210 lines
5.5 KiB
C
Executable File
210 lines
5.5 KiB
C
Executable File
/*
|
|
* TX4938 internal IDE driver
|
|
* Based on tx4939ide.c.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* (C) Copyright TOSHIBA CORPORATION 2005-2007
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/ide.h>
|
|
#include <asm/txx9/tx4938.h>
|
|
|
|
static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
|
|
unsigned int gbus_clock,
|
|
u8 pio)
|
|
{
|
|
struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
|
|
u64 cr = __raw_readq(&tx4938_ebuscptr->cr[ebus_ch]);
|
|
unsigned int sp = (cr >> 4) & 3;
|
|
unsigned int clock = gbus_clock / (4 - sp);
|
|
unsigned int cycle = 1000000000 / clock;
|
|
unsigned int shwt;
|
|
int wt;
|
|
|
|
/* Minimum DIOx- active time */
|
|
wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
|
|
/* IORDY setup time: 35ns */
|
|
wt = max_t(int, wt, DIV_ROUND_UP(35, cycle));
|
|
/* actual wait-cycle is max(wt & ~1, 1) */
|
|
if (wt > 2 && (wt & 1))
|
|
wt++;
|
|
wt &= ~1;
|
|
/* Address-valid to DIOR/DIOW setup */
|
|
shwt = DIV_ROUND_UP(t->setup, cycle);
|
|
|
|
/* -DIOx recovery time (SHWT * 4) and cycle time requirement */
|
|
while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle)
|
|
shwt++;
|
|
if (shwt > 7) {
|
|
pr_warning("tx4938ide: SHWT violation (%d)\n", shwt);
|
|
shwt = 7;
|
|
}
|
|
pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
|
|
ebus_ch, cycle, wt, shwt);
|
|
|
|
__raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt,
|
|
&tx4938_ebuscptr->cr[ebus_ch]);
|
|
}
|
|
|
|
static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
struct tx4938ide_platform_info *pdata = dev_get_platdata(hwif->dev);
|
|
u8 safe = drive->pio_mode - XFER_PIO_0;
|
|
ide_drive_t *pair;
|
|
|
|
pair = ide_get_pair_dev(drive);
|
|
if (pair)
|
|
safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0);
|
|
tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
|
|
}
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
|
|
/* custom iops (independent from SWAP_IO_SPACE) */
|
|
static void tx4938ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
|
|
void *buf, unsigned int len)
|
|
{
|
|
unsigned long port = drive->hwif->io_ports.data_addr;
|
|
unsigned short *ptr = buf;
|
|
unsigned int count = (len + 1) / 2;
|
|
|
|
while (count--)
|
|
*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
|
|
__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
|
|
}
|
|
|
|
static void tx4938ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
|
|
void *buf, unsigned int len)
|
|
{
|
|
unsigned long port = drive->hwif->io_ports.data_addr;
|
|
unsigned short *ptr = buf;
|
|
unsigned int count = (len + 1) / 2;
|
|
|
|
while (count--) {
|
|
__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
|
|
ptr++;
|
|
}
|
|
__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
|
|
}
|
|
|
|
static const struct ide_tp_ops tx4938ide_tp_ops = {
|
|
.exec_command = ide_exec_command,
|
|
.read_status = ide_read_status,
|
|
.read_altstatus = ide_read_altstatus,
|
|
.write_devctl = ide_write_devctl,
|
|
|
|
.dev_select = ide_dev_select,
|
|
.tf_load = ide_tf_load,
|
|
.tf_read = ide_tf_read,
|
|
|
|
.input_data = tx4938ide_input_data_swap,
|
|
.output_data = tx4938ide_output_data_swap,
|
|
};
|
|
|
|
#endif /* __BIG_ENDIAN */
|
|
|
|
static const struct ide_port_ops tx4938ide_port_ops = {
|
|
.set_pio_mode = tx4938ide_set_pio_mode,
|
|
};
|
|
|
|
static const struct ide_port_info tx4938ide_port_info __initconst = {
|
|
.port_ops = &tx4938ide_port_ops,
|
|
#ifdef __BIG_ENDIAN
|
|
.tp_ops = &tx4938ide_tp_ops,
|
|
#endif
|
|
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
|
|
.pio_mask = ATA_PIO5,
|
|
.chipset = ide_generic,
|
|
};
|
|
|
|
static int __init tx4938ide_probe(struct platform_device *pdev)
|
|
{
|
|
struct ide_hw hw, *hws[] = { &hw };
|
|
struct ide_host *host;
|
|
struct resource *res;
|
|
struct tx4938ide_platform_info *pdata = dev_get_platdata(&pdev->dev);
|
|
int irq, ret, i;
|
|
unsigned long mapbase, mapctl;
|
|
struct ide_port_info d = tx4938ide_port_info;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENODEV;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
if (!devm_request_mem_region(&pdev->dev, res->start,
|
|
resource_size(res), "tx4938ide"))
|
|
return -EBUSY;
|
|
mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
|
|
8 << pdata->ioport_shift);
|
|
mapctl = (unsigned long)devm_ioremap(&pdev->dev,
|
|
res->start + 0x10000 +
|
|
(6 << pdata->ioport_shift),
|
|
1 << pdata->ioport_shift);
|
|
if (!mapbase || !mapctl)
|
|
return -EBUSY;
|
|
|
|
memset(&hw, 0, sizeof(hw));
|
|
if (pdata->ioport_shift) {
|
|
unsigned long port = mapbase;
|
|
unsigned long ctl = mapctl;
|
|
|
|
hw.io_ports_array[0] = port;
|
|
#ifdef __BIG_ENDIAN
|
|
port++;
|
|
ctl++;
|
|
#endif
|
|
for (i = 1; i <= 7; i++)
|
|
hw.io_ports_array[i] =
|
|
port + (i << pdata->ioport_shift);
|
|
hw.io_ports.ctl_addr = ctl;
|
|
} else
|
|
ide_std_init_ports(&hw, mapbase, mapctl);
|
|
hw.irq = irq;
|
|
hw.dev = &pdev->dev;
|
|
|
|
pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n",
|
|
mapbase, mapctl, hw.irq);
|
|
if (pdata->gbus_clock)
|
|
tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
|
|
else
|
|
d.port_ops = NULL;
|
|
ret = ide_host_add(&d, hws, 1, &host);
|
|
if (!ret)
|
|
platform_set_drvdata(pdev, host);
|
|
return ret;
|
|
}
|
|
|
|
static int __exit tx4938ide_remove(struct platform_device *pdev)
|
|
{
|
|
struct ide_host *host = platform_get_drvdata(pdev);
|
|
|
|
ide_host_remove(host);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tx4938ide_driver = {
|
|
.driver = {
|
|
.name = "tx4938ide",
|
|
},
|
|
.remove = __exit_p(tx4938ide_remove),
|
|
};
|
|
|
|
module_platform_driver_probe(tx4938ide_driver, tx4938ide_probe);
|
|
|
|
MODULE_DESCRIPTION("TX4938 internal IDE driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:tx4938ide");
|