lineage_kernel_xcoverpro/Documentation/ABI/testing/sysfs-bus-thunderbolt

113 lines
4.2 KiB
Plaintext
Raw Normal View History

2023-06-18 22:53:49 +00:00
What: /sys/bus/thunderbolt/devices/.../domainX/security
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute holds current Thunderbolt security level
set by the system BIOS. Possible values are:
none: All devices are automatically authorized
user: Devices are only authorized based on writing
appropriate value to the authorized attribute
secure: Require devices that support secure connect at
minimum. User needs to authorize each device.
dponly: Automatically tunnel Display port (and USB). No
PCIe tunnels are created.
What: /sys/bus/thunderbolt/devices/.../authorized
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute is used to authorize Thunderbolt devices
after they have been connected. If the device is not
authorized, no devices such as PCIe and Display port are
available to the system.
Contents of this attribute will be 0 when the device is not
yet authorized.
Possible values are supported:
1: The device will be authorized and connected
When key attribute contains 32 byte hex string the possible
values are:
1: The 32 byte hex string is added to the device NVM and
the device is authorized.
2: Send a challenge based on the 32 byte hex string. If the
challenge response from device is valid, the device is
authorized. In case of failure errno will be ENOKEY if
the device did not contain a key at all, and
EKEYREJECTED if the challenge response did not match.
What: /sys/bus/thunderbolt/devices/.../key
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: When a devices supports Thunderbolt secure connect it will
have this attribute. Writing 32 byte hex string changes
authorization to use the secure connection method instead.
Writing an empty string clears the key and regular connection
method can be used again.
What: /sys/bus/thunderbolt/devices/.../device
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute contains id of this device extracted from
the device DROM.
What: /sys/bus/thunderbolt/devices/.../device_name
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute contains name of this device extracted from
the device DROM.
What: /sys/bus/thunderbolt/devices/.../vendor
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute contains vendor id of this device extracted
from the device DROM.
What: /sys/bus/thunderbolt/devices/.../vendor_name
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute contains vendor name of this device extracted
from the device DROM.
What: /sys/bus/thunderbolt/devices/.../unique_id
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: This attribute contains unique_id string of this device.
This is either read from hardware registers (UUID on
newer hardware) or based on UID from the device DROM.
Can be used to uniquely identify particular device.
What: /sys/bus/thunderbolt/devices/.../nvm_version
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: If the device has upgradeable firmware the version
number is available here. Format: %x.%x, major.minor.
If the device is in safe mode reading the file returns
-ENODATA instead as the NVM version is not available.
What: /sys/bus/thunderbolt/devices/.../nvm_authenticate
Date: Sep 2017
KernelVersion: 4.13
Contact: thunderbolt-software@lists.01.org
Description: When new NVM image is written to the non-active NVM
area (through non_activeX NVMem device), the
authentication procedure is started by writing 1 to
this file. If everything goes well, the device is
restarted with the new NVM firmware. If the image
verification fails an error code is returned instead.
When read holds status of the last authentication
operation if an error occurred during the process. This
is directly the status value from the DMA configuration
based mailbox before the device is power cycled. Writing
0 here clears the status.