lineage_kernel_xcoverpro/drivers/nfc/p61.c

1060 lines
26 KiB
C
Executable File

/*
* Copyright (C) 2012-2014 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/miscdevice.h>
#include <linux/spinlock.h>
#include <linux/spi/spi.h>
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/regulator/consumer.h>
#include <linux/ioctl.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spidev.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>
#include <linux/wakelock.h>
#include "p61.h"
#include "pn547.h"
#ifdef CONFIG_ESE_SECURE
#include "../misc/tzdev/include/tzdev/tee_client_api.h"
#endif
extern long pn547_dev_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
#define P61_SPI_CLOCK 7000000L
/* size of maximum read/write buffer supported by driver */
#define MAX_BUFFER_SIZE 258U
/* Different driver debug lever */
enum P61_DEBUG_LEVEL {
P61_DEBUG_OFF,
P61_FULL_DEBUG
};
/* Variable to store current debug level request by ioctl */
static unsigned char debug_level = P61_FULL_DEBUG;
static unsigned char pwr_req_on;
#define P61_DBG_MSG(msg...) {\
switch (debug_level) {\
case P61_DEBUG_OFF:\
break;\
case P61_FULL_DEBUG:\
pr_info("[NXP-P61] " msg);\
break;\
/*fallthrough*/\
default:\
pr_err("[NXP-P61] Wrong debug level(%d)\n", debug_level);\
break;\
} \
}
#define P61_ERR_MSG(msg...) pr_err("[NXP-P61] " msg)
#define P61_INFO_MSG(msg...) pr_info("[NXP-P61] " msg)
#ifdef CONFIG_ESE_SECURE
static TEEC_UUID ese_drv_uuid = {
0x00000000, 0x0000, 0x0000, {0x00, 0x00, 0x65, 0x73, 0x65, 0x44, 0x72, 0x76}
};
enum pm_mode {
PM_SUSPEND,
PM_RESUME,
SECURE_CHECK,
};
enum secure_state {
NOT_CHECKED,
ESE_SECURED,
ESE_NOT_SECURED,
};
#endif
/* Device specific macro and structure */
struct p61_device {
wait_queue_head_t read_wq; /* wait queue for read interrupt */
struct mutex read_mutex; /* read mutex */
struct mutex write_mutex; /* write mutex */
struct spi_device *spi; /* spi device structure */
struct miscdevice miscdev; /* char device as misc driver */
unsigned int rst_gpio; /* SW Reset gpio */
unsigned int irq_gpio; /* P61 will interrupt DH for any ntf */
bool irq_enabled; /* flag to indicate irq is used */
unsigned char enable_poll_mode; /* enable the poll mode */
spinlock_t irq_enabled_lock; /*spin lock for read irq */
bool tz_mode;
spinlock_t ese_spi_lock;
bool isGpio_cfgDone;
struct wake_lock ese_lock;
bool device_opened;
struct pinctrl *pinctrl;
struct pinctrl_state *ese_on_pin;
struct pinctrl_state *ese_off_pin;
#ifdef CONFIG_ESE_SECURE
struct clk *ese_spi_pclk;
struct clk *ese_spi_sclk;
int ese_secure_check;
#endif
const char *ap_vendor;
unsigned char *buf;
};
static struct p61_device *p61_dev;
/* T==1 protocol specific global data */
const unsigned char SOF = 0xA5u;
#ifdef CONFIG_ESE_SECURE
/**
* p61_spi_clk_max_rate: finds the nearest lower rate for a clk
* @clk the clock for which to find nearest lower rate
* @rate clock frequency in Hz
* @return nearest lower rate or negative error value
*
* Public clock API extends clk_round_rate which is a ceiling function. This
* function is a floor function implemented as a binary search using the
* ceiling function.
*/
static long p61_spi_clk_max_rate(struct clk *clk, unsigned long rate)
{
long lowest_available, nearest_low, step_size, cur;
long step_direction = -1;
long guess = rate;
int max_steps = 10;
cur = clk_round_rate(clk, rate);
if (cur == rate)
return rate;
/* if we got here then: cur > rate */
lowest_available = clk_round_rate(clk, 0);
if (lowest_available > rate)
return -EINVAL;
step_size = (rate - lowest_available) >> 1;
nearest_low = lowest_available;
while (max_steps-- && step_size) {
guess += step_size * step_direction;
cur = clk_round_rate(clk, guess);
if ((cur < rate) && (cur > nearest_low))
nearest_low = cur;
/*
* if we stepped too far, then start stepping in the other
* direction with half the step size
*/
if (((cur > rate) && (step_direction > 0))
|| ((cur < rate) && (step_direction < 0))) {
step_direction = -step_direction;
step_size >>= 1;
}
}
return nearest_low;
}
static void p61_spi_clock_set(struct p61_device *p61_dev, unsigned long speed)
{
long rate;
if (!strcmp(p61_dev->ap_vendor, "qualcomm")) {
/* finds the nearest lower rate for a clk */
rate = p61_spi_clk_max_rate(p61_dev->ese_spi_sclk, speed);
if (rate < 0) {
pr_err("%s: no match found for requested clock: %lu\n",
__func__, speed);
return;
}
speed = rate;
/*pr_info("%s speed:%lu\n", __func__, speed);*/
} else if (!strcmp(p61_dev->ap_vendor, "slsi")) {
/* There is half-multiplier */
speed = speed * 4;
}
clk_set_rate(p61_dev->ese_spi_sclk, speed);
}
static int p61_clk_control(struct p61_device *p61_dev, bool onoff)
{
static bool old_value;
if (old_value == onoff) {
pr_info("%s: ALREADY %s\n", __func__,
onoff ? "enabled" : "disabled");
return 0;
}
if (onoff == true) {
/* For slsi AP, clk enable should be run before clk set */
clk_prepare_enable(p61_dev->ese_spi_pclk);
clk_prepare_enable(p61_dev->ese_spi_sclk);
p61_spi_clock_set(p61_dev, P61_SPI_CLOCK);
usleep_range(5000, 5100);
P61_INFO_MSG("%s: clock: %lu(%lu)\n", __func__, P61_SPI_CLOCK,
clk_get_rate(p61_dev->ese_spi_sclk));
} else {
clk_disable_unprepare(p61_dev->ese_spi_pclk);
clk_disable_unprepare(p61_dev->ese_spi_sclk);
}
old_value = onoff;
pr_info("%s: clock %s\n", __func__, onoff ? "enabled" : "disabled");
return 0;
}
static int p61_clk_setup(struct device *dev, struct p61_device *p61_dev)
{
p61_dev->ese_spi_pclk = clk_get(dev, "pclk");
if (IS_ERR(p61_dev->ese_spi_pclk)) {
pr_err("%s: Can't get %s\n", __func__, "pclk");
p61_dev->ese_spi_pclk = NULL;
goto err_pclk_get;
}
p61_dev->ese_spi_sclk = clk_get(dev, "sclk");
if (IS_ERR(p61_dev->ese_spi_sclk)) {
pr_err("%s: Can't get %s\n", __func__, "sclk");
p61_dev->ese_spi_sclk = NULL;
goto err_sclk_get;
}
return 0;
err_sclk_get:
clk_put(p61_dev->ese_spi_pclk);
err_pclk_get:
return -EPERM;
}
static uint32_t tz_tee_ese_drv(enum pm_mode mode)
{
TEEC_Context context;
TEEC_Session session;
TEEC_Result result;
uint32_t returnOrigin = TEEC_NONE;
result = TEEC_InitializeContext(NULL, &context);
if (result != TEEC_SUCCESS)
goto out;
result = TEEC_OpenSession(&context, &session, &ese_drv_uuid, TEEC_LOGIN_PUBLIC,
NULL, NULL, &returnOrigin);
if (result != TEEC_SUCCESS)
goto finalize_context;
/* test with valid cmd id, expected result : TEEC_SUCCESS */
result = TEEC_InvokeCommand(&session, mode, NULL, &returnOrigin);
if (result != TEEC_SUCCESS) {
P61_ERR_MSG("%s with cmd %d : FAIL\n", __func__, mode);
goto close_session;
}
P61_ERR_MSG("eSE tz_tee_dev return origin %d\n", returnOrigin);
close_session:
TEEC_CloseSession(&session);
finalize_context:
TEEC_FinalizeContext(&context);
out:
P61_INFO_MSG("tz_tee_ese_drv, cmd %d result=%#x origin=%#x\n", mode , result, returnOrigin);
return result;
}
extern int tz_tee_ese_secure_check(void);
int tz_tee_ese_secure_check(void)
{
return tz_tee_ese_drv(SECURE_CHECK);
}
#endif
int ese_spi_pinctrl(int enable)
{
int ret = 0;
pr_info("[p61] %s (%d)\n", __func__, enable);
switch (enable) {
case 0:
#ifdef CONFIG_ESE_SECURE
p61_clk_control(p61_dev, false);
tz_tee_ese_drv(PM_SUSPEND);
#else
if (p61_dev->ese_off_pin) {
if (pinctrl_select_state(p61_dev->pinctrl, p61_dev->ese_off_pin))
P61_INFO_MSG("ese off pinctrl set error\n");
else
P61_INFO_MSG("ese off pinctrl set\n");
}
#endif
break;
case 1:
#ifdef CONFIG_ESE_SECURE
p61_clk_control(p61_dev, true);
tz_tee_ese_drv(PM_RESUME);
#else
if (p61_dev->ese_on_pin) {
if (pinctrl_select_state(p61_dev->pinctrl, p61_dev->ese_on_pin))
P61_INFO_MSG("ese on pinctrl set error\n");
else
P61_INFO_MSG("ese on pinctrl set\n");
}
#endif
break;
default:
pr_err("%s no matching!\n", __func__);
ret = -EINVAL;
}
return ret;
}
EXPORT_SYMBOL_GPL(ese_spi_pinctrl);
static int p61_xfer(struct p61_device *p61_dev,
struct p61_ioctl_transfer *tr)
{
int status = 0;
struct spi_message m;
struct spi_transfer t;
/*For SDM845 & linux4.9: need to change spi buffer
* from stack to dynamic memory
*/
if (p61_dev == NULL || tr == NULL)
return -EFAULT;
if (tr->len > DEFAULT_BUFFER_SIZE || !tr->len)
return -EMSGSIZE;
spi_message_init(&m);
memset(&t, 0, sizeof(t));
memset(p61_dev->buf, 0, tr->len); /*memset 0 for read */
if (tr->tx_buffer != NULL) { /*write */
pr_info("%s...write\n", __func__);
if (copy_from_user(p61_dev->buf, tr->tx_buffer, tr->len) != 0)
return -EFAULT;
}
t.rx_buf = p61_dev->buf;
t.tx_buf = p61_dev->buf;
t.len = tr->len;
spi_message_add_tail(&t, &m);
status = spi_sync(p61_dev->spi, &m);
if (status == 0) {
if (tr->rx_buffer != NULL) { /*read */
unsigned long missing = 0;
pr_info("%s...read\n", __func__);
missing = copy_to_user(tr->rx_buffer, p61_dev->buf, tr->len);
if (missing != 0)
tr->len = tr->len - (unsigned int)missing;
}
}
pr_info("%s p61_xfer,length=%d\n", __func__, tr->len);
return status;
} /* vfsspi_xfer */
static int p61_rw_spi_message(struct p61_device *p61_dev,
unsigned long arg)
{
struct p61_ioctl_transfer *dup = NULL;
int err = 0;
dup = kmalloc(sizeof(struct p61_ioctl_transfer), GFP_KERNEL);
if (dup == NULL)
return -ENOMEM;
if (copy_from_user(dup, (void *)arg,
sizeof(struct p61_ioctl_transfer)) != 0) {
kfree(dup);
return -EFAULT;
}
err = p61_xfer(p61_dev, dup);
if (err != 0) {
kfree(dup);
pr_err("%s p61_xfer failed!\n", __func__);
return err;
}
if (copy_to_user((void *)arg, dup,
sizeof(struct p61_ioctl_transfer)) != 0) {
kfree(dup);
return -EFAULT;
}
kfree(dup);
return 0;
}
/**
* \ingroup spi_driver
* \brief Called from SPI LibEse to initilaize the P61 device
*
* \param[in] struct inode *
* \param[in] struct file *
*
* \retval 0 if ok.
*/
static int p61_dev_open(struct inode *inode, struct file *filp)
{
struct p61_device *p61_dev = container_of(filp->private_data,
struct p61_device, miscdev);
struct spi_device *spidev = NULL;
spidev = spi_dev_get(p61_dev->spi);
filp->private_data = p61_dev;
if (p61_dev->device_opened) {
pr_err("%s: already opened!\n", __func__);
return -EBUSY;
}
#ifdef CONFIG_ESE_SECURE
if (p61_dev->ese_secure_check == NOT_CHECKED) {
int ret = 0;
ret = tz_tee_ese_secure_check();
if (ret) {
p61_dev->ese_secure_check = ESE_NOT_SECURED;
P61_ERR_MSG("eSE spi is not Secured\n");
return -EBUSY;
}
p61_dev->ese_secure_check = ESE_SECURED;
} else if (p61_dev->ese_secure_check == ESE_NOT_SECURED) {
P61_ERR_MSG("eSE spi is not Secured\n");
return -EBUSY;
}
#endif
pr_info("[ESE]:%s Major No: %d, Minor No: %d\n", __func__,
imajor(inode), iminor(inode));
if (!wake_lock_active(&p61_dev->ese_lock)) {
pr_info("%s: [NFC-ESE] wake lock.\n", __func__);
wake_lock(&p61_dev->ese_lock);
}
p61_dev->device_opened = true;
return 0;
}
/**
* \ingroup spi_driver
* \brief To configure the P61_SET_PWR/P61_SET_DBG/P61_SET_POLL
* \n P61_SET_PWR - hard reset (arg=2), soft reset (arg=1)
* \n P61_SET_DBG - Enable/Disable (based on arg value) the driver logs
* \n P61_SET_POLL - Configure the driver in poll (arg = 1),
* interrupt (arg = 0) based read operation
* \param[in] struct file *
* \param[in] unsigned int
* \param[in] unsigned long
*
* \retval 0 if ok.
*
*/
static long p61_dev_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
int ret = 0;
struct p61_device *p61_dev = NULL;
if (_IOC_TYPE(cmd) != P61_MAGIC) {
pr_err("%s invalid magic. cmd=0x%X Received=0x%X Expected=0x%X\n",
__func__, cmd, _IOC_TYPE(cmd), P61_MAGIC);
return -ENOTTY;
}
pr_debug("%s entered %x\n", __func__, cmd);
p61_dev = filp->private_data;
switch (cmd) {
case P61_SET_PWR:
if (arg == 2)
pr_info("%s P61_SET_PWR. No Action.\n", __func__);
break;
case P61_SET_DBG:
debug_level = (unsigned char)arg;
P61_DBG_MSG(KERN_INFO"[NXP-P61] - Debug level %d",
debug_level);
break;
case P61_SET_POLL:
p61_dev->enable_poll_mode = (unsigned char)arg;
if (p61_dev->enable_poll_mode == 0) {
P61_DBG_MSG(KERN_INFO"[NXP-P61] - IRQ Mode is set\n");
} else {
P61_DBG_MSG(KERN_INFO"[NXP-P61] - Poll Mode is set\n");
p61_dev->enable_poll_mode = 1;
}
break;
#if !defined(CONFIG_NFC_FEATURE_SN100U)
case P61_SET_SPI_CONFIG:
pr_info("%s P61_SET_SPI_CONFIG. No Action.\n", __func__);
break;
case P61_ENABLE_SPI_CLK:
pr_info("%s P61_ENABLE_SPI_CLK. No Action.\n", __func__);
break;
case P61_DISABLE_SPI_CLK:
pr_info("%s P61_DISABLE_SPI_CLK. No Action.\n", __func__);
break;
#endif
case P61_RW_SPI_DATA:
#ifdef CONFIG_ESE_SECURE
break;
#endif
ret = p61_rw_spi_message(p61_dev, arg);
break;
case P61_SET_SPM_PWR:
pr_info("%s P61_SET_SPM_PWR: enter\n", __func__);
ret = pn547_dev_ioctl(filp, P61_SET_SPI_PWR, arg);
if (arg == 0 || arg == 1 || arg == 3)
pwr_req_on = arg;
pr_info("%s P61_SET_SPM_PWR: exit\n", __func__);
break;
case P61_GET_SPM_STATUS:
pr_info("%s P61_GET_SPM_STATUS: enter\n", __func__);
ret = pn547_dev_ioctl(filp, P61_GET_PWR_STATUS, arg);
pr_info("%s P61_GET_SPM_STATUS: exit\n", __func__);
break;
case P61_GET_ESE_ACCESS:
/*P61_DBG_MSG(KERN_ALERT " P61_GET_ESE_ACCESS: enter");*/
ret = pn547_dev_ioctl(filp, P547_GET_ESE_ACCESS, arg);
pr_info("%s P61_GET_ESE_ACCESS ret: %d exit\n", __func__, ret);
break;
case P61_SET_DWNLD_STATUS:
P61_DBG_MSG(KERN_ALERT " P61_SET_DWNLD_STATUS: enter\n");
ret = pn547_dev_ioctl(filp, PN547_SET_DWNLD_STATUS, arg);
pr_info("%s P61_SET_DWNLD_STATUS: =%lu exit\n", __func__, arg);
break;
default:
pr_info("%s no matching ioctl!\n", __func__);
ret = -EINVAL;
}
return ret;
}
/*
* Called when a process closes the device file.
*/
static int p61_dev_release(struct inode *inode, struct file *file)
{
struct p61_device *p61_dev = file->private_data;
pr_info("[ESE]: %s\n", __func__);
if (wake_lock_active(&p61_dev->ese_lock)) {
pr_info("%s: [NFC-ESE] wake unlock.\n", __func__);
wake_unlock(&p61_dev->ese_lock);
}
if (pwr_req_on && (pwr_req_on != 5)) {
pr_info("%s: [NFC-ESE] release spi session.\n", __func__);
pwr_req_on = 0;
pn547_dev_ioctl(file, P61_SET_SPI_PWR, 0);
pn547_dev_ioctl(file, P61_SET_SPI_PWR, 5);
}
p61_dev->device_opened = false;
return 0;
}
/**
* \ingroup spi_driver
* \brief Write data to P61 on SPI
*
* \param[in] struct file *
* \param[in] const char *
* \param[in] size_t
* \param[in] loff_t *
*
* \retval data size
*
*/
static ssize_t p61_dev_write(struct file *filp, const char *buf, size_t count,
loff_t *offset)
{
int ret = -1;
struct p61_device *p61_dev;
P61_DBG_MSG("p61_dev_write -Enter count %zu\n", count);
#ifdef CONFIG_ESE_SECURE
return 0;
#endif
p61_dev = filp->private_data;
mutex_lock(&p61_dev->write_mutex);
if (count > MAX_BUFFER_SIZE)
count = MAX_BUFFER_SIZE;
memset(p61_dev->buf, 0, count);
if (copy_from_user(p61_dev->buf, &buf[0], count)) {
P61_ERR_MSG("%s : failed to copy from user space\n", __func__);
mutex_unlock(&p61_dev->write_mutex);
return -EFAULT;
}
/* Write data */
ret = spi_write(p61_dev->spi, p61_dev->buf, count);
if (ret < 0)
ret = -EIO;
else
ret = count;
mutex_unlock(&p61_dev->write_mutex);
pr_info("%s -count %zu %d- Exit\n", __func__, count, ret);
return ret;
}
/**
* \ingroup spi_driver
* \brief Used to read data from P61 in Poll/interrupt mode configured using
* ioctl call
*
* \param[in] struct file *
* \param[in] char *
* \param[in] size_t
* \param[in] loff_t *
*
* \retval read size
*
*/
/* for p61 only */
static ssize_t p61_dev_read(struct file *filp, char *buf, size_t count,
loff_t *offset)
{
int ret = -EIO;
struct p61_device *p61_dev = filp->private_data;
unsigned char sof = 0x00;
int total_count = 0;
//unsigned char rx_buffer[MAX_BUFFER_SIZE];
P61_DBG_MSG("p61_dev_read count %zu - Enter\n", count);
#ifdef CONFIG_ESE_SECURE
return 0;
#endif
if (count < 1) {
P61_ERR_MSG("Invalid length (min : 258) [%zu]\n", count);
return -EINVAL;
}
mutex_lock(&p61_dev->read_mutex);
if (count > MAX_BUFFER_SIZE)
count = MAX_BUFFER_SIZE;
//memset(&rx_buffer[0], 0x00, sizeof(rx_buffer));
memset(p61_dev->buf, 0x00, MAX_BUFFER_SIZE);
P61_DBG_MSG(" %s Poll Mode Enabled\n", __func__);
do {
sof = 0x00;
ret = spi_read(p61_dev->spi, (void *)&sof, 1);
if (ret < 0) {
P61_ERR_MSG("spi_read failed [SOF]\n");
goto fail;
}
//P61_DBG_MSG(KERN_INFO"SPI_READ returned 0x%x\n", sof);
/* if SOF not received, give some time to P61 */
/* RC put the conditional delay only if SOF not received */
if (sof != SOF)
usleep_range(5000, 5100);
} while (sof != SOF);
P61_DBG_MSG("SPI_READ returned 0x%x...\n", sof);
total_count = 1;
//rx_buffer[0] = sof;
*p61_dev->buf = sof;
/* Read the HEADR of Two bytes*/
ret = spi_read(p61_dev->spi, p61_dev->buf + 1, 2);
if (ret < 0) {
P61_ERR_MSG("spi_read fails after [PCB]\n");
ret = -EIO;
goto fail;
}
total_count += 2;
/* Get the data length */
//count = rx_buffer[2];
count = *(p61_dev->buf + 2);
pr_info("Data Length = %zu", count);
/* Read the available data along with one byte LRC */
ret = spi_read(p61_dev->spi, (void *)(p61_dev->buf + 3), (count+1));
if (ret < 0) {
pr_err("%s spi_read failed\n", __func__);
ret = -EIO;
goto fail;
}
total_count = (total_count + (count+1));
P61_DBG_MSG(KERN_INFO"total_count = %d", total_count);
if (copy_to_user(buf, p61_dev->buf, total_count)) {
P61_ERR_MSG("%s : failed to copy to user space\n", __func__);
ret = -EFAULT;
goto fail;
}
ret = total_count;
P61_DBG_MSG("p61_dev_read ret %d Exit\n", ret);
mutex_unlock(&p61_dev->read_mutex);
return ret;
fail:
P61_ERR_MSG("Error p61_dev_read ret %d Exit\n", ret);
pr_info("%s - count %zu %d- Exit\n", __func__, count, ret);
mutex_unlock(&p61_dev->read_mutex);
return ret;
}
/**
* \ingroup spi_driver
* \brief Set the P61 device specific context for future use.
* \param[in] struct spi_device *
* \param[in] void *
* \retval void
*/
static inline void p61_set_data(struct spi_device *spi, void *data)
{
dev_set_drvdata(&spi->dev, data);
}
/**
* \ingroup spi_driver
* \brief Get the P61 device specific context.
* \param[in] const struct spi_device *
* \retval Device Parameters
*/
static inline void *p61_get_data(const struct spi_device *spi)
{
return dev_get_drvdata(&spi->dev);
}
static const struct file_operations p61_dev_fops = {
.owner = THIS_MODULE,
.read = p61_dev_read,
.write = p61_dev_write,
.open = p61_dev_open,
.unlocked_ioctl = p61_dev_ioctl,
.release = p61_dev_release,
};
#if 0
static ssize_t p61_test_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned char data;
int ret = 0;
//struct spi_device *spi = to_spi_device(dev);
//ret = spi_read(p61_dev->spi, (void *)&sof, 1);
pr_info("%s\n", __func__);
data = 'a';
snprintf(buf, 4, "%d\n", data);
return ret;
}
static ssize_t p61_test_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long data;
int error;
//struct spi_device *spi = to_spi_device(dev);
error = kstrtoul(buf, 10, &data);
if (error)
return error;
pr_info("%s [%lu]\n", __func__, data);
return count;
}
static DEVICE_ATTR(test, 0644, p61_test_show, p61_test_store);
#endif
static int p61_parse_dt(struct device *dev,
struct p61_device *p61_dev)
{
struct device_node *np = dev->of_node;
struct device_node *spi_device_node;
struct platform_device *spi_pdev;
if (!of_property_read_string(np, "p61-ap_vendor",
&p61_dev->ap_vendor)) {
pr_info("%s: ap_vendor - %s\n", __func__, p61_dev->ap_vendor);
}
spi_device_node = of_parse_phandle(np, "p61-spi_node", 0);
if (!IS_ERR_OR_NULL(spi_device_node)) {
spi_pdev = of_find_device_by_node(spi_device_node);
#ifndef CONFIG_ESE_SECURE
p61_dev->pinctrl = devm_pinctrl_get(&spi_pdev->dev);
if (IS_ERR(p61_dev->pinctrl))
P61_INFO_MSG("devm_pinctrl_get failed\n");
p61_dev->ese_on_pin = pinctrl_lookup_state(p61_dev->pinctrl, "ese_on");
if (IS_ERR(p61_dev->ese_on_pin)) {
P61_INFO_MSG("pinctrl_lookup_state failed-ese_on\n");
p61_dev->ese_on_pin = NULL;
}
p61_dev->ese_off_pin = pinctrl_lookup_state(p61_dev->pinctrl, "ese_off");
if (IS_ERR(p61_dev->ese_off_pin)) {
P61_INFO_MSG("pinctrl_lookup_state failed-ese_off\n");
p61_dev->ese_off_pin = NULL;
} else if (pinctrl_select_state(p61_dev->pinctrl, p61_dev->ese_off_pin))
P61_INFO_MSG("ese off pinctrl set error\n");
else
P61_INFO_MSG("ese off pinctrl set\n");
#endif
} else {
pr_info("target does not use spi pinctrl\n");
}
return 0;
}
/**
* \ingroup spi_driver
* \brief To probe for P61 SPI interface. If found initialize the SPI clock,
* bit rate & SPI mode. It will create the dev entry (P61) for user space.
*
* \param[in] struct spi_device *
*
* \retval 0 if ok.
*
*/
static int p61_probe(struct spi_device *spi)
{
int ret = -1;
struct device_node *np = spi->dev.of_node;
struct property *prop;
int ese_support = 0;
pr_info("%s: chip select(%d), bus number(%d)\n",
__func__, spi->chip_select, spi->master->bus_num);
/*separate NFC / non NFC using GPIO*/
prop = of_find_property(np, "p61-check_ese", NULL);
if (prop) {
ese_support = gpio_get_value(of_get_named_gpio(np, "p61-check_ese", 0));
if (ese_support > 0) {
P61_ERR_MSG("%s : ese support model : %d\n", __func__, ese_support);
}else{
P61_ERR_MSG("%s : ese not support model : %d\n", __func__, ese_support);
return -ENXIO;
}
}
p61_dev = kzalloc(sizeof(*p61_dev), GFP_KERNEL);
if (p61_dev == NULL) {
P61_ERR_MSG("failed to allocate memory for module data\n");
ret = -ENOMEM;
goto err_exit;
}
ret = p61_parse_dt(&spi->dev, p61_dev);
if (ret) {
pr_err("%s: Failed to parse DT\n", __func__);
goto p61_parse_dt_failed;
}
pr_info("%s: tz_mode=%d, isGpio_cfgDone:%d\n", __func__,
p61_dev->tz_mode, p61_dev->isGpio_cfgDone);
spi->bits_per_word = 8;
spi->mode = SPI_MODE_0;
spi->max_speed_hz = P61_SPI_CLOCK;
#ifndef CONFIG_ESE_SECURE
ret = spi_setup(spi);
if (ret < 0) {
P61_ERR_MSG("failed to do spi_setup()\n");
goto p61_spi_setup_failed;
}
#else
p61_dev->ese_secure_check = NOT_CHECKED;
pr_info("%s: eSE Secured system\n", __func__);
ret = p61_clk_setup(&spi->dev, p61_dev);
if (ret)
pr_err("%s - Failed to do clk_setup\n", __func__);
#endif
p61_dev->spi = spi;
p61_dev->miscdev.minor = MISC_DYNAMIC_MINOR;
p61_dev->miscdev.name = "p61";
p61_dev->miscdev.fops = &p61_dev_fops;
p61_dev->miscdev.parent = &spi->dev;
dev_set_drvdata(&spi->dev, p61_dev);
/* init mutex and queues */
init_waitqueue_head(&p61_dev->read_wq);
mutex_init(&p61_dev->read_mutex);
mutex_init(&p61_dev->write_mutex);
spin_lock_init(&p61_dev->ese_spi_lock);
wake_lock_init(&p61_dev->ese_lock, WAKE_LOCK_SUSPEND, "ese_wake_lock");
p61_dev->device_opened = false;
ret = misc_register(&p61_dev->miscdev);
if (ret < 0) {
P61_ERR_MSG("misc_register failed! %d\n", ret);
goto err_exit0;
}
p61_dev->enable_poll_mode = 1; /* No USE? */
p61_dev->buf = kzalloc(sizeof(unsigned char) * MAX_BUFFER_SIZE, GFP_KERNEL);
if (p61_dev->buf == NULL) {
P61_ERR_MSG("failed to allocate for spi buffer\n");
ret = -ENOMEM;
goto err_exit0;
}
pr_info("%s: finished\n", __func__);
return ret;
err_exit0:
mutex_destroy(&p61_dev->read_mutex);
mutex_destroy(&p61_dev->write_mutex);
wake_lock_destroy(&p61_dev->ese_lock);
#ifndef CONFIG_ESE_SECURE
p61_spi_setup_failed:
#endif
p61_parse_dt_failed:
if (p61_dev != NULL)
kfree(p61_dev);
err_exit:
P61_DBG_MSG("ERROR: Exit : %s ret %d\n", __func__, ret);
return ret;
}
/**
* \ingroup spi_driver
* \brief Will get called when the device is removed to release the resources.
* \param[in] struct spi_device
* \retval 0 if ok.
*/
static int p61_remove(struct spi_device *spi)
{
struct p61_device *p61_dev = p61_get_data(spi);
P61_DBG_MSG("Entry : %s\n", __func__);
mutex_destroy(&p61_dev->read_mutex);
misc_deregister(&p61_dev->miscdev);
wake_lock_destroy(&p61_dev->ese_lock);
kfree(p61_dev->buf);
kfree(p61_dev);
P61_DBG_MSG("Exit : %s\n", __func__);
return 0;
}
static const struct of_device_id p61_match_table[] = {
{ .compatible = "p61",},
{},
};
static struct spi_driver p61_driver = {
.driver = {
.name = "p61",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
#ifdef CONFIG_OF
.of_match_table = p61_match_table,
#endif
},
.probe = p61_probe,
.remove = p61_remove,
};
/**
* \ingroup spi_driver
* \brief Module init interface
*
* \param[in] void
*
* \retval handle
*
*/
static int __init p61_dev_init(void)
{
debug_level = P61_FULL_DEBUG;
P61_DBG_MSG("Entry : %s\n", __func__);
return spi_register_driver(&p61_driver);
P61_DBG_MSG("Exit : %s\n", __func__);
}
/**
* \ingroup spi_driver
* \brief Module exit interface
*
* \param[in] void
*
* \retval void
*
*/
static void __exit p61_dev_exit(void)
{
P61_DBG_MSG("Entry : %s\n", __func__);
spi_unregister_driver(&p61_driver);
P61_DBG_MSG("Exit : %s\n", __func__);
}
module_init(p61_dev_init);
module_exit(p61_dev_exit);
MODULE_AUTHOR("BHUPENDRA PAWAR");
MODULE_DESCRIPTION("NXP P61 SPI driver");
MODULE_LICENSE("GPL");