119 lines
3.7 KiB
Plaintext
Executable File
119 lines
3.7 KiB
Plaintext
Executable File
* Qualcomm Atheros ath10k wireless devices
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following:
|
|
* "qcom,ath10k"
|
|
* "qcom,ipq4019-wifi"
|
|
|
|
PCI based devices uses compatible string "qcom,ath10k" and takes calibration
|
|
data along with board specific data via "qcom,ath10k-calibration-data".
|
|
Rest of the properties are not applicable for PCI based devices.
|
|
|
|
AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
|
|
and also uses most of the properties defined in this doc (except
|
|
"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
|
|
to carry pre calibration data.
|
|
|
|
In general, entry "qcom,ath10k-pre-calibration-data" and
|
|
"qcom,ath10k-calibration-data" conflict with each other and only one
|
|
can be provided per device.
|
|
|
|
Optional properties:
|
|
- reg: Address and length of the register set for the device.
|
|
- resets: Must contain an entry for each entry in reset-names.
|
|
See ../reset/reseti.txt for details.
|
|
- reset-names: Must include the list of following reset names,
|
|
"wifi_cpu_init"
|
|
"wifi_radio_srif"
|
|
"wifi_radio_warm"
|
|
"wifi_radio_cold"
|
|
"wifi_core_warm"
|
|
"wifi_core_cold"
|
|
- clocks: List of clock specifiers, must contain an entry for each required
|
|
entry in clock-names.
|
|
- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
|
|
"wifi_wcss_rtc".
|
|
- interrupts: List of interrupt lines. Must contain an entry
|
|
for each entry in the interrupt-names property.
|
|
- interrupt-names: Must include the entries for MSI interrupt
|
|
names ("msi0" to "msi15") and legacy interrupt
|
|
name ("legacy"),
|
|
- qcom,msi_addr: MSI interrupt address.
|
|
- qcom,msi_base: Base value to add before writing MSI data into
|
|
MSI address register.
|
|
- qcom,ath10k-calibration-data : calibration data + board specific data
|
|
as an array, the length can vary between
|
|
hw versions.
|
|
- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
|
|
the length can vary between hw versions.
|
|
|
|
Example (to supply the calibration data alone):
|
|
|
|
In this example, the node is defined as child node of the PCI controller.
|
|
|
|
pci {
|
|
pcie@0 {
|
|
reg = <0 0 0 0 0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
|
|
ath10k@0,0 {
|
|
reg = <0 0 0 0 0>;
|
|
device_type = "pci";
|
|
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
|
|
};
|
|
};
|
|
};
|
|
|
|
Example (to supply ipq4019 SoC wifi block details):
|
|
|
|
wifi0: wifi@a000000 {
|
|
compatible = "qcom,ipq4019-wifi";
|
|
reg = <0xa000000 0x200000>;
|
|
resets = <&gcc WIFI0_CPU_INIT_RESET>,
|
|
<&gcc WIFI0_RADIO_SRIF_RESET>,
|
|
<&gcc WIFI0_RADIO_WARM_RESET>,
|
|
<&gcc WIFI0_RADIO_COLD_RESET>,
|
|
<&gcc WIFI0_CORE_WARM_RESET>,
|
|
<&gcc WIFI0_CORE_COLD_RESET>;
|
|
reset-names = "wifi_cpu_init",
|
|
"wifi_radio_srif",
|
|
"wifi_radio_warm",
|
|
"wifi_radio_cold",
|
|
"wifi_core_warm",
|
|
"wifi_core_cold";
|
|
clocks = <&gcc GCC_WCSS2G_CLK>,
|
|
<&gcc GCC_WCSS2G_REF_CLK>,
|
|
<&gcc GCC_WCSS2G_RTC_CLK>;
|
|
clock-names = "wifi_wcss_cmd",
|
|
"wifi_wcss_ref",
|
|
"wifi_wcss_rtc";
|
|
interrupts = <0 0x20 0x1>,
|
|
<0 0x21 0x1>,
|
|
<0 0x22 0x1>,
|
|
<0 0x23 0x1>,
|
|
<0 0x24 0x1>,
|
|
<0 0x25 0x1>,
|
|
<0 0x26 0x1>,
|
|
<0 0x27 0x1>,
|
|
<0 0x28 0x1>,
|
|
<0 0x29 0x1>,
|
|
<0 0x2a 0x1>,
|
|
<0 0x2b 0x1>,
|
|
<0 0x2c 0x1>,
|
|
<0 0x2d 0x1>,
|
|
<0 0x2e 0x1>,
|
|
<0 0x2f 0x1>,
|
|
<0 0xa8 0x0>;
|
|
interrupt-names = "msi0", "msi1", "msi2", "msi3",
|
|
"msi4", "msi5", "msi6", "msi7",
|
|
"msi8", "msi9", "msi10", "msi11",
|
|
"msi12", "msi13", "msi14", "msi15",
|
|
"legacy";
|
|
qcom,msi_addr = <0x0b006040>;
|
|
qcom,msi_base = <0x40>;
|
|
qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
|
|
};
|