256 lines
6.8 KiB
Plaintext
Executable File
256 lines
6.8 KiB
Plaintext
Executable File
ARM Broadcom STB platforms Device Tree Bindings
|
|
-----------------------------------------------
|
|
Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
|
|
SoC shall have the following DT organization:
|
|
|
|
Required root node properties:
|
|
- compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
|
|
|
|
example:
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
model = "Broadcom STB (bcm7445)";
|
|
compatible = "brcm,bcm7445", "brcm,brcmstb";
|
|
|
|
Further, syscon nodes that map platform-specific registers used for general
|
|
system control is required:
|
|
|
|
- compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
|
|
- compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
|
|
- compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
|
|
|
|
hif-cpubiuctrl node
|
|
-------------------
|
|
SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
|
|
(BIU) block which controls and interfaces the CPU complex to the different
|
|
Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
|
|
offers a feature called Write Pairing which consists in collapsing two adjacent
|
|
cache lines into a single (bursted) write transaction towards the memory
|
|
controller (MEMC) to maximize write bandwidth.
|
|
|
|
Required properties:
|
|
|
|
- compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
|
|
|
|
Optional properties:
|
|
|
|
- brcm,write-pairing:
|
|
Boolean property, which when present indicates that the chip
|
|
supports write-pairing.
|
|
|
|
example:
|
|
rdb {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0 0x00 0xf0000000 0x1000000>;
|
|
|
|
sun_top_ctrl: syscon@404000 {
|
|
compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
|
|
reg = <0x404000 0x51c>;
|
|
};
|
|
|
|
hif_cpubiuctrl: syscon@3e2400 {
|
|
compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
|
|
reg = <0x3e2400 0x5b4>;
|
|
brcm,write-pairing;
|
|
};
|
|
|
|
hif_continuation: syscon@452000 {
|
|
compatible = "brcm,bcm7445-hif-continuation", "syscon";
|
|
reg = <0x452000 0x100>;
|
|
};
|
|
};
|
|
|
|
Nodes that allow for support of SMP initialization and reboot are required:
|
|
|
|
smpboot
|
|
-------
|
|
Required properties:
|
|
|
|
- compatible
|
|
The string "brcm,brcmstb-smpboot".
|
|
|
|
- syscon-cpu
|
|
A phandle / integer array property which lets the BSP know the location
|
|
of certain CPU power-on registers.
|
|
|
|
The layout of the property is as follows:
|
|
o a phandle to the "hif_cpubiuctrl" syscon node
|
|
o offset to the base CPU power zone register
|
|
o offset to the base CPU reset register
|
|
|
|
- syscon-cont
|
|
A phandle pointing to the syscon node which describes the CPU boot
|
|
continuation registers.
|
|
o a phandle to the "hif_continuation" syscon node
|
|
|
|
example:
|
|
smpboot {
|
|
compatible = "brcm,brcmstb-smpboot";
|
|
syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
|
|
syscon-cont = <&hif_continuation>;
|
|
};
|
|
|
|
reboot
|
|
-------
|
|
Required properties
|
|
|
|
- compatible
|
|
The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
|
|
the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
|
|
chips with the old SUN_TOP_CTRL interface.
|
|
|
|
- syscon
|
|
A phandle / integer array that points to the syscon node which describes
|
|
the general system reset registers.
|
|
o a phandle to "sun_top_ctrl"
|
|
o offset to the "reset source enable" register
|
|
o offset to the "software master reset" register
|
|
|
|
example:
|
|
reboot {
|
|
compatible = "brcm,brcmstb-reboot";
|
|
syscon = <&sun_top_ctrl 0x304 0x308>;
|
|
};
|
|
|
|
|
|
|
|
Power management
|
|
----------------
|
|
|
|
For power management (particularly, S2/S3/S5 system suspend), the following SoC
|
|
components are needed:
|
|
|
|
= Always-On control block (AON CTRL)
|
|
|
|
This hardware provides control registers for the "always-on" (even in low-power
|
|
modes) hardware, such as the Power Management State Machine (PMSM).
|
|
|
|
Required properties:
|
|
- compatible : should contain "brcm,brcmstb-aon-ctrl"
|
|
- reg : the register start and length for the AON CTRL block
|
|
|
|
Example:
|
|
|
|
aon-ctrl@410000 {
|
|
compatible = "brcm,brcmstb-aon-ctrl";
|
|
reg = <0x410000 0x400>;
|
|
};
|
|
|
|
= Memory controllers
|
|
|
|
A Broadcom STB SoC typically has a number of independent memory controllers,
|
|
each of which may have several associated hardware blocks, which are versioned
|
|
independently (control registers, DDR PHYs, etc.). One might consider
|
|
describing these controllers as a parent "memory controllers" block, which
|
|
contains N sub-nodes (one for each controller in the system), each of which is
|
|
associated with a number of hardware register resources (e.g., its PHY). See
|
|
the example device tree snippet below.
|
|
|
|
== MEMC (MEMory Controller)
|
|
|
|
Represents a single memory controller instance.
|
|
|
|
Required properties:
|
|
- compatible : should contain "brcm,brcmstb-memc" and "simple-bus"
|
|
|
|
Should contain subnodes for any of the following relevant hardware resources:
|
|
|
|
== DDR PHY control
|
|
|
|
Control registers for this memory controller's DDR PHY.
|
|
|
|
Required properties:
|
|
- compatible : should contain one of these
|
|
"brcm,brcmstb-ddr-phy-v225.1"
|
|
"brcm,brcmstb-ddr-phy-v240.1"
|
|
"brcm,brcmstb-ddr-phy-v240.2"
|
|
|
|
- reg : the DDR PHY register range
|
|
|
|
== DDR SHIMPHY
|
|
|
|
Control registers for this memory controller's DDR SHIMPHY.
|
|
|
|
Required properties:
|
|
- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
|
|
- reg : the DDR SHIMPHY register range
|
|
|
|
== MEMC DDR control
|
|
|
|
Sequencer DRAM parameters and control registers. Used for Self-Refresh
|
|
Power-Down (SRPD), among other things.
|
|
|
|
Required properties:
|
|
- compatible : should contain "brcm,brcmstb-memc-ddr"
|
|
- reg : the MEMC DDR register range
|
|
|
|
Example:
|
|
|
|
memory_controllers {
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
memc@0 {
|
|
compatible = "brcm,brcmstb-memc", "simple-bus";
|
|
ranges;
|
|
|
|
ddr-phy@f1106000 {
|
|
compatible = "brcm,brcmstb-ddr-phy-v240.1";
|
|
reg = <0xf1106000 0x21c>;
|
|
};
|
|
|
|
shimphy@f1108000 {
|
|
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
|
|
reg = <0xf1108000 0xe4>;
|
|
};
|
|
|
|
memc-ddr@f1102000 {
|
|
reg = <0xf1102000 0x800>;
|
|
compatible = "brcm,brcmstb-memc-ddr";
|
|
};
|
|
};
|
|
|
|
memc@1 {
|
|
compatible = "brcm,brcmstb-memc", "simple-bus";
|
|
ranges;
|
|
|
|
ddr-phy@f1186000 {
|
|
compatible = "brcm,brcmstb-ddr-phy-v240.1";
|
|
reg = <0xf1186000 0x21c>;
|
|
};
|
|
|
|
shimphy@f1188000 {
|
|
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
|
|
reg = <0xf1188000 0xe4>;
|
|
};
|
|
|
|
memc-ddr@f1182000 {
|
|
reg = <0xf1182000 0x800>;
|
|
compatible = "brcm,brcmstb-memc-ddr";
|
|
};
|
|
};
|
|
|
|
memc@2 {
|
|
compatible = "brcm,brcmstb-memc", "simple-bus";
|
|
ranges;
|
|
|
|
ddr-phy@f1206000 {
|
|
compatible = "brcm,brcmstb-ddr-phy-v240.1";
|
|
reg = <0xf1206000 0x21c>;
|
|
};
|
|
|
|
shimphy@f1208000 {
|
|
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
|
|
reg = <0xf1208000 0xe4>;
|
|
};
|
|
|
|
memc-ddr@f1202000 {
|
|
reg = <0xf1202000 0x800>;
|
|
compatible = "brcm,brcmstb-memc-ddr";
|
|
};
|
|
};
|
|
};
|