lineage_kernel_xcoverpro/drivers/video/backlight/ili9320.c

304 lines
6.6 KiB
C
Executable File

/* drivers/video/backlight/ili9320.c
*
* ILI9320 LCD controller driver core.
*
* Copyright 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/lcd.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <video/ili9320.h>
#include "ili9320.h"
static inline int ili9320_write_spi(struct ili9320 *ili,
unsigned int reg,
unsigned int value)
{
struct ili9320_spi *spi = &ili->access.spi;
unsigned char *addr = spi->buffer_addr;
unsigned char *data = spi->buffer_data;
/* spi message consits of:
* first byte: ID and operation
*/
addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE;
addr[1] = reg >> 8;
addr[2] = reg;
/* second message is the data to transfer */
data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE;
data[1] = value >> 8;
data[2] = value;
return spi_sync(spi->dev, &spi->message);
}
int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value)
{
dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value);
return ili->write(ili, reg, value);
}
EXPORT_SYMBOL_GPL(ili9320_write);
int ili9320_write_regs(struct ili9320 *ili,
const struct ili9320_reg *values,
int nr_values)
{
int index;
int ret;
for (index = 0; index < nr_values; index++, values++) {
ret = ili9320_write(ili, values->address, values->value);
if (ret != 0)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(ili9320_write_regs);
static void ili9320_reset(struct ili9320 *lcd)
{
struct ili9320_platdata *cfg = lcd->platdata;
cfg->reset(1);
mdelay(50);
cfg->reset(0);
mdelay(50);
cfg->reset(1);
mdelay(100);
}
static inline int ili9320_init_chip(struct ili9320 *lcd)
{
int ret;
ili9320_reset(lcd);
ret = lcd->client->init(lcd, lcd->platdata);
if (ret != 0) {
dev_err(lcd->dev, "failed to initialise display\n");
return ret;
}
lcd->initialised = 1;
return 0;
}
static inline int ili9320_power_on(struct ili9320 *lcd)
{
if (!lcd->initialised)
ili9320_init_chip(lcd);
lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
return 0;
}
static inline int ili9320_power_off(struct ili9320 *lcd)
{
lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
return 0;
}
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
static int ili9320_power(struct ili9320 *lcd, int power)
{
int ret = 0;
dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power);
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
ret = ili9320_power_on(lcd);
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
ret = ili9320_power_off(lcd);
if (ret == 0)
lcd->power = power;
else
dev_warn(lcd->dev, "failed to set power mode %d\n", power);
return ret;
}
static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd)
{
return lcd_get_data(lcd);
}
static int ili9320_set_power(struct lcd_device *ld, int power)
{
struct ili9320 *lcd = to_our_lcd(ld);
return ili9320_power(lcd, power);
}
static int ili9320_get_power(struct lcd_device *ld)
{
struct ili9320 *lcd = to_our_lcd(ld);
return lcd->power;
}
static struct lcd_ops ili9320_ops = {
.get_power = ili9320_get_power,
.set_power = ili9320_set_power,
};
static void ili9320_setup_spi(struct ili9320 *ili,
struct spi_device *dev)
{
struct ili9320_spi *spi = &ili->access.spi;
ili->write = ili9320_write_spi;
spi->dev = dev;
/* fill the two messages we are going to use to send the data
* with, the first the address followed by the data. The datasheet
* says they should be done as two distinct cycles of the SPI CS line.
*/
spi->xfer[0].tx_buf = spi->buffer_addr;
spi->xfer[1].tx_buf = spi->buffer_data;
spi->xfer[0].len = 3;
spi->xfer[1].len = 3;
spi->xfer[0].bits_per_word = 8;
spi->xfer[1].bits_per_word = 8;
spi->xfer[0].cs_change = 1;
spi_message_init(&spi->message);
spi_message_add_tail(&spi->xfer[0], &spi->message);
spi_message_add_tail(&spi->xfer[1], &spi->message);
}
int ili9320_probe_spi(struct spi_device *spi,
struct ili9320_client *client)
{
struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev);
struct device *dev = &spi->dev;
struct ili9320 *ili;
struct lcd_device *lcd;
int ret = 0;
/* verify we where given some information */
if (cfg == NULL) {
dev_err(dev, "no platform data supplied\n");
return -EINVAL;
}
if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) {
dev_err(dev, "invalid platform data supplied\n");
return -EINVAL;
}
/* allocate and initialse our state */
ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL);
if (ili == NULL)
return -ENOMEM;
ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
ili->dev = dev;
ili->client = client;
ili->power = FB_BLANK_POWERDOWN;
ili->platdata = cfg;
spi_set_drvdata(spi, ili);
ili9320_setup_spi(ili, spi);
lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili,
&ili9320_ops);
if (IS_ERR(lcd)) {
dev_err(dev, "failed to register lcd device\n");
return PTR_ERR(lcd);
}
ili->lcd = lcd;
dev_info(dev, "initialising %s\n", client->name);
ret = ili9320_power(ili, FB_BLANK_UNBLANK);
if (ret != 0) {
dev_err(dev, "failed to set lcd power state\n");
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(ili9320_probe_spi);
int ili9320_remove(struct ili9320 *ili)
{
ili9320_power(ili, FB_BLANK_POWERDOWN);
return 0;
}
EXPORT_SYMBOL_GPL(ili9320_remove);
#ifdef CONFIG_PM_SLEEP
int ili9320_suspend(struct ili9320 *lcd)
{
int ret;
ret = ili9320_power(lcd, FB_BLANK_POWERDOWN);
if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
ili9320_write(lcd, ILI9320_POWER1, lcd->power1 |
ILI9320_POWER1_SLP |
ILI9320_POWER1_DSTB);
lcd->initialised = 0;
}
return ret;
}
EXPORT_SYMBOL_GPL(ili9320_suspend);
int ili9320_resume(struct ili9320 *lcd)
{
dev_info(lcd->dev, "resuming from power state %d\n", lcd->power);
if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP)
ili9320_write(lcd, ILI9320_POWER1, 0x00);
return ili9320_power(lcd, FB_BLANK_UNBLANK);
}
EXPORT_SYMBOL_GPL(ili9320_resume);
#endif
/* Power down all displays on reboot, poweroff or halt */
void ili9320_shutdown(struct ili9320 *lcd)
{
ili9320_power(lcd, FB_BLANK_POWERDOWN);
}
EXPORT_SYMBOL_GPL(ili9320_shutdown);
MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("ILI9320 LCD Driver");
MODULE_LICENSE("GPL v2");