578 lines
13 KiB
C
578 lines
13 KiB
C
|
/*
|
||
|
* Nomadik clock implementation
|
||
|
* Copyright (C) 2013 ST-Ericsson AB
|
||
|
* License terms: GNU General Public License (GPL) version 2
|
||
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
||
|
*/
|
||
|
|
||
|
#define pr_fmt(fmt) "Nomadik SRC clocks: " fmt
|
||
|
|
||
|
#include <linux/bitops.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/clk-provider.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/of_address.h>
|
||
|
#include <linux/debugfs.h>
|
||
|
#include <linux/seq_file.h>
|
||
|
#include <linux/spinlock.h>
|
||
|
#include <linux/reboot.h>
|
||
|
|
||
|
/*
|
||
|
* The Nomadik clock tree is described in the STN8815A12 DB V4.2
|
||
|
* reference manual for the chip, page 94 ff.
|
||
|
* Clock IDs are in the STn8815 Reference Manual table 3, page 27.
|
||
|
*/
|
||
|
|
||
|
#define SRC_CR 0x00U
|
||
|
#define SRC_CR_T0_ENSEL BIT(15)
|
||
|
#define SRC_CR_T1_ENSEL BIT(17)
|
||
|
#define SRC_CR_T2_ENSEL BIT(19)
|
||
|
#define SRC_CR_T3_ENSEL BIT(21)
|
||
|
#define SRC_CR_T4_ENSEL BIT(23)
|
||
|
#define SRC_CR_T5_ENSEL BIT(25)
|
||
|
#define SRC_CR_T6_ENSEL BIT(27)
|
||
|
#define SRC_CR_T7_ENSEL BIT(29)
|
||
|
#define SRC_XTALCR 0x0CU
|
||
|
#define SRC_XTALCR_XTALTIMEN BIT(20)
|
||
|
#define SRC_XTALCR_SXTALDIS BIT(19)
|
||
|
#define SRC_XTALCR_MXTALSTAT BIT(2)
|
||
|
#define SRC_XTALCR_MXTALEN BIT(1)
|
||
|
#define SRC_XTALCR_MXTALOVER BIT(0)
|
||
|
#define SRC_PLLCR 0x10U
|
||
|
#define SRC_PLLCR_PLLTIMEN BIT(29)
|
||
|
#define SRC_PLLCR_PLL2EN BIT(28)
|
||
|
#define SRC_PLLCR_PLL1STAT BIT(2)
|
||
|
#define SRC_PLLCR_PLL1EN BIT(1)
|
||
|
#define SRC_PLLCR_PLL1OVER BIT(0)
|
||
|
#define SRC_PLLFR 0x14U
|
||
|
#define SRC_PCKEN0 0x24U
|
||
|
#define SRC_PCKDIS0 0x28U
|
||
|
#define SRC_PCKENSR0 0x2CU
|
||
|
#define SRC_PCKSR0 0x30U
|
||
|
#define SRC_PCKEN1 0x34U
|
||
|
#define SRC_PCKDIS1 0x38U
|
||
|
#define SRC_PCKENSR1 0x3CU
|
||
|
#define SRC_PCKSR1 0x40U
|
||
|
|
||
|
/* Lock protecting the SRC_CR register */
|
||
|
static DEFINE_SPINLOCK(src_lock);
|
||
|
/* Base address of the SRC */
|
||
|
static void __iomem *src_base;
|
||
|
|
||
|
static int nomadik_clk_reboot_handler(struct notifier_block *this,
|
||
|
unsigned long code,
|
||
|
void *unused)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
/* The main chrystal need to be enabled for reboot to work */
|
||
|
val = readl(src_base + SRC_XTALCR);
|
||
|
val &= ~SRC_XTALCR_MXTALOVER;
|
||
|
val |= SRC_XTALCR_MXTALEN;
|
||
|
pr_crit("force-enabling MXTALO\n");
|
||
|
writel(val, src_base + SRC_XTALCR);
|
||
|
return NOTIFY_OK;
|
||
|
}
|
||
|
|
||
|
static struct notifier_block nomadik_clk_reboot_notifier = {
|
||
|
.notifier_call = nomadik_clk_reboot_handler,
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id nomadik_src_match[] __initconst = {
|
||
|
{ .compatible = "stericsson,nomadik-src" },
|
||
|
{ /* sentinel */ }
|
||
|
};
|
||
|
|
||
|
static void __init nomadik_src_init(void)
|
||
|
{
|
||
|
struct device_node *np;
|
||
|
u32 val;
|
||
|
|
||
|
np = of_find_matching_node(NULL, nomadik_src_match);
|
||
|
if (!np) {
|
||
|
pr_crit("no matching node for SRC, aborting clock init\n");
|
||
|
return;
|
||
|
}
|
||
|
src_base = of_iomap(np, 0);
|
||
|
if (!src_base) {
|
||
|
pr_err("%s: must have src parent node with REGS (%s)\n",
|
||
|
__func__, np->name);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* Set all timers to use the 2.4 MHz TIMCLK */
|
||
|
val = readl(src_base + SRC_CR);
|
||
|
val |= SRC_CR_T0_ENSEL;
|
||
|
val |= SRC_CR_T1_ENSEL;
|
||
|
val |= SRC_CR_T2_ENSEL;
|
||
|
val |= SRC_CR_T3_ENSEL;
|
||
|
val |= SRC_CR_T4_ENSEL;
|
||
|
val |= SRC_CR_T5_ENSEL;
|
||
|
val |= SRC_CR_T6_ENSEL;
|
||
|
val |= SRC_CR_T7_ENSEL;
|
||
|
writel(val, src_base + SRC_CR);
|
||
|
|
||
|
val = readl(src_base + SRC_XTALCR);
|
||
|
pr_info("SXTALO is %s\n",
|
||
|
(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
|
||
|
pr_info("MXTAL is %s\n",
|
||
|
(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
|
||
|
if (of_property_read_bool(np, "disable-sxtalo")) {
|
||
|
/* The machine uses an external oscillator circuit */
|
||
|
val |= SRC_XTALCR_SXTALDIS;
|
||
|
pr_info("disabling SXTALO\n");
|
||
|
}
|
||
|
if (of_property_read_bool(np, "disable-mxtalo")) {
|
||
|
/* Disable this too: also run by external oscillator */
|
||
|
val |= SRC_XTALCR_MXTALOVER;
|
||
|
val &= ~SRC_XTALCR_MXTALEN;
|
||
|
pr_info("disabling MXTALO\n");
|
||
|
}
|
||
|
writel(val, src_base + SRC_XTALCR);
|
||
|
register_reboot_notifier(&nomadik_clk_reboot_notifier);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* struct clk_pll1 - Nomadik PLL1 clock
|
||
|
* @hw: corresponding clock hardware entry
|
||
|
* @id: PLL instance: 1 or 2
|
||
|
*/
|
||
|
struct clk_pll {
|
||
|
struct clk_hw hw;
|
||
|
int id;
|
||
|
};
|
||
|
|
||
|
/**
|
||
|
* struct clk_src - Nomadik src clock
|
||
|
* @hw: corresponding clock hardware entry
|
||
|
* @id: the clock ID
|
||
|
* @group1: true if the clock is in group1, else it is in group0
|
||
|
* @clkbit: bit 0...31 corresponding to the clock in each clock register
|
||
|
*/
|
||
|
struct clk_src {
|
||
|
struct clk_hw hw;
|
||
|
int id;
|
||
|
bool group1;
|
||
|
u32 clkbit;
|
||
|
};
|
||
|
|
||
|
#define to_pll(_hw) container_of(_hw, struct clk_pll, hw)
|
||
|
#define to_src(_hw) container_of(_hw, struct clk_src, hw)
|
||
|
|
||
|
static int pll_clk_enable(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_pll *pll = to_pll(hw);
|
||
|
u32 val;
|
||
|
|
||
|
spin_lock(&src_lock);
|
||
|
val = readl(src_base + SRC_PLLCR);
|
||
|
if (pll->id == 1) {
|
||
|
if (val & SRC_PLLCR_PLL1OVER) {
|
||
|
val |= SRC_PLLCR_PLL1EN;
|
||
|
writel(val, src_base + SRC_PLLCR);
|
||
|
}
|
||
|
} else if (pll->id == 2) {
|
||
|
val |= SRC_PLLCR_PLL2EN;
|
||
|
writel(val, src_base + SRC_PLLCR);
|
||
|
}
|
||
|
spin_unlock(&src_lock);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void pll_clk_disable(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_pll *pll = to_pll(hw);
|
||
|
u32 val;
|
||
|
|
||
|
spin_lock(&src_lock);
|
||
|
val = readl(src_base + SRC_PLLCR);
|
||
|
if (pll->id == 1) {
|
||
|
if (val & SRC_PLLCR_PLL1OVER) {
|
||
|
val &= ~SRC_PLLCR_PLL1EN;
|
||
|
writel(val, src_base + SRC_PLLCR);
|
||
|
}
|
||
|
} else if (pll->id == 2) {
|
||
|
val &= ~SRC_PLLCR_PLL2EN;
|
||
|
writel(val, src_base + SRC_PLLCR);
|
||
|
}
|
||
|
spin_unlock(&src_lock);
|
||
|
}
|
||
|
|
||
|
static int pll_clk_is_enabled(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_pll *pll = to_pll(hw);
|
||
|
u32 val;
|
||
|
|
||
|
val = readl(src_base + SRC_PLLCR);
|
||
|
if (pll->id == 1) {
|
||
|
if (val & SRC_PLLCR_PLL1OVER)
|
||
|
return !!(val & SRC_PLLCR_PLL1EN);
|
||
|
} else if (pll->id == 2) {
|
||
|
return !!(val & SRC_PLLCR_PLL2EN);
|
||
|
}
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
struct clk_pll *pll = to_pll(hw);
|
||
|
u32 val;
|
||
|
|
||
|
val = readl(src_base + SRC_PLLFR);
|
||
|
|
||
|
if (pll->id == 1) {
|
||
|
u8 mul;
|
||
|
u8 div;
|
||
|
|
||
|
mul = (val >> 8) & 0x3FU;
|
||
|
mul += 2;
|
||
|
div = val & 0x07U;
|
||
|
return (parent_rate * mul) >> div;
|
||
|
}
|
||
|
|
||
|
if (pll->id == 2) {
|
||
|
u8 mul;
|
||
|
|
||
|
mul = (val >> 24) & 0x3FU;
|
||
|
mul += 2;
|
||
|
return (parent_rate * mul);
|
||
|
}
|
||
|
|
||
|
/* Unknown PLL */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
static const struct clk_ops pll_clk_ops = {
|
||
|
.enable = pll_clk_enable,
|
||
|
.disable = pll_clk_disable,
|
||
|
.is_enabled = pll_clk_is_enabled,
|
||
|
.recalc_rate = pll_clk_recalc_rate,
|
||
|
};
|
||
|
|
||
|
static struct clk_hw * __init
|
||
|
pll_clk_register(struct device *dev, const char *name,
|
||
|
const char *parent_name, u32 id)
|
||
|
{
|
||
|
int ret;
|
||
|
struct clk_pll *pll;
|
||
|
struct clk_init_data init;
|
||
|
|
||
|
if (id != 1 && id != 2) {
|
||
|
pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__);
|
||
|
return ERR_PTR(-EINVAL);
|
||
|
}
|
||
|
|
||
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
||
|
if (!pll)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
init.name = name;
|
||
|
init.ops = &pll_clk_ops;
|
||
|
init.parent_names = (parent_name ? &parent_name : NULL);
|
||
|
init.num_parents = (parent_name ? 1 : 0);
|
||
|
pll->hw.init = &init;
|
||
|
pll->id = id;
|
||
|
|
||
|
pr_debug("register PLL1 clock \"%s\"\n", name);
|
||
|
|
||
|
ret = clk_hw_register(dev, &pll->hw);
|
||
|
if (ret) {
|
||
|
kfree(pll);
|
||
|
return ERR_PTR(ret);
|
||
|
}
|
||
|
|
||
|
return &pll->hw;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* The Nomadik SRC clocks are gated, but not in the sense that
|
||
|
* you read-modify-write a register. Instead there are separate
|
||
|
* clock enable and clock disable registers. Writing a '1' bit in
|
||
|
* the enable register for a certain clock ungates that clock without
|
||
|
* affecting the other clocks. The disable register works the opposite
|
||
|
* way.
|
||
|
*/
|
||
|
|
||
|
static int src_clk_enable(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_src *sclk = to_src(hw);
|
||
|
u32 enreg = sclk->group1 ? SRC_PCKEN1 : SRC_PCKEN0;
|
||
|
u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
|
||
|
|
||
|
writel(sclk->clkbit, src_base + enreg);
|
||
|
/* spin until enabled */
|
||
|
while (!(readl(src_base + sreg) & sclk->clkbit))
|
||
|
cpu_relax();
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void src_clk_disable(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_src *sclk = to_src(hw);
|
||
|
u32 disreg = sclk->group1 ? SRC_PCKDIS1 : SRC_PCKDIS0;
|
||
|
u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
|
||
|
|
||
|
writel(sclk->clkbit, src_base + disreg);
|
||
|
/* spin until disabled */
|
||
|
while (readl(src_base + sreg) & sclk->clkbit)
|
||
|
cpu_relax();
|
||
|
}
|
||
|
|
||
|
static int src_clk_is_enabled(struct clk_hw *hw)
|
||
|
{
|
||
|
struct clk_src *sclk = to_src(hw);
|
||
|
u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
|
||
|
u32 val = readl(src_base + sreg);
|
||
|
|
||
|
return !!(val & sclk->clkbit);
|
||
|
}
|
||
|
|
||
|
static unsigned long
|
||
|
src_clk_recalc_rate(struct clk_hw *hw,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
return parent_rate;
|
||
|
}
|
||
|
|
||
|
static const struct clk_ops src_clk_ops = {
|
||
|
.enable = src_clk_enable,
|
||
|
.disable = src_clk_disable,
|
||
|
.is_enabled = src_clk_is_enabled,
|
||
|
.recalc_rate = src_clk_recalc_rate,
|
||
|
};
|
||
|
|
||
|
static struct clk_hw * __init
|
||
|
src_clk_register(struct device *dev, const char *name,
|
||
|
const char *parent_name, u8 id)
|
||
|
{
|
||
|
int ret;
|
||
|
struct clk_src *sclk;
|
||
|
struct clk_init_data init;
|
||
|
|
||
|
sclk = kzalloc(sizeof(*sclk), GFP_KERNEL);
|
||
|
if (!sclk)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
init.name = name;
|
||
|
init.ops = &src_clk_ops;
|
||
|
/* Do not force-disable the static SDRAM controller */
|
||
|
if (id == 2)
|
||
|
init.flags = CLK_IGNORE_UNUSED;
|
||
|
else
|
||
|
init.flags = 0;
|
||
|
init.parent_names = (parent_name ? &parent_name : NULL);
|
||
|
init.num_parents = (parent_name ? 1 : 0);
|
||
|
sclk->hw.init = &init;
|
||
|
sclk->id = id;
|
||
|
sclk->group1 = (id > 31);
|
||
|
sclk->clkbit = BIT(id & 0x1f);
|
||
|
|
||
|
pr_debug("register clock \"%s\" ID: %d group: %d bits: %08x\n",
|
||
|
name, id, sclk->group1, sclk->clkbit);
|
||
|
|
||
|
ret = clk_hw_register(dev, &sclk->hw);
|
||
|
if (ret) {
|
||
|
kfree(sclk);
|
||
|
return ERR_PTR(ret);
|
||
|
}
|
||
|
|
||
|
return &sclk->hw;
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_DEBUG_FS
|
||
|
|
||
|
static u32 src_pcksr0_boot;
|
||
|
static u32 src_pcksr1_boot;
|
||
|
|
||
|
static const char * const src_clk_names[] = {
|
||
|
"HCLKDMA0 ",
|
||
|
"HCLKSMC ",
|
||
|
"HCLKSDRAM ",
|
||
|
"HCLKDMA1 ",
|
||
|
"HCLKCLCD ",
|
||
|
"PCLKIRDA ",
|
||
|
"PCLKSSP ",
|
||
|
"PCLKUART0 ",
|
||
|
"PCLKSDI ",
|
||
|
"PCLKI2C0 ",
|
||
|
"PCLKI2C1 ",
|
||
|
"PCLKUART1 ",
|
||
|
"PCLMSP0 ",
|
||
|
"HCLKUSB ",
|
||
|
"HCLKDIF ",
|
||
|
"HCLKSAA ",
|
||
|
"HCLKSVA ",
|
||
|
"PCLKHSI ",
|
||
|
"PCLKXTI ",
|
||
|
"PCLKUART2 ",
|
||
|
"PCLKMSP1 ",
|
||
|
"PCLKMSP2 ",
|
||
|
"PCLKOWM ",
|
||
|
"HCLKHPI ",
|
||
|
"PCLKSKE ",
|
||
|
"PCLKHSEM ",
|
||
|
"HCLK3D ",
|
||
|
"HCLKHASH ",
|
||
|
"HCLKCRYP ",
|
||
|
"PCLKMSHC ",
|
||
|
"HCLKUSBM ",
|
||
|
"HCLKRNG ",
|
||
|
"RESERVED ",
|
||
|
"RESERVED ",
|
||
|
"RESERVED ",
|
||
|
"RESERVED ",
|
||
|
"CLDCLK ",
|
||
|
"IRDACLK ",
|
||
|
"SSPICLK ",
|
||
|
"UART0CLK ",
|
||
|
"SDICLK ",
|
||
|
"I2C0CLK ",
|
||
|
"I2C1CLK ",
|
||
|
"UART1CLK ",
|
||
|
"MSPCLK0 ",
|
||
|
"USBCLK ",
|
||
|
"DIFCLK ",
|
||
|
"IPI2CCLK ",
|
||
|
"IPBMCCLK ",
|
||
|
"HSICLKRX ",
|
||
|
"HSICLKTX ",
|
||
|
"UART2CLK ",
|
||
|
"MSPCLK1 ",
|
||
|
"MSPCLK2 ",
|
||
|
"OWMCLK ",
|
||
|
"RESERVED ",
|
||
|
"SKECLK ",
|
||
|
"RESERVED ",
|
||
|
"3DCLK ",
|
||
|
"PCLKMSP3 ",
|
||
|
"MSPCLK3 ",
|
||
|
"MSHCCLK ",
|
||
|
"USBMCLK ",
|
||
|
"RNGCCLK ",
|
||
|
};
|
||
|
|
||
|
static int nomadik_src_clk_show(struct seq_file *s, void *what)
|
||
|
{
|
||
|
int i;
|
||
|
u32 src_pcksr0 = readl(src_base + SRC_PCKSR0);
|
||
|
u32 src_pcksr1 = readl(src_base + SRC_PCKSR1);
|
||
|
u32 src_pckensr0 = readl(src_base + SRC_PCKENSR0);
|
||
|
u32 src_pckensr1 = readl(src_base + SRC_PCKENSR1);
|
||
|
|
||
|
seq_puts(s, "Clock: Boot: Now: Request: ASKED:\n");
|
||
|
for (i = 0; i < ARRAY_SIZE(src_clk_names); i++) {
|
||
|
u32 pcksrb = (i < 0x20) ? src_pcksr0_boot : src_pcksr1_boot;
|
||
|
u32 pcksr = (i < 0x20) ? src_pcksr0 : src_pcksr1;
|
||
|
u32 pckreq = (i < 0x20) ? src_pckensr0 : src_pckensr1;
|
||
|
u32 mask = BIT(i & 0x1f);
|
||
|
|
||
|
seq_printf(s, "%s %s %s %s\n",
|
||
|
src_clk_names[i],
|
||
|
(pcksrb & mask) ? "on " : "off",
|
||
|
(pcksr & mask) ? "on " : "off",
|
||
|
(pckreq & mask) ? "on " : "off");
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int nomadik_src_clk_open(struct inode *inode, struct file *file)
|
||
|
{
|
||
|
return single_open(file, nomadik_src_clk_show, NULL);
|
||
|
}
|
||
|
|
||
|
static const struct file_operations nomadik_src_clk_debugfs_ops = {
|
||
|
.open = nomadik_src_clk_open,
|
||
|
.read = seq_read,
|
||
|
.llseek = seq_lseek,
|
||
|
.release = single_release,
|
||
|
};
|
||
|
|
||
|
static int __init nomadik_src_clk_init_debugfs(void)
|
||
|
{
|
||
|
/* Vital for multiplatform */
|
||
|
if (!src_base)
|
||
|
return -ENODEV;
|
||
|
src_pcksr0_boot = readl(src_base + SRC_PCKSR0);
|
||
|
src_pcksr1_boot = readl(src_base + SRC_PCKSR1);
|
||
|
debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO,
|
||
|
NULL, NULL, &nomadik_src_clk_debugfs_ops);
|
||
|
return 0;
|
||
|
}
|
||
|
device_initcall(nomadik_src_clk_init_debugfs);
|
||
|
|
||
|
#endif
|
||
|
|
||
|
static void __init of_nomadik_pll_setup(struct device_node *np)
|
||
|
{
|
||
|
struct clk_hw *hw;
|
||
|
const char *clk_name = np->name;
|
||
|
const char *parent_name;
|
||
|
u32 pll_id;
|
||
|
|
||
|
if (!src_base)
|
||
|
nomadik_src_init();
|
||
|
|
||
|
if (of_property_read_u32(np, "pll-id", &pll_id)) {
|
||
|
pr_err("%s: PLL \"%s\" missing pll-id property\n",
|
||
|
__func__, clk_name);
|
||
|
return;
|
||
|
}
|
||
|
parent_name = of_clk_get_parent_name(np, 0);
|
||
|
hw = pll_clk_register(NULL, clk_name, parent_name, pll_id);
|
||
|
if (!IS_ERR(hw))
|
||
|
of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
|
||
|
}
|
||
|
CLK_OF_DECLARE(nomadik_pll_clk,
|
||
|
"st,nomadik-pll-clock", of_nomadik_pll_setup);
|
||
|
|
||
|
static void __init of_nomadik_hclk_setup(struct device_node *np)
|
||
|
{
|
||
|
struct clk_hw *hw;
|
||
|
const char *clk_name = np->name;
|
||
|
const char *parent_name;
|
||
|
|
||
|
if (!src_base)
|
||
|
nomadik_src_init();
|
||
|
|
||
|
parent_name = of_clk_get_parent_name(np, 0);
|
||
|
/*
|
||
|
* The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
|
||
|
*/
|
||
|
hw = clk_hw_register_divider(NULL, clk_name, parent_name,
|
||
|
0, src_base + SRC_CR,
|
||
|
13, 2,
|
||
|
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
|
||
|
&src_lock);
|
||
|
if (!IS_ERR(hw))
|
||
|
of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
|
||
|
}
|
||
|
CLK_OF_DECLARE(nomadik_hclk_clk,
|
||
|
"st,nomadik-hclk-clock", of_nomadik_hclk_setup);
|
||
|
|
||
|
static void __init of_nomadik_src_clk_setup(struct device_node *np)
|
||
|
{
|
||
|
struct clk_hw *hw;
|
||
|
const char *clk_name = np->name;
|
||
|
const char *parent_name;
|
||
|
u32 clk_id;
|
||
|
|
||
|
if (!src_base)
|
||
|
nomadik_src_init();
|
||
|
|
||
|
if (of_property_read_u32(np, "clock-id", &clk_id)) {
|
||
|
pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
|
||
|
__func__, clk_name);
|
||
|
return;
|
||
|
}
|
||
|
parent_name = of_clk_get_parent_name(np, 0);
|
||
|
hw = src_clk_register(NULL, clk_name, parent_name, clk_id);
|
||
|
if (!IS_ERR(hw))
|
||
|
of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
|
||
|
}
|
||
|
CLK_OF_DECLARE(nomadik_src_clk,
|
||
|
"st,nomadik-src-clock", of_nomadik_src_clk_setup);
|