lineage_kernel_xcoverpro/drivers/acpi/acpica/dbxface.c

520 lines
14 KiB
C
Executable File

/*******************************************************************************
*
* Module Name: dbxface - AML Debugger external interfaces
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2017, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "amlcode.h"
#include "acdebug.h"
#include "acinterp.h"
#define _COMPONENT ACPI_CA_DEBUGGER
ACPI_MODULE_NAME("dbxface")
/* Local prototypes */
static acpi_status
acpi_db_start_command(struct acpi_walk_state *walk_state,
union acpi_parse_object *op);
#ifdef ACPI_OBSOLETE_FUNCTIONS
void acpi_db_method_end(struct acpi_walk_state *walk_state);
#endif
/*******************************************************************************
*
* FUNCTION: acpi_db_start_command
*
* PARAMETERS: walk_state - Current walk
* op - Current executing Op, from AML interpreter
*
* RETURN: Status
*
* DESCRIPTION: Enter debugger command loop
*
******************************************************************************/
static acpi_status
acpi_db_start_command(struct acpi_walk_state *walk_state,
union acpi_parse_object *op)
{
acpi_status status;
/* TBD: [Investigate] are there namespace locking issues here? */
/* acpi_ut_release_mutex (ACPI_MTX_NAMESPACE); */
/* Go into the command loop and await next user command */
acpi_gbl_method_executing = TRUE;
status = AE_CTRL_TRUE;
while (status == AE_CTRL_TRUE) {
/* Notify the completion of the command */
status = acpi_os_notify_command_complete();
if (ACPI_FAILURE(status)) {
goto error_exit;
}
/* Wait the readiness of the command */
status = acpi_os_wait_command_ready();
if (ACPI_FAILURE(status)) {
goto error_exit;
}
status =
acpi_db_command_dispatch(acpi_gbl_db_line_buf, walk_state,
op);
}
/* acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE); */
error_exit:
if (ACPI_FAILURE(status) && status != AE_CTRL_TERMINATE) {
ACPI_EXCEPTION((AE_INFO, status,
"While parsing/handling command line"));
}
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_db_signal_break_point
*
* PARAMETERS: walk_state - Current walk
*
* RETURN: Status
*
* DESCRIPTION: Called for AML_BREAKPOINT_OP
*
******************************************************************************/
void acpi_db_signal_break_point(struct acpi_walk_state *walk_state)
{
#ifndef ACPI_APPLICATION
if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) {
return;
}
#endif
/*
* Set the single-step flag. This will cause the debugger (if present)
* to break to the console within the AML debugger at the start of the
* next AML instruction.
*/
acpi_gbl_cm_single_step = TRUE;
acpi_os_printf("**break** Executed AML BreakPoint opcode\n");
}
/*******************************************************************************
*
* FUNCTION: acpi_db_single_step
*
* PARAMETERS: walk_state - Current walk
* op - Current executing op (from aml interpreter)
* opcode_class - Class of the current AML Opcode
*
* RETURN: Status
*
* DESCRIPTION: Called just before execution of an AML opcode.
*
******************************************************************************/
acpi_status
acpi_db_single_step(struct acpi_walk_state *walk_state,
union acpi_parse_object *op, u32 opcode_class)
{
union acpi_parse_object *next;
acpi_status status = AE_OK;
u32 original_debug_level;
union acpi_parse_object *display_op;
union acpi_parse_object *parent_op;
u32 aml_offset;
ACPI_FUNCTION_ENTRY();
#ifndef ACPI_APPLICATION
if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) {
return (AE_OK);
}
#endif
/* Check the abort flag */
if (acpi_gbl_abort_method) {
acpi_gbl_abort_method = FALSE;
return (AE_ABORT_METHOD);
}
aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
walk_state->parser_state.aml_start);
/* Check for single-step breakpoint */
if (walk_state->method_breakpoint &&
(walk_state->method_breakpoint <= aml_offset)) {
/* Check if the breakpoint has been reached or passed */
/* Hit the breakpoint, resume single step, reset breakpoint */
acpi_os_printf("***Break*** at AML offset %X\n", aml_offset);
acpi_gbl_cm_single_step = TRUE;
acpi_gbl_step_to_next_call = FALSE;
walk_state->method_breakpoint = 0;
}
/* Check for user breakpoint (Must be on exact Aml offset) */
else if (walk_state->user_breakpoint &&
(walk_state->user_breakpoint == aml_offset)) {
acpi_os_printf("***UserBreakpoint*** at AML offset %X\n",
aml_offset);
acpi_gbl_cm_single_step = TRUE;
acpi_gbl_step_to_next_call = FALSE;
walk_state->method_breakpoint = 0;
}
/*
* Check if this is an opcode that we are interested in --
* namely, opcodes that have arguments
*/
if (op->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
return (AE_OK);
}
switch (opcode_class) {
case AML_CLASS_UNKNOWN:
case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */
return (AE_OK);
default:
/* All other opcodes -- continue */
break;
}
/*
* Under certain debug conditions, display this opcode and its operands
*/
if ((acpi_gbl_db_output_to_file) ||
(acpi_gbl_cm_single_step) || (acpi_dbg_level & ACPI_LV_PARSE)) {
if ((acpi_gbl_db_output_to_file) ||
(acpi_dbg_level & ACPI_LV_PARSE)) {
acpi_os_printf
("\nAML Debug: Next AML Opcode to execute:\n");
}
/*
* Display this op (and only this op - zero out the NEXT field
* temporarily, and disable parser trace output for the duration of
* the display because we don't want the extraneous debug output)
*/
original_debug_level = acpi_dbg_level;
acpi_dbg_level &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS);
next = op->common.next;
op->common.next = NULL;
display_op = op;
parent_op = op->common.parent;
if (parent_op) {
if ((walk_state->control_state) &&
(walk_state->control_state->common.state ==
ACPI_CONTROL_PREDICATE_EXECUTING)) {
/*
* We are executing the predicate of an IF or WHILE statement
* Search upwards for the containing IF or WHILE so that the
* entire predicate can be displayed.
*/
while (parent_op) {
if ((parent_op->common.aml_opcode ==
AML_IF_OP)
|| (parent_op->common.aml_opcode ==
AML_WHILE_OP)) {
display_op = parent_op;
break;
}
parent_op = parent_op->common.parent;
}
} else {
while (parent_op) {
if ((parent_op->common.aml_opcode ==
AML_IF_OP)
|| (parent_op->common.aml_opcode ==
AML_ELSE_OP)
|| (parent_op->common.aml_opcode ==
AML_SCOPE_OP)
|| (parent_op->common.aml_opcode ==
AML_METHOD_OP)
|| (parent_op->common.aml_opcode ==
AML_WHILE_OP)) {
break;
}
display_op = parent_op;
parent_op = parent_op->common.parent;
}
}
}
/* Now we can display it */
#ifdef ACPI_DISASSEMBLER
acpi_dm_disassemble(walk_state, display_op, ACPI_UINT32_MAX);
#endif
if ((op->common.aml_opcode == AML_IF_OP) ||
(op->common.aml_opcode == AML_WHILE_OP)) {
if (walk_state->control_state->common.value) {
acpi_os_printf
("Predicate = [True], IF block was executed\n");
} else {
acpi_os_printf
("Predicate = [False], Skipping IF block\n");
}
} else if (op->common.aml_opcode == AML_ELSE_OP) {
acpi_os_printf
("Predicate = [False], ELSE block was executed\n");
}
/* Restore everything */
op->common.next = next;
acpi_os_printf("\n");
if ((acpi_gbl_db_output_to_file) ||
(acpi_dbg_level & ACPI_LV_PARSE)) {
acpi_os_printf("\n");
}
acpi_dbg_level = original_debug_level;
}
/* If we are not single stepping, just continue executing the method */
if (!acpi_gbl_cm_single_step) {
return (AE_OK);
}
/*
* If we are executing a step-to-call command,
* Check if this is a method call.
*/
if (acpi_gbl_step_to_next_call) {
if (op->common.aml_opcode != AML_INT_METHODCALL_OP) {
/* Not a method call, just keep executing */
return (AE_OK);
}
/* Found a method call, stop executing */
acpi_gbl_step_to_next_call = FALSE;
}
/*
* If the next opcode is a method call, we will "step over" it
* by default.
*/
if (op->common.aml_opcode == AML_INT_METHODCALL_OP) {
/* Force no more single stepping while executing called method */
acpi_gbl_cm_single_step = FALSE;
/*
* Set the breakpoint on/before the call, it will stop execution
* as soon as we return
*/
walk_state->method_breakpoint = 1; /* Must be non-zero! */
}
acpi_ex_exit_interpreter();
status = acpi_db_start_command(walk_state, op);
acpi_ex_enter_interpreter();
/* User commands complete, continue execution of the interrupted method */
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_initialize_debugger
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Init and start debugger
*
******************************************************************************/
acpi_status acpi_initialize_debugger(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_initialize_debugger);
/* Init globals */
acpi_gbl_db_buffer = NULL;
acpi_gbl_db_filename = NULL;
acpi_gbl_db_output_to_file = FALSE;
acpi_gbl_db_debug_level = ACPI_LV_VERBOSITY2;
acpi_gbl_db_console_debug_level = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES;
acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
acpi_gbl_db_opt_no_ini_methods = FALSE;
acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE);
if (!acpi_gbl_db_buffer) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
memset(acpi_gbl_db_buffer, 0, ACPI_DEBUG_BUFFER_SIZE);
/* Initial scope is the root */
acpi_gbl_db_scope_buf[0] = AML_ROOT_PREFIX;
acpi_gbl_db_scope_buf[1] = 0;
acpi_gbl_db_scope_node = acpi_gbl_root_node;
/* Initialize user commands loop */
acpi_gbl_db_terminate_loop = FALSE;
/*
* If configured for multi-thread support, the debug executor runs in
* a separate thread so that the front end can be in another address
* space, environment, or even another machine.
*/
if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
/* These were created with one unit, grab it */
status = acpi_os_initialize_debugger();
if (ACPI_FAILURE(status)) {
acpi_os_printf("Could not get debugger mutex\n");
return_ACPI_STATUS(status);
}
/* Create the debug execution thread to execute commands */
acpi_gbl_db_threads_terminated = FALSE;
status = acpi_os_execute(OSL_DEBUGGER_MAIN_THREAD,
acpi_db_execute_thread, NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not start debugger thread"));
acpi_gbl_db_threads_terminated = TRUE;
return_ACPI_STATUS(status);
}
} else {
acpi_gbl_db_thread_id = acpi_os_get_thread_id();
}
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_initialize_debugger)
/*******************************************************************************
*
* FUNCTION: acpi_terminate_debugger
*
* PARAMETERS: None
*
* RETURN: None
*
* DESCRIPTION: Stop debugger
*
******************************************************************************/
void acpi_terminate_debugger(void)
{
/* Terminate the AML Debugger */
acpi_gbl_db_terminate_loop = TRUE;
if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
/* Wait the AML Debugger threads */
while (!acpi_gbl_db_threads_terminated) {
acpi_os_sleep(100);
}
acpi_os_terminate_debugger();
}
if (acpi_gbl_db_buffer) {
acpi_os_free(acpi_gbl_db_buffer);
acpi_gbl_db_buffer = NULL;
}
/* Ensure that debug output is now disabled */
acpi_gbl_db_output_flags = ACPI_DB_DISABLE_OUTPUT;
}
ACPI_EXPORT_SYMBOL(acpi_terminate_debugger)
/*******************************************************************************
*
* FUNCTION: acpi_set_debugger_thread_id
*
* PARAMETERS: thread_id - Debugger thread ID
*
* RETURN: None
*
* DESCRIPTION: Set debugger thread ID
*
******************************************************************************/
void acpi_set_debugger_thread_id(acpi_thread_id thread_id)
{
acpi_gbl_db_thread_id = thread_id;
}
ACPI_EXPORT_SYMBOL(acpi_set_debugger_thread_id)