96 lines
2.1 KiB
Plaintext
Executable File
96 lines
2.1 KiB
Plaintext
Executable File
* Analog Devices ADV748X video decoder with HDMI receiver
|
|
|
|
The ADV7481 and ADV7482 are multi format video decoders with an integrated
|
|
HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
|
|
from three input sources HDMI, analog and TTL.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must contain one of the following
|
|
- "adi,adv7481" for the ADV7481
|
|
- "adi,adv7482" for the ADV7482
|
|
|
|
- reg: I2C slave address
|
|
|
|
Optional Properties:
|
|
|
|
- interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
|
|
"intrq3". All interrupts are optional. The "intrq3" interrupt
|
|
is only available on the adv7481
|
|
- interrupts: Specify the interrupt lines for the ADV748x
|
|
|
|
The device node must contain one 'port' child node per device input and output
|
|
port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
|
|
are numbered as follows.
|
|
|
|
Name Type Port
|
|
---------------------------------------
|
|
AIN0 sink 0
|
|
AIN1 sink 1
|
|
AIN2 sink 2
|
|
AIN3 sink 3
|
|
AIN4 sink 4
|
|
AIN5 sink 5
|
|
AIN6 sink 6
|
|
AIN7 sink 7
|
|
HDMI sink 8
|
|
TTL sink 9
|
|
TXA source 10
|
|
TXB source 11
|
|
|
|
The digital output port nodes must contain at least one endpoint.
|
|
|
|
Ports are optional if they are not connected to anything at the hardware level.
|
|
|
|
Example:
|
|
|
|
video-receiver@70 {
|
|
compatible = "adi,adv7482";
|
|
reg = <0x70>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
interrupt-names = "intrq1", "intrq2";
|
|
interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
|
|
<31 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
adv7482_ain7: endpoint {
|
|
remote-endpoint = <&cvbs_in>;
|
|
};
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
adv7482_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_in>;
|
|
};
|
|
};
|
|
|
|
port@10 {
|
|
reg = <10>;
|
|
|
|
adv7482_txa: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2 3 4>;
|
|
remote-endpoint = <&csi40_in>;
|
|
};
|
|
};
|
|
|
|
port@11 {
|
|
reg = <11>;
|
|
|
|
adv7482_txb: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1>;
|
|
remote-endpoint = <&csi20_in>;
|
|
};
|
|
};
|
|
};
|