38 lines
970 B
Plaintext
Executable File
38 lines
970 B
Plaintext
Executable File
Sitronix ST7789V RGB panel with SPI control bus
|
|
|
|
Required properties:
|
|
- compatible: "sitronix,st7789v"
|
|
- reg: Chip select of the panel on the SPI bus
|
|
- reset-gpios: a GPIO phandle for the reset pin
|
|
- power-supply: phandle of the regulator that provides the supply voltage
|
|
|
|
Optional properties:
|
|
- backlight: phandle to the backlight used
|
|
|
|
The generic bindings for the SPI slaves documented in [1] also applies
|
|
|
|
The device node can contain one 'port' child node with one child
|
|
'endpoint' node, according to the bindings defined in [2]. This
|
|
node should describe panel's video bus.
|
|
|
|
[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
[2]: Documentation/devicetree/bindings/graph.txt
|
|
|
|
Example:
|
|
|
|
panel@0 {
|
|
compatible = "sitronix,st7789v";
|
|
reg = <0>;
|
|
reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
|
|
backlight = <&pwm_bl>;
|
|
spi-max-frequency = <100000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
|
|
port {
|
|
panel_input: endpoint {
|
|
remote-endpoint = <&tcon0_out_panel>;
|
|
};
|
|
};
|
|
};
|