = 5;
|
|
}
|
|
|
|
for (i = roop_max; i > 0; i--) {
|
|
if (abs(cb_i_buffer[cb_last_index]) < i_vset_margin) {
|
|
cb_v_set = cb_v_buffer[cb_last_index];
|
|
if (abs(cb_i_buffer[cb_last_index]) < i_offset_margin) {
|
|
cb_i_set = cb_i_buffer[cb_last_index];
|
|
}
|
|
|
|
cb_pre_last_index = cb_last_index - 1;
|
|
if (cb_pre_last_index < 0) {
|
|
cb_pre_last_index = 5;
|
|
}
|
|
|
|
if (abs(cb_i_buffer[cb_pre_last_index]) < i_vset_margin) {
|
|
cb_v_set = MAXVAL(cb_v_buffer[cb_pre_last_index], cb_v_set);
|
|
if (abs(cb_i_buffer[cb_pre_last_index]) < i_offset_margin) {
|
|
cb_i_set = MAXVAL(cb_i_buffer[cb_pre_last_index], cb_i_set);
|
|
}
|
|
}
|
|
} else {
|
|
cb_last_index--;
|
|
if (cb_last_index < 0) {
|
|
cb_last_index = 5;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (cb_v_set == 0) {
|
|
cb_v_set = cb_v_avg;
|
|
if (cb_i_set == 0) {
|
|
cb_i_set = cb_i_avg;
|
|
}
|
|
}
|
|
|
|
if (cb_i_n_v_max > 0) {
|
|
cb_v_set = MAXVAL(cb_i_n_v_max, cb_v_set);
|
|
}
|
|
/*
|
|
else if(cb_i_p_v_min > 0) {
|
|
cb_v_set = MINVAL(cb_i_p_v_min, cb_v_set);
|
|
}
|
|
cb_vset end
|
|
|
|
cb offset make start
|
|
*/
|
|
if (abs(cb_i_set) < i_offset_margin) {
|
|
if (cb_i_set > lb_i_set) {
|
|
i_offset = cb_i_set;
|
|
i_offset = i_offset + 4; /* add extra offset */
|
|
|
|
if (i_offset <= 0) {
|
|
sign_i_offset = 1;
|
|
#ifdef IGNORE_N_I_OFFSET
|
|
i_offset = 0;
|
|
#else
|
|
i_offset = -i_offset;
|
|
#endif
|
|
}
|
|
|
|
i_offset = i_offset>>1;
|
|
|
|
if (sign_i_offset == 0) {
|
|
i_offset = i_offset|0x0080;
|
|
}
|
|
i_offset = i_offset | i_offset<<8;
|
|
|
|
/* do not write in kernel point. */
|
|
/* sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DP_ECV_I_OFF, i_offset); */
|
|
}
|
|
}
|
|
/* cb offset make end */
|
|
|
|
pr_info("%s: iocv_c_max=0x%x, iocv_c_min=0x%x, iocv_c_avg=0x%x, cb_v_set=0x%x, cb_last_index=%d, is_vsys=%d \n",
|
|
__func__, v_max, v_min, cb_v_avg, cb_v_set, cb_last_index, is_vsys);
|
|
pr_info("%s: ioci_c_max=0x%x, ioci_c_min=0x%x, ioci_c_avg=0x%x, cb_i_set=0x%x, i_offset=0x%x, sign_i_offset=%d\n",
|
|
__func__, i_max, i_min, cb_i_avg, cb_i_set, i_offset, sign_i_offset);
|
|
|
|
}
|
|
|
|
/* final set */
|
|
if ((abs(cb_i_set) > i_vset_margin) || only_lb) {
|
|
ret = MAXVAL(lb_v_set, cb_i_n_v_max);
|
|
} else {
|
|
ret = cb_v_set;
|
|
}
|
|
|
|
if (ret > fuelgauge->info.battery_table[DISCHARGE_TABLE][FG_TABLE_LEN-1]) {
|
|
pr_info("%s: iocv ret change 0x%x -> 0x%x \n", __func__, ret, fuelgauge->info.battery_table[DISCHARGE_TABLE][FG_TABLE_LEN-1]);
|
|
ret = fuelgauge->info.battery_table[DISCHARGE_TABLE][FG_TABLE_LEN-1];
|
|
} else if (ret < fuelgauge->info.battery_table[DISCHARGE_TABLE][0]) {
|
|
pr_info("%s: iocv ret change 0x%x -> 0x%x \n", __func__, ret, (fuelgauge->info.battery_table[DISCHARGE_TABLE][0] + 0x10));
|
|
ret = fuelgauge->info.battery_table[DISCHARGE_TABLE][0] + 0x10;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
void sm5713_set_cycle_cfg(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int value;
|
|
|
|
value = fuelgauge->info.cycle_limit_cntl|(fuelgauge->info.cycle_high_limit<<12)|(fuelgauge->info.cycle_low_limit<<8);
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_SOC_CYCLE_CFG, value);
|
|
|
|
pr_info("%s: cycle cfg value = 0x%x\n", __func__, value);
|
|
|
|
}
|
|
|
|
void sm5713_set_arsm_cfg(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int value;
|
|
|
|
value = fuelgauge->info.arsm[0]<<15 | fuelgauge->info.arsm[1]<<6 | fuelgauge->info.arsm[2]<<4 | fuelgauge->info.arsm[3];
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUTO_RS_MAN, value);
|
|
|
|
pr_info("%s: arsm cfg value = 0x%x\n", __func__, value);
|
|
}
|
|
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
int get_v_max_index_by_cycle(struct sm5713_fuelgauge_data *fuelgauge)
|
|
|
|
{
|
|
int cycle_index = 0, len;
|
|
|
|
for (len = fuelgauge->pdata->num_age_step-1; len >= 0; --len) {
|
|
if (fuelgauge->chg_full_soc == fuelgauge->pdata->age_data[len].full_condition_soc) {
|
|
cycle_index = len;
|
|
break;
|
|
}
|
|
}
|
|
pr_info("%s: chg_full_soc = %d, index = %d \n", __func__, fuelgauge->chg_full_soc, cycle_index);
|
|
|
|
return cycle_index;
|
|
}
|
|
#endif
|
|
|
|
|
|
static bool sm5713_fg_reg_init(struct sm5713_fuelgauge_data *fuelgauge, bool is_surge)
|
|
{
|
|
int i, j, k, value, ret = 0;
|
|
uint8_t table_reg;
|
|
int write_table[TABLE_MAX][FG_TABLE_LEN+1];
|
|
int error_remain = 0, error_check = 0;
|
|
|
|
pr_info("%s: sm5713_fg_reg_init START!!\n", __func__);
|
|
|
|
/* init mark */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RESET, FG_INIT_MARK);
|
|
|
|
/* start first param_ctrl unlock */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_PARAM_CTRL, FG_PARAM_UNLOCK_CODE);
|
|
|
|
/* RCE write */
|
|
for (i = 0; i < 3; i++) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RCE0+i, fuelgauge->info.rce_value[i]);
|
|
pr_info("%s: RCE write RCE%d = 0x%x : 0x%x\n",
|
|
__func__, i, SM5713_FG_REG_RCE0+i, fuelgauge->info.rce_value[i]);
|
|
}
|
|
|
|
/* DTCD write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_DTCD, fuelgauge->info.dtcd_value);
|
|
pr_info("%s: DTCD write DTCD = 0x%x : 0x%x\n",
|
|
__func__, SM5713_FG_REG_DTCD, fuelgauge->info.dtcd_value);
|
|
|
|
/* RS write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAN, fuelgauge->info.rs_value[0]);
|
|
pr_info("%s: RS write RS = 0x%x : 0x%x\n",
|
|
__func__, SM5713_FG_REG_AUTO_RS_MAN, fuelgauge->info.rs_value[0]);
|
|
|
|
/* VIT_PERIOD write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VIT_PERIOD, fuelgauge->info.vit_period);
|
|
pr_info("%s: VIT_PERIOD write VIT_PERIOD = 0x%x : 0x%x\n",
|
|
__func__, SM5713_FG_REG_VIT_PERIOD, fuelgauge->info.vit_period);
|
|
|
|
/* TABLE_LEN write & pram unlock */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_PARAM_CTRL,
|
|
FG_PARAM_UNLOCK_CODE | FG_TABLE_LEN);
|
|
/* CAP write */
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
i = get_v_max_index_by_cycle(fuelgauge);
|
|
pr_info("%s: v_max_now is change %x -> %x \n", __func__, fuelgauge->info.v_max_now, fuelgauge->info.v_max_table[i]);
|
|
pr_info("%s: q_max_now is change %x -> %x \n", __func__, fuelgauge->info.q_max_now, fuelgauge->info.q_max_table[i]);
|
|
fuelgauge->info.v_max_now = fuelgauge->info.v_max_table[i];
|
|
fuelgauge->info.q_max_now = fuelgauge->info.q_max_table[i];
|
|
fuelgauge->info.cap = fuelgauge->info.q_max_now;
|
|
#endif
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_BAT_CAP, fuelgauge->info.cap);
|
|
pr_info("%s: SM5713_REG_CAP 0x%x, 0x%x\n",
|
|
__func__, fuelgauge->info.min_cap, fuelgauge->info.cap);
|
|
|
|
for (i = 0; i < TABLE_MAX; i++) {
|
|
for (j = 0; j <= FG_TABLE_LEN; j++) {
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
if (i == SOC_TABLE) {
|
|
write_table[i][j] = (fuelgauge->info.battery_table[i][j] * 2) - (fuelgauge->info.battery_table[i][j] * fuelgauge->info.q_max_now / fuelgauge->info.maxcap);
|
|
if (j == FG_TABLE_LEN) {
|
|
write_table[i][FG_TABLE_LEN-1] = 100*256;
|
|
write_table[i][FG_TABLE_LEN] = 100*256+26;
|
|
}
|
|
} else {
|
|
write_table[i][j] = fuelgauge->info.battery_table[i][j];
|
|
if (j == FG_TABLE_LEN-1){
|
|
write_table[i][FG_TABLE_LEN-1] = fuelgauge->info.v_max_now;
|
|
if (write_table[i][FG_TABLE_LEN-1] < write_table[i][FG_TABLE_LEN-2]) {
|
|
write_table[i][FG_TABLE_LEN-2] = write_table[i][FG_TABLE_LEN-1] - 0x18; // ~11.7mV
|
|
write_table[SOC_TABLE][FG_TABLE_LEN-2] = (write_table[SOC_TABLE][FG_TABLE_LEN-1]*99)/100;
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
write_table[i][j] = fuelgauge->info.battery_table[i][j];
|
|
#endif
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < TABLE_MAX; i++) {
|
|
table_reg = SM5713_FG_REG_TABLE_0_START + (i*(FG_TABLE_LEN+1));
|
|
for (j = 0; j <= FG_TABLE_LEN; j++) {
|
|
sm5713_write_word(fuelgauge->i2c, (table_reg + j), write_table[i][j]);
|
|
msleep(10);
|
|
value = sm5713_fg_fs_read_word_table(fuelgauge->i2c,
|
|
(table_reg + j), TABLE_READ_COUNT);
|
|
if (write_table[i][j] == value) {
|
|
pr_info("%s: TABLE write and verify OK [%d][%d] = 0x%x : 0x%x\n",
|
|
__func__, i, j, (table_reg + j), write_table[i][j]);
|
|
} else {
|
|
error_check = 1;
|
|
|
|
for (k = 1; k <= I2C_ERROR_COUNT_MAX; k++) {
|
|
pr_info("%s: TABLE write data ERROR!!!! rewrite [%d][%d] = 0x%x : 0x%x, count=%d\n",
|
|
__func__, i, j, (table_reg + j), write_table[i][j], k);
|
|
sm5713_write_word(fuelgauge->i2c, (table_reg + j), write_table[i][j]);
|
|
msleep(30);
|
|
value = sm5713_fg_fs_read_word_table(fuelgauge->i2c,
|
|
(table_reg + j), TABLE_READ_COUNT);
|
|
if (write_table[i][j] == value) {
|
|
pr_info("%s: TABLE rewrite OK [%d][%d] = 0x%x : 0x%x, count=%d\n",
|
|
__func__, i, j, (table_reg + j), write_table[i][j], k);
|
|
break;
|
|
}
|
|
|
|
if (k == I2C_ERROR_COUNT_MAX)
|
|
error_remain = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
table_reg = SM5713_FG_REG_TABLE_2_START;
|
|
for (j = 0; j <= FG_ADD_TABLE_LEN; j++) {
|
|
sm5713_write_word(fuelgauge->i2c, (table_reg + j), fuelgauge->info.battery_table[i][j]);
|
|
pr_info("%s: TABLE write OK [%d][%d] = 0x%x : 0x%x\n",
|
|
__func__, i, j, (table_reg + j), fuelgauge->info.battery_table[i][j]);
|
|
}
|
|
|
|
/* MIX_MODE write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIX_FACTOR, fuelgauge->info.rs_value[2]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MAX, fuelgauge->info.rs_value[3]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_RS_MIN, fuelgauge->info.rs_value[4]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MIX_RATE, fuelgauge->info.mix_value[0]);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MIX_INIT_BLANK, fuelgauge->info.mix_value[1]);
|
|
|
|
pr_info("%s: RS_MIX_FACTOR = 0x%x, RS_MAX = 0x%x, RS_MIN = 0x%x, MIX_RATE = 0x%x, MIX_INIT_BLANK = 0x%x\n",
|
|
__func__,
|
|
fuelgauge->info.rs_value[2], fuelgauge->info.rs_value[3], fuelgauge->info.rs_value[4],
|
|
fuelgauge->info.mix_value[0], fuelgauge->info.mix_value[1]);
|
|
|
|
/* v_cal write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL, fuelgauge->info.volt_cal[0]);
|
|
/* need writing value print for debug */
|
|
|
|
/* MISC write */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MISC, fuelgauge->info.misc);
|
|
pr_info("%s: SM5713_REG_MISC 0x%x : 0x%x\n",
|
|
__func__, SM5713_FG_REG_MISC, fuelgauge->info.misc);
|
|
|
|
/* TOPOFF SOC */
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_TOPOFF_SOC, fuelgauge->info.topoff_soc);
|
|
pr_info("%s: SM5713_REG_TOPOFF_SOC 0x%x : 0x%x\n", __func__,
|
|
SM5713_FG_REG_TOPOFF_SOC, fuelgauge->info.topoff_soc);
|
|
|
|
/* INIT_last - control register set */
|
|
value = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_CNTL);
|
|
if (value == CNTL_REG_DEFAULT_VALUE) {
|
|
value = fuelgauge->info.cntl_value;
|
|
}
|
|
value = ENABLE_MIX_MODE | ENABLE_TEMP_MEASURE | ENABLE_MANUAL_OCV | (fuelgauge->info.enable_topoff_soc << 13);
|
|
pr_info("%s: SM5713_REG_CNTL reg : 0x%x\n", __func__, value);
|
|
|
|
ret = sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CNTL, value);
|
|
if (ret < 0)
|
|
pr_info("%s: fail control register set(%d)\n", __func__, ret);
|
|
|
|
pr_info("%s: LAST SM5713_REG_CNTL = 0x%x : 0x%x\n", __func__, SM5713_FG_REG_CNTL, value);
|
|
|
|
/* LOCK */
|
|
value = FG_PARAM_LOCK_CODE | FG_TABLE_LEN;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_PARAM_CTRL, value);
|
|
pr_info("%s: LAST PARAM CTRL VALUE = 0x%x : 0x%x\n", __func__, SM5713_FG_REG_PARAM_CTRL, value);
|
|
|
|
/* surge reset defence */
|
|
if (is_surge) {
|
|
value = ((fuelgauge->info.batt_ocv<<8)/125);
|
|
} else {
|
|
if ((sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_STAT) & 0x0002) ||
|
|
factory_mode) {
|
|
value = sm5713_fg_calculate_iocv(fuelgauge, true);
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1);
|
|
ret &= ~JIG_CONNECTED;
|
|
ret |= JIG_CONNECTED;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1, ret);
|
|
} else
|
|
value = sm5713_fg_calculate_iocv(fuelgauge, false);
|
|
|
|
if ((fuelgauge->info.volt_cal[0] & 0x0080) == 0x0080) {
|
|
value = value - (fuelgauge->info.volt_cal[0] & 0x007F);
|
|
} else {
|
|
value = value + (fuelgauge->info.volt_cal[0] & 0x007F);
|
|
}
|
|
}
|
|
|
|
msleep(10);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_IOCV_MAN, value);
|
|
pr_info("%s: IOCV_MAN_WRITE = %d : 0x%x\n", __func__, SM5713_FG_REG_IOCV_MAN, value);
|
|
|
|
/* init delay */
|
|
msleep(20);
|
|
|
|
/* write cycle cfg */
|
|
sm5713_set_cycle_cfg(fuelgauge);
|
|
/* write auto_rs_man cfg */
|
|
sm5713_set_arsm_cfg(fuelgauge);
|
|
|
|
/* write batt data version */
|
|
value = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1);
|
|
value &= ~DATA_VERSION;
|
|
value |= (fuelgauge->info.data_ver << 4) & DATA_VERSION;
|
|
if (error_remain)
|
|
value |= I2C_ERROR_REMAIN;
|
|
if (error_check)
|
|
value |= I2C_ERROR_CHECK;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1, value);
|
|
pr_info("%s: RESERVED = %d : 0x%x\n", __func__, SM5713_FG_REG_USER_RESERV_1, value);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int sm5713_abnormal_reset_check(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int cntl_read, reset_read;
|
|
|
|
reset_read = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_RESET) & 0xF000;
|
|
/* abnormal case process */
|
|
if (sm5713_fg_check_reg_init_need(fuelgauge) || (reset_read == 0)) {
|
|
cntl_read = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_CNTL);
|
|
pr_info("%s: SM5713 FG abnormal case!!!! SM5713_REG_CNTL : 0x%x, is_FG_initialised : %d, reset_read : 0x%x\n", __func__, cntl_read, fuelgauge->info.is_FG_initialised, reset_read);
|
|
|
|
if (fuelgauge->info.is_FG_initialised == 1) {
|
|
/* SW reset code */
|
|
fuelgauge->info.is_FG_initialised = 0;
|
|
if (sm5713_fg_verified_write_word(fuelgauge->i2c, SM5713_FG_REG_RESET, SW_RESET_OTP_CODE) < 0) {
|
|
pr_info("%s: Warning!!!! SM5713 FG abnormal case.... SW reset FAIL \n", __func__);
|
|
} else {
|
|
pr_info("%s: SM5713 FG abnormal case.... SW reset OK\n", __func__);
|
|
}
|
|
/* delay 100ms */
|
|
msleep(100);
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
sm5713_meas_mq_off(fuelgauge);
|
|
#endif
|
|
/* init code */
|
|
sm5713_fg_init(fuelgauge, true);
|
|
}
|
|
return FG_ABNORMAL_RESET;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sm5713_get_device_id(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_DEVICE_ID);
|
|
sm5713_device_id = ret;
|
|
pr_info("%s: SM5713 device_id = 0x%x\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int sm5713_call_fg_device_id(void)
|
|
{
|
|
pr_info("%s: extern call SM5713 fg_device_id = 0x%x\n", __func__, sm5713_device_id);
|
|
|
|
return sm5713_device_id;
|
|
}
|
|
|
|
unsigned int sm5713_get_soc(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
unsigned int soc;
|
|
|
|
|
|
|
|
pr_info("%s: \n", __func__);
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_SOC);
|
|
if (ret < 0) {
|
|
pr_err("%s: Warning!!!! read soc reg fail\n", __func__);
|
|
soc = 500;
|
|
} else {
|
|
soc = ((ret&0x7f00)>>8) * 10; /* integer bit; */
|
|
soc = soc + (((ret&0x00ff)*10)/256); /* integer + fractional bit */
|
|
}
|
|
|
|
if (ret&0x8000) {
|
|
soc = 0;
|
|
}
|
|
/* soc = 500; */
|
|
|
|
if (sm5713_abnormal_reset_check(fuelgauge) < 0) {
|
|
pr_info("%s: FG init ERROR!! pre_SOC returned!!, read_SOC = %d, pre_SOC = %d\n", __func__, soc, fuelgauge->info.batt_soc);
|
|
return fuelgauge->info.batt_soc;
|
|
}
|
|
|
|
/* ocv update */
|
|
sm5713_get_ocv(fuelgauge);
|
|
|
|
#ifdef SM5713_FG_FULL_DEBUG
|
|
pr_info("%s: read = 0x%x, soc = %d\n", __func__, ret, soc);
|
|
#endif
|
|
|
|
/* for low temp power off test */
|
|
if (fuelgauge->info.volt_alert_flag && (fuelgauge->info.temperature < -100)) {
|
|
pr_info("%s: volt_alert_flag is TRUE!!!! SOC make force ZERO!!!!\n", __func__);
|
|
fuelgauge->info.batt_soc = 0;
|
|
return 0;
|
|
} else {
|
|
fuelgauge->info.batt_soc = soc;
|
|
pr_info("%s: batt_soc = %d, soc = %d\n", __func__, fuelgauge->info.batt_soc, soc);
|
|
}
|
|
|
|
return soc;
|
|
}
|
|
|
|
static void sm5713_fg_test_read(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret0, ret1, ret2, ret3, ret4, ret5, ret6, ret7, ret8, ret9, t_addr;
|
|
|
|
t_addr = SM5713_FG_REG_TABLE_0_START + (FG_TABLE_LEN+1);
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TABLE_0_START);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TABLE_0_START+FG_TABLE_LEN-3);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TABLE_0_START+FG_TABLE_LEN-2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TABLE_0_START+FG_TABLE_LEN-1);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_TABLE_0_START+FG_TABLE_LEN);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, 0x28);
|
|
ret6 = sm5713_read_word(fuelgauge->i2c, 0x2F);
|
|
ret7 = sm5713_read_word(fuelgauge->i2c, 0x01);
|
|
pr_info("%s: 0xA0=0x%04x, 0xAC=0x%04x, 0xAD=0x%04x, 0xAE=0x%04x, 0xAF=0x%04x, 0x28=0x%04x, 0x2F=0x%04x, 0x01=0x%04x, SM5713_ID=0x%04x\n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5, ret6, ret7, sm5713_device_id);
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, t_addr);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, t_addr+FG_TABLE_LEN-3);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, t_addr+FG_TABLE_LEN-2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, t_addr+FG_TABLE_LEN-1);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, t_addr+FG_TABLE_LEN);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, 0x85);
|
|
ret6 = sm5713_read_word(fuelgauge->i2c, 0x86);
|
|
ret7 = sm5713_read_word(fuelgauge->i2c, 0x87);
|
|
ret8 = sm5713_read_word(fuelgauge->i2c, 0x1F);
|
|
ret9 = sm5713_read_word(fuelgauge->i2c, 0x94);
|
|
pr_info("%s: 0xB0=0x%04x, 0xBC=0x%04x, 0xBD=0x%04x, 0xBE=0x%04x, 0xBF=0x%04x, 0x85=0x%04x, 0x86=0x%04x, 0x87=0x%04x, 0x1F=0x%04x, 0x94=0x%04x\n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5, ret6, ret7, ret8, ret9);
|
|
|
|
return;
|
|
}
|
|
|
|
static void sm5713_update_all_value(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
|
|
union power_supply_propval value;
|
|
int temp;
|
|
|
|
fuelgauge->is_charging = (fuelgauge->info.flag_charge_health |
|
|
fuelgauge->ta_exist) && (fuelgauge->info.batt_current >= 30);
|
|
|
|
/* check charger status */
|
|
|
|
psy_do_property("sm5713-charger", get,
|
|
POWER_SUPPLY_PROP_STATUS, value);
|
|
fuelgauge->info.flag_full_charge =
|
|
(value.intval == POWER_SUPPLY_STATUS_FULL) ? 1 : 0;
|
|
fuelgauge->info.flag_chg_status =
|
|
(value.intval == POWER_SUPPLY_STATUS_CHARGING) ? 1 : 0;
|
|
|
|
/* vbat */
|
|
sm5713_get_vbat(fuelgauge);
|
|
|
|
/* current */
|
|
sm5713_get_curr(fuelgauge);
|
|
|
|
/* temperature */
|
|
sm5713_get_temperature(fuelgauge);
|
|
|
|
/* cycle */
|
|
sm5713_get_cycle(fuelgauge);
|
|
|
|
/* carc */
|
|
sm5713_cal_carc(fuelgauge);
|
|
|
|
/* soc */
|
|
sm5713_get_soc(fuelgauge);
|
|
|
|
|
|
sm5713_fg_test_read(fuelgauge);
|
|
|
|
pr_info("%s: chg_h=%d, chg_f=%d, chg_s=%d, is_chg=%d, ta_exist=%d, "
|
|
"v=%d, v_avg=%d, i=%d, i_avg=%d, ocv=%d, fg_t=%d, b_t=%d, cycle=%d, soc=%d, state=0x%x\n",
|
|
__func__, fuelgauge->info.flag_charge_health, fuelgauge->info.flag_full_charge,
|
|
fuelgauge->info.flag_chg_status, fuelgauge->is_charging, fuelgauge->ta_exist,
|
|
fuelgauge->info.batt_voltage, fuelgauge->info.batt_avgvoltage,
|
|
fuelgauge->info.batt_current, fuelgauge->info.batt_avgcurrent, fuelgauge->info.batt_ocv,
|
|
fuelgauge->info.temp_fg, fuelgauge->info.temperature, fuelgauge->info.batt_soc_cycle,
|
|
fuelgauge->info.batt_soc, sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_OCV_STATE));
|
|
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
fuelgauge->info.full_mq_dump = sm5713_meas_mq_dump(fuelgauge);
|
|
#endif
|
|
|
|
// for abnormal case asoc update stop, MUST USE AFTER PASSS_5
|
|
if (fuelgauge->pmic_rev > 5)
|
|
{
|
|
if (fuelgauge->info.temperature/10 < 18)
|
|
{
|
|
temp = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_MISC);
|
|
temp = temp & !0x0040;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MISC, temp);
|
|
}
|
|
else if ((fuelgauge->info.temperature/10 > fuelgauge->info.temp_std) && (fuelgauge->info.batt_soc > 950))
|
|
{
|
|
temp = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_MISC);
|
|
temp = temp | 0x0040;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MISC, temp);
|
|
}
|
|
pr_info("%s : temp = 0x%x, t = %d \n", __func__, temp, fuelgauge->info.temperature);
|
|
}
|
|
// for abnormal case asoc update stop, MUST USE AFTER PASSS_5
|
|
}
|
|
|
|
static int sm5713_fg_set_jig_mode_real_vbat(struct sm5713_fuelgauge_data *fuelgauge, int meas_mode)
|
|
{
|
|
int stat;
|
|
|
|
fuelgauge->isjigmoderealvbat = false;
|
|
|
|
if (sm5713_fg_check_reg_init_need(fuelgauge)) {
|
|
pr_info("%s: FG init fail!! \n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/** meas_mode = 0 is inbat mode with jig **/
|
|
if (meas_mode == SEC_BAT_INBAT_FGSRC_SWITCHING_VBAT) {
|
|
stat = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AUX_STAT);
|
|
if (stat & 0x0002) {
|
|
fuelgauge->isjigmoderealvbat = true;
|
|
pr_info("%s: FG check jig_ON!! and after read real VBAT!! \n", __func__);
|
|
} else
|
|
pr_info("%s: isjigmoderealvbat = 1 but FG check nENQ4 LOW!! check jig!! \n", __func__);
|
|
} else
|
|
pr_info("%s: meas_mode = 1, isjigmoderealvbat = false!! \n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5713_fg_check_battery_present(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
/* SM5713 is not suport batt present */
|
|
pr_info("%s: sm5713_fg_get_batt_present\n", __func__);
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool sm5713_check_jig_status(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
bool ret = false;
|
|
|
|
if (fuelgauge->pdata->jig_gpio) {
|
|
if (fuelgauge->pdata->jig_low_active)
|
|
ret = !gpio_get_value(fuelgauge->pdata->jig_gpio);
|
|
else
|
|
ret = gpio_get_value(fuelgauge->pdata->jig_gpio);
|
|
}
|
|
pr_info("%s: jig_gpio(%d), ret(%d)\n",
|
|
__func__, fuelgauge->pdata->jig_gpio, ret);
|
|
return ret;
|
|
}
|
|
|
|
void sm5713_fg_reset_capacity_by_jig_connection(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1);
|
|
ret &= ~JIG_CONNECTED;
|
|
ret |= JIG_CONNECTED;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1, ret);
|
|
|
|
pr_info("%s: set JIG_CONNECTED(0x%04x) (Jig Connection or bypass)\n", __func__, ret);
|
|
}
|
|
|
|
int sm5713_fg_alert_init(struct sm5713_fuelgauge_data *fuelgauge, int soc)
|
|
{
|
|
int ret;
|
|
int value_soc_alarm;
|
|
|
|
fuelgauge->is_fuel_alerted = false;
|
|
|
|
/* remove interrupt */
|
|
/* ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_INTFG); */
|
|
|
|
/* check status */
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_STATUS);
|
|
if (ret < 0) {
|
|
pr_err("%s: Failed to read SM5713_FG_REG_STATUS\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* remove all mask */
|
|
/* sm5713_write_word(fuelgauge->i2c,SM5713_FG_REG_INTFG_MASK, 0x0000); */
|
|
|
|
/* enable volt alert only, other alert mask */
|
|
/*
|
|
ret = MASK_L_SOC_INT|MASK_H_TEM_INT|MASK_L_TEM_INT;
|
|
sm5713_write_word(fuelgauge->i2c,SM5713_FG_REG_INTFG_MASK,ret);
|
|
fuelgauge->info.irq_ctrl = ~(ret);
|
|
*/
|
|
value_soc_alarm = (soc<<8); /* 0x0100 = 1.00% */
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_SOC_ALARM, value_soc_alarm) < 0) {
|
|
pr_err("%s: Failed to write SM5713_FG_REG_SOC_ALARM\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* enabel volt alert control, other alert disable */
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_CNTL);
|
|
if (ret < 0) {
|
|
pr_err("%s: Failed to read SM5713_FG_REG_CNTL\n", __func__);
|
|
return -1;
|
|
}
|
|
ret = ret | ENABLE_V_ALARM;
|
|
ret = ret & (~ENABLE_SOC_ALARM & ~ENABLE_T_H_ALARM & ~ENABLE_T_L_ALARM);
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_CNTL, ret) < 0) {
|
|
pr_err("%s: Failed to write SM5713_REG_CNTL\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
pr_info("%s: fg_irq= 0x%x, REG_CNTL=0x%x, SOC_ALARM=0x%x \n",
|
|
__func__, fuelgauge->fg_irq, ret, value_soc_alarm);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int sm5713_set_tcal_ioff(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int tcal, ioff;
|
|
|
|
tcal = fuelgauge->info.tcal_ioff[0];
|
|
ioff = fuelgauge->info.tcal_ioff[1];
|
|
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_TEMP_CAL, tcal);
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AUX_3, ioff);
|
|
pr_info("%s : set tcal & ioff!! tcal = 0x%x, ioff = 0x%x\n", __func__, tcal, ioff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5713_asoc_init(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret, temp;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_AGING_CTRL);
|
|
pr_info("%s 0x%x : 0x%x\n", __func__, SM5713_FG_REG_AGING_CTRL, ret);
|
|
if(ret != fuelgauge->info.age_cntl){
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_AGING_CTRL, fuelgauge->info.age_cntl) < 0) {
|
|
pr_err("%s: Failed to write SM5713_FG_REG_AGING_CTRL\n", __func__);
|
|
}
|
|
}
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_2);
|
|
temp = ret;
|
|
ret = ret & 0x7F;
|
|
if (ret == 0) {
|
|
fuelgauge->info.soh = 100;
|
|
temp = temp & 0x80;
|
|
temp = temp | fuelgauge->info.soh;
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_2, temp);
|
|
pr_info("%s : soh reset %d, write 0x%x\n", __func__, fuelgauge->info.soh, temp);
|
|
} else {
|
|
fuelgauge->info.soh = ret;
|
|
pr_info("%s asoc restore : %d\n", __func__, fuelgauge->info.soh);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sm5713_jig_irq_thread(int irq, void *irq_data)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = irq_data;
|
|
|
|
if (sm5713_check_jig_status(fuelgauge))
|
|
sm5713_fg_reset_capacity_by_jig_connection(fuelgauge);
|
|
else
|
|
pr_info("%s: jig removed\n", __func__);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sm5713_fg_buffer_read(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
int ret0, ret1, ret2, ret3, ret4, ret5;
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V+1);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V+2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V+3);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V+4);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_V+5);
|
|
pr_info("%s: sm5713 FG buffer 0x30_0x35 lb_V = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x \n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5);
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V+1);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V+2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V+3);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V+4);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_V+5);
|
|
pr_info("%s: sm5713 FG buffer 0x36_0x3B cb_V = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x \n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5);
|
|
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I+1);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I+2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I+3);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I+4);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_LB_I+5);
|
|
pr_info("%s: sm5713 FG buffer 0x40_0x45 lb_I = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x \n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5);
|
|
|
|
|
|
ret0 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I);
|
|
ret1 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I+1);
|
|
ret2 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I+2);
|
|
ret3 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I+3);
|
|
ret4 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I+4);
|
|
ret5 = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_START_CB_I+5);
|
|
pr_info("%s: sm5713 FG buffer 0x46_0x4B cb_I = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x \n",
|
|
__func__, ret0, ret1, ret2, ret3, ret4, ret5);
|
|
|
|
return;
|
|
}
|
|
|
|
static bool sm5713_fg_init(struct sm5713_fuelgauge_data *fuelgauge, bool is_surge)
|
|
{
|
|
int error_remain, ret;
|
|
|
|
fuelgauge->info.is_FG_initialised = 0;
|
|
|
|
if (sm5713_get_device_id(fuelgauge) < 0) {
|
|
return false;
|
|
}
|
|
sm5713_fg_check_battery_present(fuelgauge);
|
|
|
|
if (fuelgauge->pdata->jig_gpio) {
|
|
int ret;
|
|
/* if (fuelgauge->pdata->jig_low_active) { */
|
|
if (0) {
|
|
ret = request_threaded_irq(fuelgauge->pdata->jig_irq,
|
|
NULL, sm5713_jig_irq_thread,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
"jig-irq", fuelgauge);
|
|
} else {
|
|
ret = request_threaded_irq(fuelgauge->pdata->jig_irq,
|
|
NULL, sm5713_jig_irq_thread,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
"jig-irq", fuelgauge);
|
|
}
|
|
if (ret) {
|
|
pr_info("%s: Failed to Request IRQ\n",
|
|
__func__);
|
|
}
|
|
pr_info("%s: jig_result : %d\n", __func__, sm5713_check_jig_status(fuelgauge));
|
|
|
|
/* initial check for the JIG */
|
|
if (sm5713_check_jig_status(fuelgauge))
|
|
sm5713_fg_reset_capacity_by_jig_connection(fuelgauge);
|
|
}
|
|
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
fuelgauge->info.q_max_now = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_BAT_CAP);
|
|
pr_info("%s: q_max_now = 0x%x\n", __func__, fuelgauge->info.q_max_now);
|
|
#endif
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_USER_RESERV_1);
|
|
error_remain = (ret & I2C_ERROR_REMAIN) ? 1 : 0;
|
|
pr_info("%s: reserv_1 = 0x%x\n", __func__, ret);
|
|
|
|
if (sm5713_fg_check_reg_init_need(fuelgauge) || error_remain) {
|
|
if (sm5713_fg_reg_init(fuelgauge, is_surge))
|
|
pr_info("%s: boot time kernel init DONE!\n", __func__);
|
|
else
|
|
pr_info("%s: ERROR!! boot time kernel init ERROR!!\n", __func__);
|
|
} else {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MIX_RATE, fuelgauge->info.mix_value[0]);
|
|
}
|
|
|
|
sm5713_dp_setup(fuelgauge);
|
|
sm5713_alg_setup(fuelgauge);
|
|
|
|
sm5713_coeff_setup(fuelgauge);
|
|
|
|
/* for debug */
|
|
sm5713_fg_buffer_read(fuelgauge);
|
|
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
/* for start mq */
|
|
if (is_surge) {
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_Q_MEAS_INIT, ((fuelgauge->info.full_mq_dump<<11)/1000));
|
|
}
|
|
sm5713_meas_mq_start(fuelgauge);
|
|
#endif
|
|
|
|
sm5713_set_tcal_ioff(fuelgauge);
|
|
sm5713_asoc_init(fuelgauge);
|
|
|
|
fuelgauge->info.is_FG_initialised = 1;
|
|
|
|
return true;
|
|
}
|
|
|
|
bool sm5713_fg_fuelalert_init(struct sm5713_fuelgauge_data *fuelgauge,
|
|
int soc)
|
|
{
|
|
/* 1. Set sm5713 alert configuration. */
|
|
if (sm5713_fg_alert_init(fuelgauge, soc) > 0)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
void sm5713_fg_fuelalert_set(struct sm5713_fuelgauge_data *fuelgauge,
|
|
int enable)
|
|
{
|
|
u16 ret;
|
|
|
|
ret = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_STATUS);
|
|
pr_info("%s: SM5713_FG_REG_STATUS(0x%x)\n",
|
|
__func__, ret);
|
|
|
|
/* not use SOC alarm
|
|
if (ret & fuelgauge->info.irq_ctrl & ENABLE_SOC_ALARM) {
|
|
fuelgauge->info.soc_alert_flag = true;
|
|
*/ /* todo more action */
|
|
/* }
|
|
*/
|
|
|
|
if (ret & ENABLE_V_ALARM && !lpcharge && !fuelgauge->is_charging) {
|
|
pr_info("%s : Battery Voltage is Very Low!! SW V EMPTY ENABLE\n", __func__);
|
|
|
|
if (fuelgauge->vempty_mode == VEMPTY_MODE_SW ||
|
|
fuelgauge->vempty_mode == VEMPTY_MODE_SW_VALERT) {
|
|
fuelgauge->vempty_mode = VEMPTY_MODE_SW_VALERT;
|
|
}
|
|
#if defined(CONFIG_BATTERY_CISD)
|
|
else {
|
|
union power_supply_propval value;
|
|
value.intval = fuelgauge->vempty_mode;
|
|
psy_do_property("battery", set,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MIN, value);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
bool sm5713_fg_fuelalert_process(void *irq_data)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge =
|
|
(struct sm5713_fuelgauge_data *)irq_data;
|
|
|
|
sm5713_fg_fuelalert_set(fuelgauge, 0);
|
|
|
|
return true;
|
|
}
|
|
|
|
bool sm5713_fg_reset(struct sm5713_fuelgauge_data *fuelgauge, bool is_quickstart)
|
|
{
|
|
if (fuelgauge->info.is_FG_initialised == 0) {
|
|
pr_info("%s: Not work reset! prev init working! return! \n", __func__);
|
|
return true;
|
|
}
|
|
|
|
pr_info("%s: Start fg reset\n", __func__);
|
|
/* SW reset code */
|
|
fuelgauge->info.is_FG_initialised = 0;
|
|
sm5713_fg_verified_write_word(fuelgauge->i2c, SM5713_FG_REG_RESET, SW_RESET_CODE);
|
|
/* delay 1000ms */
|
|
msleep(1000);
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
sm5713_meas_mq_off(fuelgauge);
|
|
#endif
|
|
|
|
if (is_quickstart) {
|
|
if (sm5713_fg_init(fuelgauge, false)) {
|
|
pr_info("%s: Quick Start - mq STOP!!\n", __func__);
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
sm5713_meas_mq_off(fuelgauge);
|
|
#endif
|
|
} else {
|
|
pr_info("%s: sm5713_fg_init ERROR!!!!\n", __func__);
|
|
return false;
|
|
}
|
|
}
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
else {
|
|
if (sm5713_fg_init(fuelgauge, true)) {
|
|
pr_info("%s: BATT_LONG_LIFE reset - mq CONTINUE!!\n", __func__);
|
|
} else {
|
|
pr_info("%s: sm5713_fg_init ERROR!!!!\n", __func__);
|
|
return false;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
pr_info("%s: End fg reset\n", __func__);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int sm5713_fg_check_capacity_max(
|
|
struct sm5713_fuelgauge_data *fuelgauge, int capacity_max)
|
|
{
|
|
int cap_max, cap_min;
|
|
|
|
cap_max = fuelgauge->pdata->capacity_max;
|
|
cap_min = (fuelgauge->pdata->capacity_max -
|
|
fuelgauge->pdata->capacity_max_margin);
|
|
|
|
return (capacity_max < cap_min) ? cap_min :
|
|
((capacity_max >= cap_max) ? cap_max : capacity_max);
|
|
}
|
|
|
|
static void sm5713_fg_get_scaled_capacity(
|
|
struct sm5713_fuelgauge_data *fuelgauge,
|
|
union power_supply_propval *val)
|
|
{
|
|
val->intval = (val->intval < fuelgauge->pdata->capacity_min) ?
|
|
0 : ((val->intval - fuelgauge->pdata->capacity_min) * 1000 /
|
|
(fuelgauge->capacity_max - fuelgauge->pdata->capacity_min));
|
|
|
|
pr_info("%s: scaled capacity (%d.%d)\n",
|
|
__func__, val->intval/10, val->intval%10);
|
|
}
|
|
|
|
|
|
/* capacity is integer */
|
|
static void sm5713_fg_get_atomic_capacity(
|
|
struct sm5713_fuelgauge_data *fuelgauge,
|
|
union power_supply_propval *val)
|
|
{
|
|
|
|
pr_debug("%s : NOW(%d), OLD(%d)\n",
|
|
__func__, val->intval, fuelgauge->capacity_old);
|
|
|
|
if (fuelgauge->pdata->capacity_calculation_type &
|
|
SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC) {
|
|
if (fuelgauge->capacity_old < val->intval)
|
|
val->intval = fuelgauge->capacity_old + 1;
|
|
else if (fuelgauge->capacity_old > val->intval)
|
|
val->intval = fuelgauge->capacity_old - 1;
|
|
}
|
|
|
|
/* keep SOC stable in abnormal status */
|
|
if (fuelgauge->pdata->capacity_calculation_type &
|
|
SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL) {
|
|
if (!fuelgauge->is_charging &&
|
|
fuelgauge->capacity_old < val->intval) {
|
|
pr_err("%s: capacity (old %d : new %d)\n",
|
|
__func__, fuelgauge->capacity_old, val->intval);
|
|
val->intval = fuelgauge->capacity_old;
|
|
}
|
|
}
|
|
|
|
/* updated old capacity */
|
|
fuelgauge->capacity_old = val->intval;
|
|
}
|
|
|
|
static int sm5713_fg_calculate_dynamic_scale(
|
|
struct sm5713_fuelgauge_data *fuelgauge, int capacity)
|
|
{
|
|
union power_supply_propval raw_soc_val;
|
|
raw_soc_val.intval = sm5713_get_soc(fuelgauge);
|
|
|
|
if (raw_soc_val.intval <
|
|
fuelgauge->pdata->capacity_max -
|
|
fuelgauge->pdata->capacity_max_margin) {
|
|
pr_info("%s: raw soc(%d) is very low, skip routine\n",
|
|
__func__, raw_soc_val.intval);
|
|
} else {
|
|
fuelgauge->capacity_max =
|
|
(raw_soc_val.intval * 100 / (capacity + 1));
|
|
fuelgauge->capacity_old = capacity;
|
|
|
|
fuelgauge->capacity_max =
|
|
sm5713_fg_check_capacity_max(fuelgauge,
|
|
fuelgauge->capacity_max);
|
|
|
|
pr_info("%s: %d is used for capacity_max, capacity(%d)\n",
|
|
__func__, fuelgauge->capacity_max, capacity);
|
|
}
|
|
|
|
return fuelgauge->capacity_max;
|
|
}
|
|
|
|
#if defined(CONFIG_EN_OOPS)
|
|
static void sm5713_set_full_value(struct sm5713_fuelgauge_data *fuelgauge,
|
|
int cable_type)
|
|
{
|
|
pr_info("%s : sm5713 todo\n",
|
|
__func__);
|
|
}
|
|
#endif
|
|
|
|
static int calc_ttf(struct sm5713_fuelgauge_data *fuelgauge, union power_supply_propval *val)
|
|
{
|
|
int i;
|
|
int cc_time = 0, cv_time = 0;
|
|
|
|
int soc = fuelgauge->raw_capacity;
|
|
int charge_current = val->intval;
|
|
struct cv_slope *cv_data = fuelgauge->cv_data;
|
|
int design_cap = fuelgauge->ttf_capacity;
|
|
|
|
if (!cv_data || (val->intval <= 0)) {
|
|
pr_info("%s: no cv_data or val: %d\n", __func__, val->intval);
|
|
return -1;
|
|
}
|
|
for (i = 0; i < fuelgauge->cv_data_lenth; i++) {
|
|
if (charge_current >= cv_data[i].fg_current)
|
|
break;
|
|
}
|
|
i = i >= fuelgauge->cv_data_lenth ? fuelgauge->cv_data_lenth - 1 : i;
|
|
if (cv_data[i].soc < soc) {
|
|
for (i = 0; i < fuelgauge->cv_data_lenth; i++) {
|
|
if (soc <= cv_data[i].soc)
|
|
break;
|
|
}
|
|
cv_time = ((cv_data[i-1].time - cv_data[i].time) * (cv_data[i].soc - soc)\
|
|
/ (cv_data[i].soc - cv_data[i-1].soc)) + cv_data[i].time;
|
|
} else { /* CC mode || NONE */
|
|
cv_time = cv_data[i].time;
|
|
cc_time = design_cap * (cv_data[i].soc - soc)\
|
|
/ val->intval * 3600 / 1000;
|
|
pr_debug("%s: cc_time: %d\n", __func__, cc_time);
|
|
if (cc_time < 0) {
|
|
cc_time = 0;
|
|
}
|
|
}
|
|
|
|
pr_debug("%s: cap: %d, soc: %4d, T: %6d, avg: %4d, cv soc: %4d, i: %4d, val: %d\n",
|
|
__func__, design_cap, soc, cv_time + cc_time, fuelgauge->info.batt_avgcurrent, cv_data[i].soc, i, val->intval);
|
|
|
|
if (cv_time + cc_time >= 0)
|
|
return cv_time + cc_time + 60;
|
|
else
|
|
return 60; /* minimum 1minutes */
|
|
}
|
|
|
|
static void sm5713_fg_set_vempty(struct sm5713_fuelgauge_data *fuelgauge, int vempty_mode)
|
|
{
|
|
u16 data = 0;
|
|
u32 value_v_alarm = 0;
|
|
|
|
if (!fuelgauge->using_temp_compensation) {
|
|
pr_info("%s: does not use temp compensation, default hw vempty\n", __func__);
|
|
vempty_mode = VEMPTY_MODE_HW;
|
|
}
|
|
|
|
fuelgauge->vempty_mode = vempty_mode;
|
|
|
|
switch (vempty_mode) {
|
|
case VEMPTY_MODE_SW:
|
|
/* HW Vempty Disable */
|
|
|
|
/* set volt alert threshold */
|
|
value_v_alarm = (fuelgauge->battery_data->sw_v_empty_vol << 8)/1000;
|
|
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_V_L_ALARM, value_v_alarm) < 0) {
|
|
pr_info("%s: Failed to write VALRT_THRESHOLD_REG\n", __func__);
|
|
return;
|
|
}
|
|
data = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_V_L_ALARM);
|
|
pr_info("%s: HW V EMPTY Disable, SW V EMPTY Enable with %d mV (%d) \n",
|
|
__func__, fuelgauge->battery_data->sw_v_empty_vol, data);
|
|
break;
|
|
default:
|
|
/* HW Vempty works together with CISD v_alarm */
|
|
value_v_alarm = (fuelgauge->battery_data->sw_v_empty_vol_cisd << 8)/1000;
|
|
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_V_L_ALARM, value_v_alarm) < 0) {
|
|
pr_info("%s: Failed to write VALRT_THRESHOLD_REG\n", __func__);
|
|
return;
|
|
}
|
|
data = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_V_L_ALARM);
|
|
pr_info("%s: HW V EMPTY Enable, SW V EMPTY Disable %d mV (%d) \n",
|
|
__func__, fuelgauge->battery_data->sw_v_empty_vol_cisd, data);
|
|
break;
|
|
}
|
|
|
|
/* for v_alarm Hysteresis */
|
|
value_v_alarm = ((fuelgauge->info.value_v_alarm_hys << 4) / 1000)<<4;
|
|
if (sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_V_ALARM_HYS, value_v_alarm) < 0) {
|
|
pr_info("%s: Failed to write VALRT_THRESHOLD_REG\n", __func__);
|
|
return;
|
|
}
|
|
data = sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_V_ALARM_HYS);
|
|
pr_info("%s: VALRT_THRESHOLD hysteresis set %d mV (0x%x) \n",
|
|
__func__, fuelgauge->info.value_v_alarm_hys, data);
|
|
}
|
|
|
|
static int sm5713_fg_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy);
|
|
enum power_supply_ext_property ext_psp = (enum power_supply_ext_property) psp;
|
|
/*
|
|
static int abnormal_current_cnt = 0;
|
|
union power_supply_propval value;
|
|
*/
|
|
|
|
pr_info("%s: psp = 0x%x\n", __func__, psp);
|
|
switch (psp) {
|
|
/* Cell voltage (VCELL, mV) */
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
sm5713_get_vbat(fuelgauge);
|
|
val->intval = fuelgauge->info.batt_voltage;
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
|
|
switch (val->intval) {
|
|
case SEC_BATTERY_VOLTAGE_OCV:
|
|
val->intval = fuelgauge->info.batt_ocv;
|
|
break;
|
|
case SEC_BATTERY_VOLTAGE_AVERAGE:
|
|
val->intval = fuelgauge->info.batt_avgvoltage;
|
|
break;
|
|
}
|
|
break;
|
|
/* Current */
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
sm5713_get_curr(fuelgauge);
|
|
if (val->intval == SEC_BATTERY_CURRENT_UA)
|
|
val->intval = fuelgauge->info.batt_current * 1000;
|
|
else
|
|
val->intval = fuelgauge->info.batt_current;
|
|
break;
|
|
/* Average Current */
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
if (val->intval == SEC_BATTERY_CURRENT_UA)
|
|
val->intval = fuelgauge->info.batt_avgcurrent * 1000;
|
|
else
|
|
val->intval = fuelgauge->info.batt_avgcurrent;
|
|
break;
|
|
/* Full Capacity */
|
|
case POWER_SUPPLY_PROP_ENERGY_NOW:
|
|
switch (val->intval) {
|
|
case SEC_BATTERY_CAPACITY_DESIGNED:
|
|
break;
|
|
case SEC_BATTERY_CAPACITY_ABSOLUTE:
|
|
break;
|
|
case SEC_BATTERY_CAPACITY_TEMPERARY:
|
|
break;
|
|
case SEC_BATTERY_CAPACITY_CURRENT:
|
|
break;
|
|
case SEC_BATTERY_CAPACITY_AGEDCELL:
|
|
break;
|
|
case SEC_BATTERY_CAPACITY_CYCLE:
|
|
sm5713_get_cycle(fuelgauge);
|
|
val->intval = fuelgauge->info.batt_soc_cycle;
|
|
break;
|
|
/* case SEC_BATTERY_CAPACITY_FULL: */
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
if (sm5713_meas_mq_dump(fuelgauge) > sm5713_get_full_chg_mq(fuelgauge))
|
|
val->intval = sm5713_meas_mq_dump(fuelgauge);
|
|
else
|
|
val->intval = sm5713_get_full_chg_mq(fuelgauge);
|
|
#endif
|
|
/* break; */
|
|
}
|
|
break;
|
|
/* SOC (%) */
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
sm5713_update_all_value(fuelgauge);
|
|
|
|
/* SM5713 F/G unit is 0.1%, raw ==> convert the unit to 0.01% */
|
|
if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RAW) {
|
|
val->intval = fuelgauge->info.batt_soc * 10;
|
|
break;
|
|
} else
|
|
val->intval = fuelgauge->info.batt_soc;
|
|
|
|
if (fuelgauge->pdata->capacity_calculation_type &
|
|
(SEC_FUELGAUGE_CAPACITY_TYPE_SCALE |
|
|
SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE)) {
|
|
sm5713_fg_get_scaled_capacity(fuelgauge, val);
|
|
|
|
if (val->intval > 1010) {
|
|
pr_info("%s : scaled capacity (%d)\n", __func__, val->intval);
|
|
sm5713_fg_calculate_dynamic_scale(fuelgauge, 100);
|
|
}
|
|
}
|
|
|
|
/* capacity should be between 0% and 100%
|
|
* (0.1% degree)
|
|
*/
|
|
if (val->intval > 1000)
|
|
val->intval = 1000;
|
|
if (val->intval < 0)
|
|
val->intval = 0;
|
|
|
|
fuelgauge->raw_capacity = val->intval;
|
|
|
|
/* get only integer part */
|
|
val->intval /= 10;
|
|
|
|
/* SW/HW V Empty setting */
|
|
if (fuelgauge->using_hw_vempty) {
|
|
if (fuelgauge->info.temperature <= (int)fuelgauge->low_temp_limit) {
|
|
if (fuelgauge->raw_capacity <= 50) {
|
|
if (fuelgauge->vempty_mode != VEMPTY_MODE_HW) {
|
|
sm5713_fg_set_vempty(fuelgauge, VEMPTY_MODE_HW);
|
|
}
|
|
} else if (fuelgauge->vempty_mode == VEMPTY_MODE_HW) {
|
|
sm5713_fg_set_vempty(fuelgauge, VEMPTY_MODE_SW);
|
|
}
|
|
} else if (fuelgauge->vempty_mode != VEMPTY_MODE_HW) {
|
|
sm5713_fg_set_vempty(fuelgauge, VEMPTY_MODE_HW);
|
|
}
|
|
}
|
|
|
|
if (!fuelgauge->is_charging &&
|
|
fuelgauge->vempty_mode == VEMPTY_MODE_SW_VALERT && !lpcharge) {
|
|
pr_info("%s : SW V EMPTY. Decrease SOC\n", __func__);
|
|
val->intval = 0;
|
|
} else if ((fuelgauge->vempty_mode == VEMPTY_MODE_SW_RECOVERY) &&
|
|
(val->intval == fuelgauge->capacity_old)) {
|
|
fuelgauge->vempty_mode = VEMPTY_MODE_SW;
|
|
}
|
|
|
|
/* check whether doing the wake_unlock */
|
|
if ((val->intval > fuelgauge->pdata->fuel_alert_soc) &&
|
|
fuelgauge->is_fuel_alerted) {
|
|
sm5713_fg_fuelalert_init(fuelgauge,
|
|
fuelgauge->pdata->fuel_alert_soc);
|
|
}
|
|
|
|
/* (Only for atomic capacity)
|
|
* In initial time, capacity_old is 0.
|
|
* and in resume from sleep,
|
|
* capacity_old is too different from actual soc.
|
|
* should update capacity_old
|
|
* by val->intval in booting or resume.
|
|
*/
|
|
if ((fuelgauge->initial_update_of_soc) &&
|
|
(fuelgauge->vempty_mode != VEMPTY_MODE_SW_VALERT)) {
|
|
/* updated old capacity */
|
|
fuelgauge->capacity_old = val->intval;
|
|
fuelgauge->initial_update_of_soc = false;
|
|
break;
|
|
}
|
|
|
|
if (fuelgauge->pdata->capacity_calculation_type &
|
|
(SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC |
|
|
SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL)) {
|
|
sm5713_fg_get_atomic_capacity(fuelgauge, val);
|
|
}
|
|
break;
|
|
/* Battery Temperature */
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
/* Target Temperature */
|
|
case POWER_SUPPLY_PROP_TEMP_AMBIENT:
|
|
sm5713_get_temperature(fuelgauge);
|
|
val->intval = fuelgauge->info.temp_fg;
|
|
break;
|
|
#if defined(CONFIG_EN_OOPS)
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
return -ENODATA;
|
|
#endif
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL:
|
|
val->intval = sm5713_get_asoc(fuelgauge);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
|
|
val->intval = fuelgauge->capacity_max;
|
|
break;
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
|
|
val->intval = calc_ttf(fuelgauge, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_ENABLED:
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
|
|
val->intval =
|
|
fuelgauge->battery_data->Capacity * fuelgauge->raw_capacity; //uAh
|
|
break;
|
|
#if defined(CONFIG_BATTERY_AGE_FORECAST)
|
|
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
|
|
return -ENODATA;
|
|
#endif
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
val->intval = IC_TYPE_IFPMIC_SM5713;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX:
|
|
switch (ext_psp) {
|
|
case POWER_SUPPLY_EXT_PROP_JIG_GPIO:
|
|
if (fuelgauge->pdata->jig_gpio)
|
|
val->intval = gpio_get_value(fuelgauge->pdata->jig_gpio);
|
|
else
|
|
val->intval = -1;
|
|
pr_info("%s: jig gpio = %d \n", __func__, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MEASURE_SYS:
|
|
/* not supported */
|
|
val->intval = 0;
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_VOLT_SLOPE:
|
|
val->intval = (sm5713_read_word(fuelgauge->i2c, SM5713_FG_REG_VOLT_CAL) & 0xFF00);
|
|
pr_info("%s: VOLT SLOPE = 0x%x \n", __func__, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MONITOR_WORK:
|
|
#if !defined(CONFIG_SEC_FACTORY)
|
|
sm5713_fg_periodic_read(fuelgauge);
|
|
#endif
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_UPDATE_BATTERY_DATA)
|
|
static int sm5713_fuelgauge_parse_dt(struct sm5713_fuelgauge_data *fuelgauge);
|
|
#endif
|
|
static int sm5713_fg_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy);
|
|
enum power_supply_ext_property ext_psp = (enum power_supply_ext_property) psp;
|
|
/*u8 data[2] = {0, 0}; */
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
if (val->intval == POWER_SUPPLY_STATUS_FULL) {
|
|
pr_info("%s: POWER_SUPPLY_STATUS_FULL : q_max_now = 0x%x \n", __func__, fuelgauge->info.q_max_now);
|
|
if (fuelgauge->info.q_max_now !=
|
|
fuelgauge->info.q_max_table[get_v_max_index_by_cycle(fuelgauge)]) {
|
|
if (!sm5713_fg_reset(fuelgauge, false))
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
#endif
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
|
if (fuelgauge->pdata->capacity_calculation_type &
|
|
SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE)
|
|
sm5713_fg_calculate_dynamic_scale(fuelgauge, val->intval);
|
|
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
if (sm5713_meas_mq_dump(fuelgauge) > sm5713_get_full_chg_mq(fuelgauge))
|
|
sm5713_set_full_chg_mq(fuelgauge, sm5713_meas_mq_dump(fuelgauge));
|
|
#endif
|
|
break;
|
|
#if defined(CONFIG_EN_OOPS)
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
sm5713_set_full_value(fuelgauge, val->intval);
|
|
break;
|
|
#endif
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
fuelgauge->cable_type = val->intval;
|
|
if (is_nocharge_type(fuelgauge->cable_type)) {
|
|
fuelgauge->ta_exist = false;
|
|
fuelgauge->is_charging = false;
|
|
} else {
|
|
fuelgauge->ta_exist = true;
|
|
fuelgauge->is_charging = true;
|
|
|
|
/* enable alert */
|
|
if (fuelgauge->vempty_mode >= VEMPTY_MODE_SW_VALERT) {
|
|
sm5713_fg_set_vempty(fuelgauge, VEMPTY_MODE_HW);
|
|
fuelgauge->initial_update_of_soc = true;
|
|
sm5713_fg_fuelalert_init(fuelgauge,
|
|
fuelgauge->pdata->fuel_alert_soc);
|
|
}
|
|
}
|
|
break;
|
|
/* Battery Temperature */
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RESET) {
|
|
if (!sm5713_fg_reset(fuelgauge, true))
|
|
return -EINVAL;
|
|
else
|
|
fuelgauge->initial_update_of_soc = true;
|
|
}
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
fuelgauge->info.temperature = val->intval;
|
|
if (val->intval < 0) {
|
|
pr_info("%s: set the low temp reset! temp : %d\n",
|
|
__func__, val->intval);
|
|
}
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP_AMBIENT:
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
fuelgauge->info.flag_charge_health =
|
|
(val->intval == POWER_SUPPLY_HEALTH_GOOD) ? 1 : 0;
|
|
pr_info("%s: charge health from charger = 0x%x\n", __func__, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ENERGY_NOW:
|
|
sm5713_fg_reset_capacity_by_jig_connection(fuelgauge);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
|
|
pr_info("%s: capacity_max changed, %d -> %d\n",
|
|
__func__, fuelgauge->capacity_max, val->intval);
|
|
fuelgauge->capacity_max = sm5713_fg_check_capacity_max(fuelgauge, val->intval);
|
|
fuelgauge->initial_update_of_soc = true;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_ENABLED:
|
|
case POWER_SUPPLY_PROP_CHARGING_ENABLED:
|
|
break;
|
|
#if defined(CONFIG_BATTERY_AGE_FORECAST)
|
|
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
|
|
pr_info("%s: full condition soc changed, %d -> %d\n",
|
|
__func__, fuelgauge->chg_full_soc, val->intval);
|
|
fuelgauge->chg_full_soc = val->intval;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(CONFIG_UPDATE_BATTERY_DATA)
|
|
case POWER_SUPPLY_PROP_POWER_DESIGN:
|
|
sm5713_fuelgauge_parse_dt(fuelgauge);
|
|
break;
|
|
#endif
|
|
case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX:
|
|
switch (ext_psp) {
|
|
case POWER_SUPPLY_EXT_PROP_FGSRC_SWITCHING:
|
|
sm5713_fg_set_jig_mode_real_vbat(fuelgauge, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_FUELGAUGE_FACTORY:
|
|
if (val->intval) {
|
|
pr_info("%s: bypass mode is enabled\n", __func__);
|
|
sm5713_fg_reset_capacity_by_jig_connection(fuelgauge);
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sm5713_fg_isr_work(struct work_struct *work)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge =
|
|
container_of(work, struct sm5713_fuelgauge_data, isr_work.work);
|
|
|
|
/* process for fuel gauge chip */
|
|
sm5713_fg_fuelalert_process(fuelgauge);
|
|
|
|
wake_unlock(&fuelgauge->fuel_alert_wake_lock);
|
|
}
|
|
|
|
static irqreturn_t sm5713_fg_irq_thread(int irq, void *irq_data)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = irq_data;
|
|
|
|
pr_info("%s\n", __func__);
|
|
|
|
if (fuelgauge->is_fuel_alerted) {
|
|
return IRQ_HANDLED;
|
|
} else {
|
|
wake_lock(&fuelgauge->fuel_alert_wake_lock);
|
|
fuelgauge->is_fuel_alerted = true;
|
|
schedule_delayed_work(&fuelgauge->isr_work, 0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sm5713_fuelgauge_debugfs_show(struct seq_file *s, void *data)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = s->private;
|
|
int i;
|
|
u8 reg;
|
|
u8 reg_data;
|
|
|
|
seq_printf(s, "SM5713 FUELGAUGE IC :\n");
|
|
seq_printf(s, "===================\n");
|
|
for (i = 0; i < 16; i++) {
|
|
if (i == 12)
|
|
continue;
|
|
for (reg = 0; reg < 0x10; reg++) {
|
|
reg_data = sm5713_read_word(fuelgauge->i2c, reg + i * 0x10);
|
|
seq_printf(s, "0x%02x:\t0x%04x\n", reg + i * 0x10, reg_data);
|
|
}
|
|
if (i == 4)
|
|
i = 10;
|
|
}
|
|
seq_printf(s, "\n");
|
|
return 0;
|
|
}
|
|
|
|
static int sm5713_fuelgauge_debugfs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, sm5713_fuelgauge_debugfs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations sm5713_fuelgauge_debugfs_fops = {
|
|
.open = sm5713_fuelgauge_debugfs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
#define PROPERTY_NAME_SIZE 128
|
|
|
|
#define PINFO(format, args...) \
|
|
printk(KERN_INFO "%s() line-%d: " format, \
|
|
__func__, __LINE__, ## args)
|
|
|
|
#if defined(ENABLE_BATT_LONG_LIFE)
|
|
static int temp_parse_dt(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
struct device_node *np = of_find_node_by_name(NULL, "battery");
|
|
int len = 0, ret;
|
|
const u32 *p;
|
|
|
|
if (np == NULL) {
|
|
pr_err("%s np NULL\n", __func__);
|
|
} else {
|
|
p = of_get_property(np, "battery,age_data", &len);
|
|
if (p) {
|
|
fuelgauge->pdata->num_age_step = len / sizeof(sec_age_data_t);
|
|
fuelgauge->pdata->age_data = kzalloc(len, GFP_KERNEL);
|
|
ret = of_property_read_u32_array(np, "battery,age_data",
|
|
(u32 *)fuelgauge->pdata->age_data, len/sizeof(u32));
|
|
if (ret) {
|
|
pr_err("%s failed to read battery->pdata->age_data: %d\n",
|
|
__func__, ret);
|
|
kfree(fuelgauge->pdata->age_data);
|
|
fuelgauge->pdata->age_data = NULL;
|
|
fuelgauge->pdata->num_age_step = 0;
|
|
}
|
|
pr_info("%s num_age_step : %d\n", __func__, fuelgauge->pdata->num_age_step);
|
|
for (len = 0; len < fuelgauge->pdata->num_age_step; ++len) {
|
|
pr_info("[%d/%d]cycle:%d, float:%d, full_v:%d, recharge_v:%d, soc:%d\n",
|
|
len, fuelgauge->pdata->num_age_step-1,
|
|
fuelgauge->pdata->age_data[len].cycle,
|
|
fuelgauge->pdata->age_data[len].float_voltage,
|
|
fuelgauge->pdata->age_data[len].full_condition_vcell,
|
|
fuelgauge->pdata->age_data[len].recharge_condition_vcell,
|
|
fuelgauge->pdata->age_data[len].full_condition_soc);
|
|
}
|
|
} else {
|
|
fuelgauge->pdata->num_age_step = 0;
|
|
pr_err("%s there is not age_data\n", __func__);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sm5713_fuelgauge_parse_dt(struct sm5713_fuelgauge_data *fuelgauge)
|
|
{
|
|
char prop_name[PROPERTY_NAME_SIZE];
|
|
int battery_id = -1;
|
|
int table[24];
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
int v_max_table[5];
|
|
int q_max_table[5];
|
|
#endif
|
|
int rce_value[3];
|
|
int rs_value[5];
|
|
int mix_value[2];
|
|
int battery_type[3];
|
|
int v_alarm[2];
|
|
int topoff_soc[3];
|
|
int cycle_cfg[3];
|
|
int v_offset_cancel[4];
|
|
int temp_volcal[3];
|
|
int temp_offset[6];
|
|
int temp_cal[10];
|
|
int volt_cal[2];
|
|
int ext_temp_cal[10];
|
|
int set_temp_poff[4];
|
|
int curr_offset[7];
|
|
int curr_cal[6];
|
|
int arsm[4];
|
|
int tcal_ioff[2];
|
|
#ifdef ENABLE_FULL_OFFSET
|
|
int full_offset[5];
|
|
#endif
|
|
|
|
int ret;
|
|
int i, j;
|
|
const u32 *p;
|
|
int len;
|
|
|
|
struct device_node *np = of_find_node_by_name(NULL, "sm5713-fuelgauge");
|
|
|
|
/* reset, irq gpio info */
|
|
if (np == NULL) {
|
|
pr_err("%s np NULL\n", __func__);
|
|
} else {
|
|
ret = of_property_read_u32(np, "fuelgauge,capacity_max",
|
|
&fuelgauge->pdata->capacity_max);
|
|
if (ret < 0)
|
|
pr_err("%s error reading capacity_max %d\n", __func__, ret);
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,capacity_max_margin",
|
|
&fuelgauge->pdata->capacity_max_margin);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading capacity_max_margin %d\n", __func__, ret);
|
|
fuelgauge->pdata->capacity_max_margin = 300;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,capacity_min",
|
|
&fuelgauge->pdata->capacity_min);
|
|
if (ret < 0)
|
|
pr_err("%s error reading capacity_min %d\n", __func__, ret);
|
|
|
|
pr_info("%s: capacity_max: %d, capacity_max_margin: %d, capacity_min: %d\n",
|
|
__func__, fuelgauge->pdata->capacity_max,
|
|
fuelgauge->pdata->capacity_max_margin, fuelgauge->pdata->capacity_min);
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,capacity_calculation_type",
|
|
&fuelgauge->pdata->capacity_calculation_type);
|
|
if (ret < 0)
|
|
pr_err("%s error reading capacity_calculation_type %d\n",
|
|
__func__, ret);
|
|
ret = of_property_read_u32(np, "fuelgauge,fuel_alert_soc",
|
|
&fuelgauge->pdata->fuel_alert_soc);
|
|
if (ret < 0)
|
|
pr_err("%s error reading pdata->fuel_alert_soc %d\n",
|
|
__func__, ret);
|
|
fuelgauge->pdata->repeated_fuelalert = of_property_read_bool(np,
|
|
"fuelgaguge,repeated_fuelalert");
|
|
|
|
pr_info("%s: "
|
|
"calculation_type: 0x%x, fuel_alert_soc: %d,\n"
|
|
"repeated_fuelalert: %d\n", __func__,
|
|
fuelgauge->pdata->capacity_calculation_type,
|
|
fuelgauge->pdata->fuel_alert_soc, fuelgauge->pdata->repeated_fuelalert);
|
|
|
|
|
|
fuelgauge->using_temp_compensation = of_property_read_bool(np,
|
|
"fuelgauge,using_temp_compensation");
|
|
if (fuelgauge->using_temp_compensation) {
|
|
ret = of_property_read_u32(np, "fuelgauge,low_temp_limit",
|
|
&fuelgauge->low_temp_limit);
|
|
if (ret < 0)
|
|
pr_err("%s error reading low temp limit %d\n", __func__, ret);
|
|
|
|
pr_info("%s : LOW TEMP LIMIT(%d)\n",
|
|
__func__, fuelgauge->low_temp_limit);
|
|
}
|
|
|
|
fuelgauge->using_hw_vempty = of_property_read_bool(np,
|
|
"fuelgauge,using_hw_vempty");
|
|
if (fuelgauge->using_hw_vempty) {
|
|
ret = of_property_read_u32(np, "fuelgauge,v_empty",
|
|
&fuelgauge->battery_data->V_empty);
|
|
if (ret < 0)
|
|
pr_err("%s error reading v_empty %d\n",
|
|
__func__, ret);
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,v_empty_origin",
|
|
&fuelgauge->battery_data->V_empty_origin);
|
|
if (ret < 0)
|
|
pr_err("%s error reading v_empty_origin %d\n",
|
|
__func__, ret);
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,sw_v_empty_voltage_cisd",
|
|
&fuelgauge->battery_data->sw_v_empty_vol_cisd);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading sw_v_empty_default_vol_cise %d\n",
|
|
__func__, ret);
|
|
fuelgauge->battery_data->sw_v_empty_vol_cisd = 3100;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,sw_v_empty_voltage",
|
|
&fuelgauge->battery_data->sw_v_empty_vol);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading sw_v_empty_default_vol %d\n",
|
|
__func__, ret);
|
|
fuelgauge->battery_data->sw_v_empty_vol = 3200;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,sw_v_empty_recover_voltage",
|
|
&fuelgauge->battery_data->sw_v_empty_recover_vol);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading sw_v_empty_recover_vol %d\n",
|
|
__func__, ret);
|
|
fuelgauge->battery_data->sw_v_empty_recover_vol = 3480;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,vbat_ovp",
|
|
&fuelgauge->battery_data->vbat_ovp);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading vbat_ovp %d\n",
|
|
__func__, ret);
|
|
fuelgauge->battery_data->vbat_ovp = 4400;
|
|
}
|
|
|
|
pr_info("%s : SW V Empty (%d)mV, SW V Empty recover (%d)mV, CISD V_Alarm (%d)mV, Vbat OVP (%d)mV \n",
|
|
__func__,
|
|
fuelgauge->battery_data->sw_v_empty_vol,
|
|
fuelgauge->battery_data->sw_v_empty_recover_vol,
|
|
fuelgauge->battery_data->sw_v_empty_vol_cisd,
|
|
fuelgauge->battery_data->vbat_ovp);
|
|
}
|
|
|
|
fuelgauge->pdata->jig_gpio = of_get_named_gpio(np, "fuelgauge,jig_gpio", 0);
|
|
if (fuelgauge->pdata->jig_gpio < 0) {
|
|
pr_err("%s error reading jig_gpio = %d\n",
|
|
__func__, fuelgauge->pdata->jig_gpio);
|
|
fuelgauge->pdata->jig_gpio = 0;
|
|
} else {
|
|
fuelgauge->pdata->jig_irq = gpio_to_irq(fuelgauge->pdata->jig_gpio);
|
|
}
|
|
/*
|
|
if (fuelgauge->pdata->jig_gpio) {
|
|
ret = of_property_read_u32(np, "fuelgauge,jig_low_active",
|
|
&fuelgauge->pdata->jig_low_active);
|
|
|
|
if (ret < 0) {
|
|
pr_err("%s error reading jig_low_active %d\n", __func__, ret);
|
|
fuelgauge->pdata->jig_low_active = 0;
|
|
}
|
|
}
|
|
*/
|
|
ret = of_property_read_u32(np, "fuelgauge,fg_resistor",
|
|
&fuelgauge->fg_resistor);
|
|
if (ret < 0) {
|
|
pr_err("%s error reading fg_resistor %d\n",
|
|
__func__, ret);
|
|
fuelgauge->fg_resistor = 1;
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_EN_OOPS)
|
|
/* todo cap redesign */
|
|
#endif
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,capacity",
|
|
&fuelgauge->battery_data->Capacity);
|
|
if (ret < 0)
|
|
pr_err("%s error reading Capacity %d\n",
|
|
__func__, ret);
|
|
|
|
ret = of_property_read_u32(np, "fuelgauge,ttf_capacity",
|
|
&fuelgauge->ttf_capacity);
|
|
if (ret < 0)
|
|
pr_err("%s error reading ttf_capacity %d\n",
|
|
__func__, ret);
|
|
|
|
p = of_get_property(np, "fuelgauge,cv_data", &len);
|
|
if (p) {
|
|
fuelgauge->cv_data = kzalloc(len, GFP_KERNEL);
|
|
fuelgauge->cv_data_lenth = len / sizeof(struct cv_slope);
|
|
pr_err("%s len: %ld, lenth: %d, %d\n",
|
|
__func__, sizeof(int) * len, len, fuelgauge->cv_data_lenth);
|
|
ret = of_property_read_u32_array(np, "fuelgauge,cv_data",
|
|
(u32 *)fuelgauge->cv_data, len/sizeof(u32));
|
|
|
|
if (ret) {
|
|
pr_err("%s failed to read fuelgauge->cv_data: %d\n",
|
|
__func__, ret);
|
|
kfree(fuelgauge->cv_data);
|
|
fuelgauge->cv_data = NULL;
|
|
}
|
|
} else {
|
|
pr_err("%s there is not cv_data\n", __func__);
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_BATTERY_AGE_FORECAST)
|
|
ret = of_property_read_u32(np, "battery,full_condition_soc",
|
|
&fuelgauge->pdata->full_condition_soc);
|
|
if (ret) {
|
|
fuelgauge->pdata->full_condition_soc = 93;
|
|
pr_info("%s : Full condition soc is Empty\n", __func__);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* get battery_params node for reg init */
|
|
np = of_find_node_by_name(of_node_get(np), "battery_params");
|
|
if (np == NULL) {
|
|
PINFO("Cannot find child node \"battery_params\"\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* get battery_id */
|
|
if (of_property_read_u32(np, "battery,id", &battery_id) < 0)
|
|
PINFO("not battery,id property\n");
|
|
PINFO("battery id = %d\n", battery_id);
|
|
|
|
/* vbat measure point */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "is_read_vpack");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.is_read_vpack, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <0x%x>\n", prop_name, fuelgauge->info.is_read_vpack);
|
|
|
|
/* get battery_table */
|
|
for (i = DISCHARGE_TABLE; i < TABLE_MAX; i++) {
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE,
|
|
"battery%d,%s%d", battery_id, "battery_table", i);
|
|
|
|
ret = of_property_read_u32_array(np, prop_name, table, 24);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
}
|
|
for (j = 0; j <= FG_TABLE_LEN; j++) {
|
|
fuelgauge->info.battery_table[i][j] = table[j];
|
|
PINFO("%s = <table[%d][%d] 0x%x>\n", prop_name, i, j, table[j]);
|
|
}
|
|
}
|
|
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE,
|
|
"battery%d,%s%d", battery_id, "battery_table", i);
|
|
|
|
ret = of_property_read_u32_array(np, prop_name, table, 16);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
}
|
|
for (j = 0; j <= FG_ADD_TABLE_LEN; j++) {
|
|
fuelgauge->info.battery_table[i][j] = table[j];
|
|
PINFO("%s = <table[%d][%d] 0x%x>\n", prop_name, i, j, table[j]);
|
|
}
|
|
|
|
/* get rce */
|
|
for (i = 0; i < 3; i++) {
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "rce_value");
|
|
ret = of_property_read_u32_array(np, prop_name, rce_value, 3);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
}
|
|
fuelgauge->info.rce_value[i] = rce_value[i];
|
|
}
|
|
PINFO("%s = <0x%x 0x%x 0x%x>\n", prop_name, rce_value[0], rce_value[1], rce_value[2]);
|
|
|
|
/* get dtcd_value */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "dtcd_value");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.dtcd_value, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <0x%x>\n", prop_name, fuelgauge->info.dtcd_value);
|
|
|
|
/* get rs_value */
|
|
for (i = 0; i < 5; i++) {
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "rs_value");
|
|
ret = of_property_read_u32_array(np, prop_name, rs_value, 5);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
}
|
|
fuelgauge->info.rs_value[i] = rs_value[i];
|
|
}
|
|
PINFO("%s = <0x%x 0x%x 0x%x 0x%x 0x%x>\n", prop_name, rs_value[0], rs_value[1], rs_value[2], rs_value[3], rs_value[4]);
|
|
|
|
/* get vit_period */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "vit_period");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.vit_period, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <0x%x>\n", prop_name, fuelgauge->info.vit_period);
|
|
|
|
/* get mix_value */
|
|
for (i = 0; i < 2; i++) {
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "mix_value");
|
|
ret = of_property_read_u32_array(np, prop_name, mix_value, 2);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
}
|
|
fuelgauge->info.mix_value[i] = mix_value[i];
|
|
}
|
|
PINFO("%s = <0x%x 0x%x>\n", prop_name, mix_value[0], mix_value[1]);
|
|
|
|
/* battery_type */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "battery_type");
|
|
ret = of_property_read_u32_array(np, prop_name, battery_type, 3);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.batt_v_max = battery_type[0];
|
|
fuelgauge->info.min_cap = battery_type[1];
|
|
fuelgauge->info.cap = battery_type[2];
|
|
fuelgauge->info.maxcap = battery_type[2];
|
|
if (fuelgauge->battery_data->Capacity == 0)
|
|
fuelgauge->battery_data->Capacity = fuelgauge->info.maxcap / 2;
|
|
|
|
PINFO("%s = <%d %d 0x%x>\n", prop_name,
|
|
fuelgauge->info.batt_v_max, fuelgauge->info.min_cap, fuelgauge->info.cap);
|
|
|
|
#ifdef ENABLE_BATT_LONG_LIFE
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "v_max_table");
|
|
ret = of_property_read_u32_array(np, prop_name, v_max_table, fuelgauge->pdata->num_age_step);
|
|
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
|
|
for (i = 0; i < fuelgauge->pdata->num_age_step; i++) {
|
|
fuelgauge->info.v_max_table[i] = fuelgauge->info.battery_table[DISCHARGE_TABLE][FG_TABLE_LEN-1];
|
|
PINFO("%s = <v_max_table[%d] 0x%x>\n", prop_name, i, fuelgauge->info.v_max_table[i]);
|
|
}
|
|
} else {
|
|
for (i = 0; i < fuelgauge->pdata->num_age_step; i++) {
|
|
fuelgauge->info.v_max_table[i] = v_max_table[i];
|
|
PINFO("%s = <v_max_table[%d] 0x%x>\n", prop_name, i, fuelgauge->info.v_max_table[i]);
|
|
}
|
|
}
|
|
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "q_max_table");
|
|
ret = of_property_read_u32_array(np, prop_name, q_max_table, fuelgauge->pdata->num_age_step);
|
|
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
|
|
for (i = 0; i < fuelgauge->pdata->num_age_step; i++) {
|
|
fuelgauge->info.q_max_table[i] = fuelgauge->info.cap;
|
|
PINFO("%s = <q_max_table[%d] 0x%x>\n", prop_name, i, fuelgauge->info.q_max_table[i]);
|
|
}
|
|
} else {
|
|
for (i = 0; i < fuelgauge->pdata->num_age_step; i++) {
|
|
fuelgauge->info.q_max_table[i] = q_max_table[i];
|
|
PINFO("%s = <q_max_table[%d] 0x%x>\n", prop_name, i, fuelgauge->info.q_max_table[i]);
|
|
}
|
|
}
|
|
fuelgauge->chg_full_soc = fuelgauge->pdata->age_data[0].full_condition_soc;
|
|
fuelgauge->info.v_max_now = fuelgauge->info.v_max_table[0];
|
|
fuelgauge->info.q_max_now = fuelgauge->info.q_max_table[0];
|
|
PINFO("%s = <v_max_now = 0x%x>, <q_max_now = 0x%x>, <chg_full_soc = %d>\n", prop_name, fuelgauge->info.v_max_now, fuelgauge->info.q_max_now, fuelgauge->chg_full_soc);
|
|
#endif
|
|
|
|
/* MISC */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "misc");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.misc, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <0x%x>\n", prop_name, fuelgauge->info.misc);
|
|
|
|
/* V_ALARM */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "v_alarm");
|
|
ret = of_property_read_u32_array(np, prop_name, v_alarm, 2);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.value_v_alarm = v_alarm[0];
|
|
fuelgauge->info.value_v_alarm_hys = v_alarm[1];
|
|
PINFO("%s = <%d %d>\n", prop_name, fuelgauge->info.value_v_alarm, fuelgauge->info.value_v_alarm_hys);
|
|
|
|
/* TOP OFF SOC */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "topoff_soc");
|
|
ret = of_property_read_u32_array(np, prop_name, topoff_soc, 3);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.enable_topoff_soc = topoff_soc[0];
|
|
fuelgauge->info.topoff_soc = topoff_soc[1];
|
|
fuelgauge->info.top_off = topoff_soc[2];
|
|
|
|
PINFO("%s = <%d %d %d>\n", prop_name,
|
|
fuelgauge->info.enable_topoff_soc, fuelgauge->info.topoff_soc, fuelgauge->info.top_off);
|
|
|
|
/* SOC cycle cfg */
|
|
snprintf (prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "cycle_cfg");
|
|
ret = of_property_read_u32_array(np, prop_name, cycle_cfg, 3);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.cycle_high_limit = cycle_cfg[0];
|
|
fuelgauge->info.cycle_low_limit = cycle_cfg[1];
|
|
fuelgauge->info.cycle_limit_cntl = cycle_cfg[2];
|
|
|
|
PINFO("%s = <%d %d %d>\n", prop_name,
|
|
fuelgauge->info.cycle_high_limit, fuelgauge->info.cycle_low_limit, fuelgauge->info.cycle_limit_cntl);
|
|
|
|
/* v_offset_cancel */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "v_offset_cancel");
|
|
ret = of_property_read_u32_array(np, prop_name, v_offset_cancel, 4);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.enable_v_offset_cancel_p = v_offset_cancel[0];
|
|
fuelgauge->info.enable_v_offset_cancel_n = v_offset_cancel[1];
|
|
fuelgauge->info.v_offset_cancel_level = v_offset_cancel[2];
|
|
fuelgauge->info.v_offset_cancel_mohm = v_offset_cancel[3];
|
|
|
|
PINFO("%s = <%d %d %d %d>\n", prop_name,
|
|
fuelgauge->info.enable_v_offset_cancel_p, fuelgauge->info.enable_v_offset_cancel_n, fuelgauge->info.v_offset_cancel_level, fuelgauge->info.v_offset_cancel_mohm);
|
|
|
|
/* VOL & CURR CAL */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "volt_cal");
|
|
ret = of_property_read_u32_array(np, prop_name, volt_cal, 2);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.volt_cal[0] = volt_cal[0];
|
|
fuelgauge->info.volt_cal[1] = volt_cal[1];
|
|
PINFO("%s = <0x%x 0x%x>\n", prop_name, fuelgauge->info.volt_cal[0], fuelgauge->info.volt_cal[1]);
|
|
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "curr_offset");
|
|
ret = of_property_read_u32_array(np, prop_name, curr_offset, 7);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
} else {
|
|
fuelgauge->info.en_auto_i_offset = curr_offset[0];
|
|
fuelgauge->info.ecv_i_off = curr_offset[1];
|
|
fuelgauge->info.csp_i_off = curr_offset[2];
|
|
fuelgauge->info.csn_i_off = curr_offset[3];
|
|
fuelgauge->info.dp_ecv_i_off = curr_offset[4];
|
|
fuelgauge->info.dp_csp_i_off = curr_offset[5];
|
|
fuelgauge->info.dp_csn_i_off = curr_offset[6];
|
|
}
|
|
PINFO("%s = <%d arg : 0x%x 0x%x 0x%x, dp : 0x%x 0x%x 0x%x>\n", prop_name,
|
|
fuelgauge->info.en_auto_i_offset, fuelgauge->info.ecv_i_off, fuelgauge->info.csp_i_off, fuelgauge->info.csn_i_off,
|
|
fuelgauge->info.dp_ecv_i_off, fuelgauge->info.dp_csp_i_off, fuelgauge->info.dp_csn_i_off);
|
|
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "curr_cal");
|
|
ret = of_property_read_u32_array(np, prop_name, curr_cal, 6);
|
|
if (ret < 0) {
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
} else {
|
|
fuelgauge->info.ecv_i_slo = curr_cal[0];
|
|
fuelgauge->info.csp_i_slo = curr_cal[1];
|
|
fuelgauge->info.csn_i_slo = curr_cal[2];
|
|
fuelgauge->info.dp_ecv_i_slo = curr_cal[3];
|
|
fuelgauge->info.dp_csp_i_slo = curr_cal[4];
|
|
fuelgauge->info.dp_csn_i_slo = curr_cal[5];
|
|
}
|
|
PINFO("%s = <arg : 0x%x 0x%x 0x%x, dp : 0x%x 0x%x 0x%x>\n", prop_name,
|
|
fuelgauge->info.ecv_i_slo, fuelgauge->info.csp_i_slo, fuelgauge->info.csn_i_slo,
|
|
fuelgauge->info.dp_ecv_i_slo, fuelgauge->info.dp_csp_i_slo, fuelgauge->info.dp_csn_i_slo);
|
|
|
|
#ifdef ENABLE_FULL_OFFSET
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "full_offset");
|
|
ret = of_property_read_u32_array(np, prop_name, full_offset, 5);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.full_offset_enable = full_offset[0];
|
|
fuelgauge->info.full_offset_margin = full_offset[1];
|
|
fuelgauge->info.full_extra_offset = full_offset[2];
|
|
fuelgauge->info.aux_stat_base = full_offset[3];
|
|
fuelgauge->info.aux_stat_check = full_offset[4];
|
|
|
|
PINFO("%s = <%d %d %d 0x%x 0x%x>\n", prop_name,
|
|
fuelgauge->info.full_offset_enable,
|
|
fuelgauge->info.full_offset_margin, fuelgauge->info.full_extra_offset,
|
|
fuelgauge->info.aux_stat_base, fuelgauge->info.aux_stat_check);
|
|
#endif
|
|
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "coeff");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.coeff, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <%x>\n", prop_name, fuelgauge->info.coeff);
|
|
|
|
/* temp_std */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "temp_std");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.temp_std, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <%d>\n", prop_name, fuelgauge->info.temp_std);
|
|
|
|
/* temp_volcal */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "temp_volcal");
|
|
ret = of_property_read_u32_array(np, prop_name, temp_volcal, 3);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.en_fg_temp_volcal = temp_volcal[0];
|
|
fuelgauge->info.fg_temp_volcal_denom = temp_volcal[1];
|
|
fuelgauge->info.fg_temp_volcal_fact = temp_volcal[2];
|
|
PINFO("%s = <%d, %d, %d>\n", prop_name,
|
|
fuelgauge->info.en_fg_temp_volcal, fuelgauge->info.fg_temp_volcal_denom, fuelgauge->info.fg_temp_volcal_fact);
|
|
|
|
/* temp_offset */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "temp_offset");
|
|
ret = of_property_read_u32_array(np, prop_name, temp_offset, 6);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.en_high_fg_temp_offset = temp_offset[0];
|
|
fuelgauge->info.high_fg_temp_offset_denom = temp_offset[1];
|
|
fuelgauge->info.high_fg_temp_offset_fact = temp_offset[2];
|
|
fuelgauge->info.en_low_fg_temp_offset = temp_offset[3];
|
|
fuelgauge->info.low_fg_temp_offset_denom = temp_offset[4];
|
|
fuelgauge->info.low_fg_temp_offset_fact = temp_offset[5];
|
|
PINFO("%s = <%d, %d, %d, %d, %d, %d>\n", prop_name,
|
|
fuelgauge->info.en_high_fg_temp_offset,
|
|
fuelgauge->info.high_fg_temp_offset_denom, fuelgauge->info.high_fg_temp_offset_fact,
|
|
fuelgauge->info.en_low_fg_temp_offset,
|
|
fuelgauge->info.low_fg_temp_offset_denom, fuelgauge->info.low_fg_temp_offset_fact);
|
|
|
|
/* temp_calc */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "temp_cal");
|
|
ret = of_property_read_u32_array(np, prop_name, temp_cal, 10);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.en_high_fg_temp_cal = temp_cal[0];
|
|
fuelgauge->info.high_fg_temp_p_cal_denom = temp_cal[1];
|
|
fuelgauge->info.high_fg_temp_p_cal_fact = temp_cal[2];
|
|
fuelgauge->info.high_fg_temp_n_cal_denom = temp_cal[3];
|
|
fuelgauge->info.high_fg_temp_n_cal_fact = temp_cal[4];
|
|
fuelgauge->info.en_low_fg_temp_cal = temp_cal[5];
|
|
fuelgauge->info.low_fg_temp_p_cal_denom = temp_cal[6];
|
|
fuelgauge->info.low_fg_temp_p_cal_fact = temp_cal[7];
|
|
fuelgauge->info.low_fg_temp_n_cal_denom = temp_cal[8];
|
|
fuelgauge->info.low_fg_temp_n_cal_fact = temp_cal[9];
|
|
PINFO("%s = <%d, %d, %d, %d, %d, %d, %d, %d, %d, %d>\n", prop_name,
|
|
fuelgauge->info.en_high_fg_temp_cal,
|
|
fuelgauge->info.high_fg_temp_p_cal_denom, fuelgauge->info.high_fg_temp_p_cal_fact,
|
|
fuelgauge->info.high_fg_temp_n_cal_denom, fuelgauge->info.high_fg_temp_n_cal_fact,
|
|
fuelgauge->info.en_low_fg_temp_cal,
|
|
fuelgauge->info.low_fg_temp_p_cal_denom, fuelgauge->info.low_fg_temp_p_cal_fact,
|
|
fuelgauge->info.low_fg_temp_n_cal_denom, fuelgauge->info.low_fg_temp_n_cal_fact);
|
|
|
|
/* ext_temp_calc */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "ext_temp_cal");
|
|
ret = of_property_read_u32_array(np, prop_name, ext_temp_cal, 10);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.en_high_temp_cal = ext_temp_cal[0];
|
|
fuelgauge->info.high_temp_p_cal_denom = ext_temp_cal[1];
|
|
fuelgauge->info.high_temp_p_cal_fact = ext_temp_cal[2];
|
|
fuelgauge->info.high_temp_n_cal_denom = ext_temp_cal[3];
|
|
fuelgauge->info.high_temp_n_cal_fact = ext_temp_cal[4];
|
|
fuelgauge->info.en_low_temp_cal = ext_temp_cal[5];
|
|
fuelgauge->info.low_temp_p_cal_denom = ext_temp_cal[6];
|
|
fuelgauge->info.low_temp_p_cal_fact = ext_temp_cal[7];
|
|
fuelgauge->info.low_temp_n_cal_denom = ext_temp_cal[8];
|
|
fuelgauge->info.low_temp_n_cal_fact = ext_temp_cal[9];
|
|
PINFO("%s = <%d, %d, %d, %d, %d, %d, %d, %d, %d, %d>\n", prop_name,
|
|
fuelgauge->info.en_high_temp_cal,
|
|
fuelgauge->info.high_temp_p_cal_denom, fuelgauge->info.high_temp_p_cal_fact,
|
|
fuelgauge->info.high_temp_n_cal_denom, fuelgauge->info.high_temp_n_cal_fact,
|
|
fuelgauge->info.en_low_temp_cal,
|
|
fuelgauge->info.low_temp_p_cal_denom, fuelgauge->info.low_temp_p_cal_fact,
|
|
fuelgauge->info.low_temp_n_cal_denom, fuelgauge->info.low_temp_n_cal_fact);
|
|
|
|
/* tem poff level */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "tem_poff");
|
|
ret = of_property_read_u32_array(np, prop_name, set_temp_poff, 4);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.n_tem_poff = set_temp_poff[0];
|
|
fuelgauge->info.n_tem_poff_offset = set_temp_poff[1];
|
|
fuelgauge->info.l_tem_poff = set_temp_poff[2];
|
|
fuelgauge->info.l_tem_poff_offset = set_temp_poff[3];
|
|
|
|
PINFO("%s = <%d, %d, %d, %d>\n",
|
|
prop_name,
|
|
fuelgauge->info.n_tem_poff, fuelgauge->info.n_tem_poff_offset,
|
|
fuelgauge->info.l_tem_poff, fuelgauge->info.l_tem_poff_offset);
|
|
|
|
/* arsm setting */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "arsm");
|
|
ret = of_property_read_u32_array(np, prop_name, arsm, 4);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.arsm[0] = arsm[0];
|
|
fuelgauge->info.arsm[1] = arsm[1];
|
|
fuelgauge->info.arsm[2] = arsm[2];
|
|
fuelgauge->info.arsm[3] = arsm[3];
|
|
|
|
PINFO("%s = <%d, %d, %d, %d>\n",
|
|
prop_name,
|
|
fuelgauge->info.arsm[0], fuelgauge->info.arsm[1],
|
|
fuelgauge->info.arsm[2], fuelgauge->info.arsm[3]);
|
|
|
|
/* age cntl value */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "age_cntl");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.age_cntl, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <0x%x>\n", prop_name, fuelgauge->info.age_cntl);
|
|
|
|
/* tcal_ioff setting */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "tcal_ioff");
|
|
ret = of_property_read_u32_array(np, prop_name, tcal_ioff, 2);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
fuelgauge->info.tcal_ioff[0] = tcal_ioff[0];
|
|
fuelgauge->info.tcal_ioff[1] = tcal_ioff[1];
|
|
|
|
PINFO("%s = <0x%x, 0x%x>\n",
|
|
prop_name,
|
|
fuelgauge->info.tcal_ioff[0], fuelgauge->info.tcal_ioff[1]);
|
|
|
|
/* batt data version */
|
|
snprintf(prop_name, PROPERTY_NAME_SIZE, "battery%d,%s", battery_id, "data_ver");
|
|
ret = of_property_read_u32_array(np, prop_name, &fuelgauge->info.data_ver, 1);
|
|
if (ret < 0)
|
|
PINFO("Can get prop %s (%d)\n", prop_name, ret);
|
|
PINFO("%s = <%d>\n", prop_name, fuelgauge->info.data_ver);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
ssize_t sm5713_show_attrs(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
|
|
ssize_t sm5713_store_attrs(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count);
|
|
#define sm5713_ATTR(_name) \
|
|
{ \
|
|
.attr = {.name = #_name, .mode = 0664}, \
|
|
.show = sm5713_show_attrs, \
|
|
.store = sm5713_store_attrs, \
|
|
}
|
|
enum {
|
|
CHIP_ID = 0,
|
|
DATA,
|
|
DATA_1
|
|
};
|
|
static struct device_attribute sm5713_attrs[] = {
|
|
sm5713_ATTR(chip_id),
|
|
sm5713_ATTR(data),
|
|
sm5713_ATTR(data_1),
|
|
};
|
|
static int sm5713_create_attrs(struct device *dev)
|
|
{
|
|
int i, rc;
|
|
|
|
for (i = 0; i < (int)ARRAY_SIZE(sm5713_attrs); i++) {
|
|
rc = device_create_file(dev, &sm5713_attrs[i]);
|
|
if (rc)
|
|
goto create_attrs_failed;
|
|
}
|
|
return rc;
|
|
|
|
create_attrs_failed:
|
|
dev_err(dev, "%s: failed (%d)\n", __func__, rc);
|
|
while (i--)
|
|
device_remove_file(dev, &sm5713_attrs[i]);
|
|
return rc;
|
|
}
|
|
|
|
ssize_t sm5713_show_attrs(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
struct sm5713_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy);
|
|
const ptrdiff_t offset = attr - sm5713_attrs;
|
|
int i = 0;
|
|
u16 data;
|
|
|
|
switch (offset) {
|
|
case CHIP_ID:
|
|
case DATA:
|
|
case DATA_1:
|
|
data = sm5713_read_word(fuelgauge->i2c, fuelgauge->read_reg);
|
|
i += scnprintf(buf + i, PAGE_SIZE - i,
|
|
"0x%02x : 0x%04x\n", fuelgauge->read_reg, data);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
ssize_t sm5713_store_attrs(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
struct sm5713_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy);
|
|
const ptrdiff_t offset = attr - sm5713_attrs;
|
|
int ret = 0;
|
|
int x, y;
|
|
|
|
switch (offset) {
|
|
case CHIP_ID:
|
|
ret = count;
|
|
break;
|
|
case DATA:
|
|
if (sscanf(buf, "0x%8x 0x%8x", &x, &y) == 2) {
|
|
if (x >= 0x00 && x <= 0xFF) {
|
|
u8 addr = x;
|
|
u16 data = y;
|
|
|
|
if (sm5713_write_word(fuelgauge->i2c, addr, data) < 0) {
|
|
dev_info(fuelgauge->dev,
|
|
"%s: addr: 0x%x write fail\n", __func__, addr);
|
|
}
|
|
} else {
|
|
dev_info(fuelgauge->dev,
|
|
"%s: addr: 0x%x is wrong\n", __func__, x);
|
|
}
|
|
}
|
|
ret = count;
|
|
break;
|
|
case DATA_1:
|
|
if (sscanf(buf, "0x%8x", &x) == 1) {
|
|
fuelgauge->read_reg = x;
|
|
}
|
|
ret = count;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct power_supply_desc sm5713_fuelgauge_power_supply_desc = {
|
|
.name = "sm5713-fuelgauge",
|
|
.type = POWER_SUPPLY_TYPE_UNKNOWN,
|
|
.properties = sm5713_fuelgauge_props,
|
|
.num_properties = ARRAY_SIZE(sm5713_fuelgauge_props),
|
|
.get_property = sm5713_fg_get_property,
|
|
.set_property = sm5713_fg_set_property,
|
|
};
|
|
|
|
static int sm5713_fuelgauge_probe(struct platform_device *pdev)
|
|
{
|
|
struct sm5713_dev *sm5713 = dev_get_drvdata(pdev->dev.parent);
|
|
struct sm5713_platform_data *pdata = dev_get_platdata(sm5713->dev);
|
|
struct sm5713_fuelgauge_data *fuelgauge;
|
|
sec_fuelgauge_platform_data_t *fuelgauge_data;
|
|
/* struct power_supply_config fuelgauge_cfg = {}; */
|
|
struct power_supply_config psy_fg = {};
|
|
int ret = 0;
|
|
union power_supply_propval raw_soc_val;
|
|
|
|
pr_info("%s: SM5713 Fuelgauge Driver Loading\n", __func__);
|
|
|
|
fuelgauge = kzalloc(sizeof(*fuelgauge), GFP_KERNEL);
|
|
if (!fuelgauge)
|
|
return -ENOMEM;
|
|
|
|
fuelgauge_data = kzalloc(sizeof(sec_fuelgauge_platform_data_t), GFP_KERNEL);
|
|
if (!fuelgauge_data) {
|
|
ret = -ENOMEM;
|
|
goto err_free;
|
|
}
|
|
|
|
mutex_init(&fuelgauge->fg_lock);
|
|
|
|
fuelgauge->dev = &pdev->dev;
|
|
fuelgauge->pdata = fuelgauge_data;
|
|
fuelgauge->i2c = sm5713->fuelgauge;
|
|
/* fuelgauge->pmic = sm5713->i2c; */
|
|
fuelgauge->sm5713_pdata = pdata;
|
|
|
|
fuelgauge->pmic_rev = sm5713->pmic_rev;
|
|
fuelgauge->vender_id = sm5713->vender_id;
|
|
|
|
#if defined(ENABLE_BATT_LONG_LIFE)
|
|
temp_parse_dt(fuelgauge);
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF)
|
|
fuelgauge->battery_data = kzalloc(sizeof(struct battery_data_t),
|
|
GFP_KERNEL);
|
|
if (!fuelgauge->battery_data) {
|
|
pr_err("Failed to allocate memory\n");
|
|
ret = -ENOMEM;
|
|
goto err_pdata_free;
|
|
}
|
|
ret = sm5713_fuelgauge_parse_dt(fuelgauge);
|
|
if (ret < 0) {
|
|
pr_err("%s not found charger dt! ret[%d]\n",
|
|
__func__, ret);
|
|
}
|
|
#endif
|
|
|
|
/* initialize value */
|
|
fuelgauge->isjigmoderealvbat = false;
|
|
|
|
platform_set_drvdata(pdev, fuelgauge);
|
|
|
|
(void) debugfs_create_file("sm5713-fuelgauge-regs",
|
|
S_IRUGO, NULL, (void *)fuelgauge, &sm5713_fuelgauge_debugfs_fops);
|
|
|
|
if (!sm5713_fg_init(fuelgauge, false)) {
|
|
pr_err("%s: Failed to Initialize Fuelgauge\n", __func__);
|
|
goto err_data_free;
|
|
}
|
|
|
|
fuelgauge->capacity_max = fuelgauge->pdata->capacity_max;
|
|
raw_soc_val.intval = sm5713_get_soc(fuelgauge);
|
|
|
|
if (raw_soc_val.intval > fuelgauge->capacity_max)
|
|
sm5713_fg_calculate_dynamic_scale(fuelgauge, 100);
|
|
|
|
/* SW/HW init code. SW/HW V Empty mode must be opposite ! */
|
|
fuelgauge->info.temperature = 300; /* default value */
|
|
pr_info("%s: SW/HW V empty init \n", __func__);
|
|
sm5713_fg_set_vempty(fuelgauge, VEMPTY_MODE_HW);
|
|
|
|
psy_fg.drv_data = fuelgauge;
|
|
psy_fg.supplied_to = sm5713_fg_supplied_to;
|
|
psy_fg.num_supplicants = ARRAY_SIZE(sm5713_fg_supplied_to),
|
|
|
|
fuelgauge->psy_fg = power_supply_register(&pdev->dev, &sm5713_fuelgauge_power_supply_desc, &psy_fg);
|
|
if (!fuelgauge->psy_fg) {
|
|
dev_err(&pdev->dev, "%s: failed to power supply fg register", __func__);
|
|
goto err_data_free;
|
|
}
|
|
/*
|
|
fuelgauge->psy_fg.desc->name = "sm5713-fuelgauge";
|
|
fuelgauge->psy_fg.desc->type = POWER_SUPPLY_TYPE_UNKNOWN;
|
|
fuelgauge->psy_fg.desc->get_property = sm5713_fg_get_property;
|
|
fuelgauge->psy_fg.desc->set_property = sm5713_fg_set_property;
|
|
fuelgauge->psy_fg.desc->properties = sm5713_fuelgauge_props;
|
|
fuelgauge->psy_fg.desc->num_properties = ARRAY_SIZE(sm5713_fuelgauge_props);
|
|
|
|
ret = power_supply_register(&pdev->dev, &fuelgauge->psy_fg);
|
|
|
|
if (ret) {
|
|
pr_err("%s: Failed to Register psy_fg\n", __func__);
|
|
goto err_data_free;
|
|
}
|
|
*/
|
|
fuelgauge->fg_irq = pdata->irq_base + SM5713_FG_IRQ_INT_LOW_VOLTAGE;
|
|
pr_info("[%s]IRQ_BASE(%d) FG_IRQ(%d)\n",
|
|
__func__, pdata->irq_base, fuelgauge->fg_irq);
|
|
|
|
fuelgauge->is_fuel_alerted = false;
|
|
if (fuelgauge->pdata->fuel_alert_soc >= 0) {
|
|
if (sm5713_fg_fuelalert_init(fuelgauge,
|
|
fuelgauge->pdata->fuel_alert_soc)) {
|
|
wake_lock_init(&fuelgauge->fuel_alert_wake_lock,
|
|
WAKE_LOCK_SUSPEND, "fuel_alerted");
|
|
if (fuelgauge->fg_irq) {
|
|
INIT_DELAYED_WORK(&fuelgauge->isr_work, sm5713_fg_isr_work);
|
|
|
|
ret = request_threaded_irq(fuelgauge->fg_irq,
|
|
NULL, sm5713_fg_irq_thread,
|
|
0,
|
|
"fuelgauge-irq", fuelgauge);
|
|
if (ret) {
|
|
pr_err("%s: Failed to Request IRQ\n", __func__);
|
|
goto err_supply_unreg;
|
|
}
|
|
}
|
|
} else {
|
|
pr_err("%s: Failed to Initialize Fuel-alert\n",
|
|
__func__);
|
|
goto err_supply_unreg;
|
|
}
|
|
}
|
|
|
|
fuelgauge->initial_update_of_soc = true;
|
|
ret = sm5713_create_attrs(&fuelgauge->psy_fg->dev);
|
|
if (ret) {
|
|
dev_err(sm5713->dev,
|
|
"%s : Failed to create_attrs\n", __func__);
|
|
}
|
|
|
|
pr_info("%s: SM5713 Fuelgauge Driver Loaded\n", __func__);
|
|
return 0;
|
|
|
|
err_supply_unreg:
|
|
power_supply_unregister(fuelgauge->psy_fg);
|
|
err_data_free:
|
|
#if defined(CONFIG_OF)
|
|
kfree(fuelgauge->battery_data);
|
|
#endif
|
|
err_pdata_free:
|
|
kfree(fuelgauge_data);
|
|
mutex_destroy(&fuelgauge->fg_lock);
|
|
err_free:
|
|
kfree(fuelgauge);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5713_fuelgauge_remove(struct platform_device *pdev)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge =
|
|
platform_get_drvdata(pdev);
|
|
|
|
if (fuelgauge->pdata->fuel_alert_soc >= 0)
|
|
wake_lock_destroy(&fuelgauge->fuel_alert_wake_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5713_fuelgauge_suspend(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sm5713_fuelgauge_resume(struct device *dev)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = dev_get_drvdata(dev);
|
|
|
|
fuelgauge->initial_update_of_soc = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sm5713_fuelgauge_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct sm5713_fuelgauge_data *fuelgauge = platform_get_drvdata(pdev);
|
|
|
|
pr_info("%s: ++\n", __func__);
|
|
|
|
if (fuelgauge->using_hw_vempty)
|
|
sm5713_fg_set_vempty(fuelgauge, false);
|
|
#ifdef ENABLE_SM5713_MQ_FUNCTION
|
|
sm5713_meas_mq_suspend(fuelgauge);
|
|
#endif
|
|
sm5713_write_word(fuelgauge->i2c, SM5713_FG_REG_MIX_RATE, 0x0F03);
|
|
|
|
pr_info("%s: --\n", __func__);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(sm5713_fuelgauge_pm_ops, sm5713_fuelgauge_suspend,
|
|
sm5713_fuelgauge_resume);
|
|
|
|
static struct platform_driver sm5713_fuelgauge_driver = {
|
|
.driver = {
|
|
.name = "sm5713-fuelgauge",
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_PM
|
|
.pm = &sm5713_fuelgauge_pm_ops,
|
|
#endif
|
|
},
|
|
.probe = sm5713_fuelgauge_probe,
|
|
.remove = sm5713_fuelgauge_remove,
|
|
.shutdown = sm5713_fuelgauge_shutdown,
|
|
};
|
|
|
|
static int __init sm5713_fuelgauge_init(void)
|
|
{
|
|
pr_info("%s: \n", __func__);
|
|
return platform_driver_register(&sm5713_fuelgauge_driver);
|
|
}
|
|
|
|
static void __exit sm5713_fuelgauge_exit(void)
|
|
{
|
|
platform_driver_unregister(&sm5713_fuelgauge_driver);
|
|
}
|
|
module_init(sm5713_fuelgauge_init);
|
|
module_exit(sm5713_fuelgauge_exit);
|
|
|
|
MODULE_DESCRIPTION("Samsung SM5713 Fuel Gauge Driver");
|
|
MODULE_AUTHOR("Samsung Electronics");
|
|
MODULE_LICENSE("GPL");
|