config SCSC_WLAN
	tristate "Driver for Samsung SCSC Maxwell Wifi"
	depends on SCSC_CORE
	depends on CFG80211

if SCSC_WLAN != n
config SCSC_WLAN_KEY_MGMT_OFFLOAD
        bool "Enable roam offload for SCSC WLAN"
        default y
        ---help---
          This option enables roam offload for SCSC WLAN.

config SCSC_WLAN_HIP4_PROFILING
	bool "Enable HIP4 profiling"
        default y
	depends on SCSC_WLAN
	---help---
	  This option enables HIP4 profiling

config SCSC_WLAN_DEBUG
	bool "Enable debug output from the SCSC Wifi driver"
	depends on SCSC_WLAN
	select SCSC_WLAN_HIP4_PROFILING
	---help---
	  This option enables debug support for the SCSC wifi chipset.

config SCSC_WLAN_SG
	bool "Enable SCSC WLAN Scatter-gather and GSO support"
	depends on SCSC_WLAN
        default y
	---help---
	  This option enables scatter-gather and GSO feature

config SCSC_WLAN_RX_NAPI
	bool "Enable use of net device napi rx polling api"
	default y
	---help---
	  This option enables the drivers use of the napi api

config SCSC_WLAN_RX_NAPI_GRO
	bool "Enable use of net device napi rx GRO"
	depends on SCSC_WLAN_RX_NAPI
	default y
	---help---
	  This option enables the drivers use of the napi Generic Receive Offload

config SCSC_WLAN_ANDROID
	bool "Android specific support"
	default y
	---help---
	  Enable support for Android specific aspects of the driver.

config SCSC_WLAN_STA_ONLY
	bool "Support WLAN STA only (no P2P/AP/IBSS)"
	default n
	---help---
	  Enable only basic STA mode for debugging purposes

config SCSC_WLAN_KIC_OPS
	bool "Wi-Fi service driver provides OPS for KIC to use for various tasks"
	depends on SAMSUNG_KIC
	default y
	---help---
	  Provide Wi-Fi service driver OPS, which KIC can use for triggering Wi-Fi related events.

config SCSC_WLAN_GSCAN_ENABLE
	bool "Enable GSCAN in SCSC wlan driver"
	default y
	---help---
	  This option enables GSCAN in SCSC wlan driver.

config SCSC_WLAN_WES_NCHO
	bool "Enable NCHO/WES feature"
	default y
	---help---
	  This option enables the NCHO/WES feature

config SCSC_WLAN_MUTEX_DEBUG
	bool "Enable Mutex debugging mechanism in slsi wlan driver"
	default y
	---help---
	  This option enables the Mutex debug reports in slsi wlan driver.

config CONFIG_SCSC_WLAN_BLOCK_IPV6
	bool "Block IPv6"
	default n
	---help---
	  This option blocks IPv6 packets.

config CONFIG_SCSC_WLAN_DISABLE_NAT_KA
	bool "Disable NAT"
	default n
	---help---
	  This option disables NAT.

config SCSC_WLAN_HANG_TEST
	bool "Test HANG Event"
	default y
	---help---
	   This option facilitates triggering of HANG Event
	   to reset WLAN.

config SCSC_WLAN_NAT_KEEPALIVE_DISABLE
	bool "Disable NAT KeepAlive"
	default n
	---help---
	  This option disables the NAT KeepAlive
	  Offload Feature.

config SCSC_WIFILOGGER
        tristate "Samsung SCSC Android Wi-Fi Logger"
        depends on SCSC_CORE
        default n

config SCSC_WIFILOGGER_DEBUGFS
        bool "Samsung SCSC Android Wi-Fi Logger DebugFS"
        depends on SCSC_WIFILOGGER && DEBUG_FS
        default y

config SCSC_WIFILOGGER_TEST
        bool "Samsung SCSC Android Wi-Fi Logger Test Harness"
        depends on SCSC_WIFILOGGER && SCSC_WIFILOGGER_DEBUGFS
        default n

config SCSC_WLAN_ENHANCED_LOGGING
	bool "Enable Enhanced Logging"
	depends on SCSC_WIFILOGGER
	default y
	---help---
	  This option enables the Enhanced Logging
	  Feature.

config SCSC_WLAN_ACM_API
	bool "Provide TSF read API"
	default n
	---help---
	  This option provides API to read TSF.

endif

config SCSC_WLAN_MAC_ADDRESS_FILENAME
	string "MAC address filename"
	default "/efs/wifi/.mac.info"
	---help---
	  Select the programmed MAC address file.

config SCSC_WLAN_MAX_INTERFACES
        int "Max number of virtual interfaces supported"
        range 1 12
        default 3
        ---help---
          The driver structures are sized to support this
          number of interfaces.

config SCSC_WLAN_AP_INFO_FILE
        bool "Create .softap.info file"
        default n
        ---help---
          The option enables the driver to create .softap.info
          file in user space and fill information in it.

config SCSC_WLAN_WIFI_SHARING
	bool "Wifi Sharing Support"
	default n
	---help---
	  This option tells if wifi sharing is supported or not.

config SCSC_WLAN_SAE_CONFIG
        bool "Wpa3 Support"
        default n
        ---help---
          This option tells if wpa3  is supported or not.

config SCSC_WLAN_ENABLE_MAC_RANDOMISATION
        bool "Wifi Mac Randomization Support"
        default n
        ---help---
          This option tells if mac randomization is supported or not.

config SCSC_WLAN_SINGLE_ANTENNA
	depends on SCSC_WLAN_WIFI_SHARING
	bool "Single Antenna Supported"
	default y
	---help---
	  This option tells if there is support for single
	  antenna or dual antenna.

config SCSC_AP_INTERFACE_NAME
        string "AP net device interface name"
        default "wlan1"
        ---help---
          AP net device interface name.

config SCSC_WLAN_ACS_ENABLE
        bool "ACS Support"
        default y
        ---help---
          This option tells if automatic channel selection is
	  supported or not.

config SCSC_WLAN_MHS_STATIC_INTERFACE
        bool "Static AP Interface Support"
        default n
        ---help---
          This option tells if AP interface has been created
          statically or dynamically.
          is enabled or not.

config SCSC_WLAN_PRIORITISE_IMP_FRAMES
        bool "Change priority of important frames such as DNS, MDNS, TCP SYN"
        default y
        ---help---
          The option enables the driver to prioritise important frames
          (such as DNS, MDNS, TCP SYN) so that they are sent ahead of others.

config SCSC_WIFI_NAN_ENABLE
        bool "Enable WiFi NAN"
        default n
        ---help---
          This option tells whether WiFi NAN is enabled or not.

config SCSC_WLAN_ENHANCED_PKT_FILTER
        bool "Enable enhanced packet filtering in suspend"
        default n
        ---help---
          This option tells if UDP packet filtering in suspend is
          supported or not.

config SCSC_WLAN_NUM_ANTENNAS
        bool "Enable configuring and fetching of number of antennas"
        default n
        ---help---
          This option tells whether configuring and fetching of number of antennas is enabled or not.

config SCSC_ENHANCED_PACKET_STATS
        bool "Enable enhanced packet stats"
        default n
        ---help---
          This option tells whether enhanced packet stats collection
          is enabled or not.

config SCSC_WLAN_LOW_LATENCY_MODE
        bool "Support enabling/disabling roaming as per latency mode"
        default n
        ---help---
          This option tells whether support is provided for enabling
          or disabling roaming as per the latency mode.

config SCSC_WLAN_SET_PREFERRED_ANTENNA
        bool "Enable the driver to set preferred antenna"
        default y
        ---help---
          This option enables the driver to set the preferred antenna.

config SLSI_WLAN_STA_FWD_BEACON
        bool "Forwarding beacon support"
	default y
        ---help---
          This option tells if beacon forwarding in STA mode is enabled or not.
          When it is enabled, Driver deliver beacon info of connected AP to Supplicant.

config SCSC_WLAN_STA_ENHANCED_ARP_DETECT
        bool "Enable enhanced arp detection"
        default n
        ---help---
          This option tells whether enhanced arp detection
          is enabled or not.

config SCSC_WLAN_SILENT_RECOVERY
	bool "Enable silent recovery"
	default n
	---help---
	This option tells if silent recovery is enabled or not.

config SCSC_WLAN_DUAL_STATION
        bool "Enable dual station"
        default n
        ---help---
        This option tells if dual station feature is supported or not.

config SCSC_WLAN_MAX_LINK_SPEED
        bool "Enable max link speed calculation"
        default n
        ---help---
        This option tells if max linkspeed calculation is enabled or not.

config SCSC_WLAN_ARP_FLOW_CONTROL
        bool "Enable ARP flow control between Host and FW"
        default y
        ---help---
        This option tells if ARP flow control between Host and FW is enabled or not.

config SCSC_WLAN_AP_AUTO_RECOVERY
        bool "Enable auto recovery for AP mode."
        default n
        ---help---
        This option tells if auto recovery in AP mode is enabled or not.

config SCSC_WLAN_DYNAMIC_ITO
        bool "Enable dynamic ito"
        default n
        ---help---
        This option tells if dynamic ito feature is supported or not.

config SCSC_WLAN_MAC_ACL_PER_MAC
        bool "Enable handling of MAC ACL list, received as multiple requests"
        default n
        ---help---
        This option tells if Driver handles MAC ACL list, received as multiple requests.

config SCSC_WLAN_ENHANCED_BIGDATA
        bool "Send SCSC panic records on HANGED_EVENT"
        default n
        ---help---
        Enable this option to send panic records when HANGED_EVENT
        is issued by the driver on FW panic.

config SCSC_WLAN_HE
        bool "Enable HE Capability in Driver"
        default n
        ---help---
        Enable HE Capability in Driver.

config SCSC_WLAN_RTT
        bool "Enable WiFi RTT"
        default n
        ---help---
          This option tells whether WiFi RTT is enabled or not.

config SCSC_WLAN_NW_PKT_DROP
        bool "Enable debugging for EAPOL/DHCP/ARP packet drop in Network Stack"
        default n
        ---help---
        This option enable the dumps for packets getting dropped in Network Stack.

config SCSC_WLAN_BSS_SELECTION
        bool "Select AP if bssid is not present"
        default n
        ---help---
        This option enable the selection of AP based on the BSSID hint.

config SCSC_WLAN_EXPONENTIAL_SCHED_SCAN
        bool "Enable exponential scheduled scan"
        default n
        ---help---
        This option enables the exponential scheduled scan.