lineage_kernel_xcoverpro/arch/arm/mach-mmp/pxa910.c

194 lines
4.8 KiB
C
Executable File

/*
* linux/arch/arm/mach-mmp/pxa910.c
*
* Code specific to PXA910
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk/mmp.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/mmp.h>
#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include "addr-map.h"
#include "regs-apbc.h"
#include "cputype.h"
#include "irqs.h"
#include "mfp.h"
#include "devices.h"
#include "pm-pxa910.h"
#include "pxa910.h"
#include "common.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
{
MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
MFP_ADDR_X(GPIO100, GPIO109, 0x238),
MFP_ADDR(GPIO123, 0xcc),
MFP_ADDR(GPIO124, 0xd0),
MFP_ADDR(DF_IO0, 0x40),
MFP_ADDR(DF_IO1, 0x3c),
MFP_ADDR(DF_IO2, 0x38),
MFP_ADDR(DF_IO3, 0x34),
MFP_ADDR(DF_IO4, 0x30),
MFP_ADDR(DF_IO5, 0x2c),
MFP_ADDR(DF_IO6, 0x28),
MFP_ADDR(DF_IO7, 0x24),
MFP_ADDR(DF_IO8, 0x20),
MFP_ADDR(DF_IO9, 0x1c),
MFP_ADDR(DF_IO10, 0x18),
MFP_ADDR(DF_IO11, 0x14),
MFP_ADDR(DF_IO12, 0x10),
MFP_ADDR(DF_IO13, 0xc),
MFP_ADDR(DF_IO14, 0x8),
MFP_ADDR(DF_IO15, 0x4),
MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
MFP_ADDR(SM_nCS0, 0x4c),
MFP_ADDR(SM_nCS1, 0x50),
MFP_ADDR(DF_WEn, 0x54),
MFP_ADDR(DF_REn, 0x58),
MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
MFP_ADDR(DF_ALE_SM_WEn, 0x60),
MFP_ADDR(SM_SCLK, 0x64),
MFP_ADDR(DF_RDY0, 0x68),
MFP_ADDR(SM_BE0, 0x6c),
MFP_ADDR(SM_BE1, 0x70),
MFP_ADDR(SM_ADV, 0x74),
MFP_ADDR(DF_RDY1, 0x78),
MFP_ADDR(SM_ADVMUX, 0x7c),
MFP_ADDR(SM_RDY, 0x80),
MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
MFP_ADDR_END,
};
void __init pxa910_init_irq(void)
{
icu_init_irq();
#ifdef CONFIG_PM
icu_irq_chip.irq_set_wake = pxa910_set_wake;
#endif
}
static int __init pxa910_init(void)
{
if (cpu_is_pxa910()) {
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa910_mfp_addr_map);
pxa910_clk_init(APB_PHYS_BASE + 0x50000,
AXI_PHYS_BASE + 0x82800,
APB_PHYS_BASE + 0x15000,
APB_PHYS_BASE + 0x3b000);
}
return 0;
}
postcore_initcall(pxa910_init);
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
#define APBC_TIMERS APBC_REG(0x34)
void __init pxa910_timer_init(void)
{
/* reset and configure */
__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
timer_init(IRQ_PXA910_AP1_TIMER1);
}
/* on-chip devices */
/* NOTE: there are totally 3 UARTs on PXA910:
*
* UART1 - Slow UART (can be used both by AP and CP)
* UART2/3 - Fast UART
*
* To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
* they are re-ordered as:
*
* pxa910_device_uart1 - UART2 as FFUART
* pxa910_device_uart2 - UART3 as BTUART
*
* UART1 is not used by AP for the moment.
*/
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
struct resource pxa910_resource_gpio[] = {
{
.start = 0xd4019000,
.end = 0xd4019fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PXA910_AP_GPIO,
.end = IRQ_PXA910_AP_GPIO,
.name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa910_device_gpio = {
.name = "mmp-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa910_resource_gpio),
.resource = pxa910_resource_gpio,
};
static struct resource pxa910_resource_rtc[] = {
{
.start = 0xd4010000,
.end = 0xd401003f,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PXA910_RTC_INT,
.end = IRQ_PXA910_RTC_INT,
.name = "rtc 1Hz",
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_PXA910_RTC_ALARM,
.end = IRQ_PXA910_RTC_ALARM,
.name = "rtc alarm",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa910_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(pxa910_resource_rtc),
.resource = pxa910_resource_rtc,
};