37 lines
1.1 KiB
Plaintext
Executable File
37 lines
1.1 KiB
Plaintext
Executable File
Sharp 15" LQ150X1LG11 XGA TFT LCD panel
|
|
|
|
Required properties:
|
|
- compatible: should be "sharp,lq150x1lg11"
|
|
- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
|
|
|
|
Optional properties:
|
|
- backlight: phandle of the backlight device
|
|
- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
|
|
- sellvds-gpios: a single GPIO for the SELLVDS pin.
|
|
|
|
If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
|
|
pins are assumed to be handled appropriately by the hardware.
|
|
|
|
Example:
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 100000>; /* VBR */
|
|
|
|
brightness-levels = <0 20 40 60 80 100>;
|
|
default-brightness-level = <2>;
|
|
|
|
power-supply = <&vdd_12v_reg>; /* VDD */
|
|
enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */
|
|
};
|
|
|
|
panel {
|
|
compatible = "sharp,lq150x1lg11";
|
|
|
|
power-supply = <&vcc_3v3_reg>; /* VCC */
|
|
|
|
backlight = <&backlight>;
|
|
rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
|
|
sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
|
|
};
|