64 lines
1.6 KiB
Plaintext
Executable File
64 lines
1.6 KiB
Plaintext
Executable File
SMIA/SMIA++ sensor
|
|
|
|
SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
|
|
defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
|
|
of that. These definitions are valid for both types of sensors.
|
|
|
|
More detailed documentation can be found in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt .
|
|
|
|
|
|
Mandatory properties
|
|
--------------------
|
|
|
|
- compatible: "nokia,smia"
|
|
- reg: I2C address (0x10, or an alternative address)
|
|
- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
|
|
dependent).
|
|
- clocks: External clock to the sensor
|
|
- clock-frequency: Frequency of the external clock to the sensor
|
|
- link-frequencies: List of allowed data link frequencies. An array of
|
|
64-bit elements.
|
|
|
|
|
|
Optional properties
|
|
-------------------
|
|
|
|
- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
|
|
the NVM contents will not be read.
|
|
- reset-gpios: XSHUTDOWN GPIO
|
|
|
|
|
|
Endpoint node mandatory properties
|
|
----------------------------------
|
|
|
|
- clock-lanes: <0>
|
|
- data-lanes: <1..n>
|
|
- remote-endpoint: A phandle to the bus receiver's endpoint node.
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
|
|
smiapp_1: camera@10 {
|
|
compatible = "nokia,smia";
|
|
reg = <0x10>;
|
|
reset-gpios = <&gpio3 20 0>;
|
|
vana-supply = <&vaux3>;
|
|
clocks = <&omap3_isp 0>;
|
|
clock-frequency = <9600000>;
|
|
nokia,nvm-size = <512>; /* 8 * 64 */
|
|
link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
|
|
port {
|
|
smiapp_1_1: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2>;
|
|
remote-endpoint = <&csi2a_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|